空调器用风冷冷凝器换热能力实验研究

实验测定了几种不同铜管、肋片组合的冷凝器在不同的风量和风机转速下的换热量，发现采用内螺纹铜管和迎风侧平片、背风侧冲缝片的冷凝器具有最优的换热性能。分析了多流路冷凝器中不同流路之间的制冷剂分配不均匀性和再热现象。     

稀土元素的分离技术

对目前稀土元素分离过程中几种常用的分离技术进行了综述，使用得较多的仍然是溶剂萃取法和离子交换法，而且新方法也在不断地出现。     

Kinetics of Zn and Pb evaporation from liquid iron

The evaporation kinetics of Zn and Pb from liquid iron at 1600°C were studied under argon pressure 0.1 to 50 bar in an induction furnace. It was found that the limiting step of evaporation under p_Ar < 1 bar is diffusion in the melt. Diffusion in the gas phase becomes rate-determining with increasing argon pressure. The phase boundary reaction has no effect on the evaporation of Zn and Pb. The evaporation of Zn can evidently be reduced by increasing argon pressure above 1 bar, while the evaporation of Pb is not significantly effected by changes of argon pressure.     

SiCp/2024复合材料的氢脆敏感性研究

在浸泡、阴极极化、阴极极化同时迭加拉伸变形、添加As₂O₃毒化剂等常见致氢条件下,通过慢应变速率拉伸试验研究了SiC_p/2024复合材料的力学性能,考察了断口形貌.测定了该材料在按几种常用充氢条件充氢后的氢含量.发现虽然强烈阴极极化使材料力学性能下降,但其原因在于阴极极化引起的碱性腐蚀,与氢脆无关.获得了不同于前人研究的新结论:在本文试验条件下SiC_p/2024材料不发生氢脆,也不发生不可逆氢损伤,其原因与该材料难以充入氢有关.     

循环流液相等电聚焦方法及应用研究

利用循环流液相等电聚焦技术，对Ｈｂ、Ｃｙｔ．Ｃ和ＢＳＡ混合物进行分离，对ＲＮａｓｅＡ粗制品进行精制。该方法上样量大，活性回收好。对聚焦过程中扩散、对流和电渗的影响进行了讨论。     

High density lipoprotein conversion mediated by human plasma phospholipid transfer protein

Phospholipid transfer protein (PLTP) was purified from lipoprotein-free human plasma, obtained upon treatment of plasma with dextran sulfate and Ca2+, by employing a series of column chromatography. Upon sodium dodecyl sulfate-polyacrylamide gel electrophoresis, the purified PLTP showed a single main band, corresponding to the molecular mass of 78 kDa. However, isoelectric focusing of the purified preparation gave multiple bands with pI ranging from 4.3 to 5.1, indicative of microheterogeneity. Purified PLTP was shown to possess not only phospholipid transfer activity, but also high density lipoprotein (HDL) conversion activity (Tu, A.-Y., Nishida, H. I., and Nishida, T. (1990), FASEB J. 4, A2148; Jauhiainen, M., Metso, J., Pahlman, R., Blomqvist, S., van Tol, A., and Ehnholm, C. (1993) J. Biol. Chem. 268, 4032-4036). Isolated HDL3 was enlarged to the size of HDL2b upon incubation with purified PLTP for 6 h at 37 degrees C at the PLTP/HDL3 molar ratio of approximately 1:45. Both the HDL conversion and the phosphatidylcholine transfer activities of purified PLTP were effectively inhibited by rabbit anti-PLTP immunoglobulin G. The primary importance of PLTP in the HDL enlargement that occurs in human plasma upon incubation at 37 degrees C was shown by the strong inhibitory effect of the anti-PLTP immunoglobulin G. The process of PLTP-mediated HDL enlargement was accompanied by the release of apoproteins, primarily apoA-I. HDL3 enlargement mediated by PLTP was effectively inhibited by the addition of free fatty acids.     

Effect of stress triaxiality levels in crack tip regions on the characteristics of void growth and fracture criteria

The behaviour of void growth in the crack tip regions of four specimen geometries with different stress triaxiality levels have been investigated by the FEM method and experimental observations in plane strain and plane stress cases respectively. It was found that the shape change of growing voids, the configurations of a blunting crack tip and the sizes of decreasing ligament between the void and the crack tip are strongly dependent upon the stress triaxiality levels. Under the condition of plane stress, the stress triaxiality on the ligaments of cracks are nearly the same for different specimen geometries, also the void growth, crack tip blunting asnd decreasing of ligament size are identical for various specimens with increasing load levels, which lead to the conclusion that the J_i-value is independent of specimen geometries. However, in the plain strain case, different void growth, crack tip blunting and decreasing in ligament size for various stress triaxiality levels directly caused the J_i-value to be dependent on the specimen geometries. It was found that when the void is linked to the blunting crack tip by the extrapolation to the zero ligament from FEM calculations, the J_i values, measured experimentally, are underestimated slightly.     

Highly active lanthanum doped nickel anode for solid oxide fuel cells directly fuelled with methane

Lanthanum doped nickel and YSZ composite anode (LaNi–YSZ) exhibited a greatly reduced polarization resistance and high performance for electrochemical oxidation of hydrogen and methane, which resulted from a fine anode structure with a high dispersion of nickel catalyst and a high catalytic activity towards methane.     

F150交换机告警关联规则的研究

为了提高电信网络运营效率，降低维护成本，电信运营企业在网络告警管理系统中需要引入数据挖掘技术。本文主要研究利用数据挖掘技术来进行故障的管理，即对告警进行关联性分析，详细分析了告警序列数据的关联规则挖掘算法，并在南昌本地网F150交换机的告警数据库中予以实现，同时对实际挖掘结果进行分析和整理，推导出一些实用的关联规则。