世界FPD的强势发展及其竞争态势

世界经济东移已成共识，20世纪是美国的世纪。21世纪是亚洲世纪。历史告诉我们：20世纪的标志性产业之一无疑是LSI。LSI是电子设备的心脏，正是它领导了电子工业的前进，当然地成了美国的重要战略产业。21世纪是视图时代，新世纪引领电子工业发展的是FPD，它是人与电子设备鲜活的界面，是提高和改善人类生活的重要一环，肯定是新世纪的标志性产业之一。事实证明，它已成为今天亚洲国家或地区的重要战略产业。 针对我国实际，作者2004年便提出了我国电子产业要由大变强，必需LSI与FPD“双业并举，共同发展”，不能再走先LSI后FPD的老路。为此，本刊不断发表文章，大力呼吁，愿智者垂听，愿读者赐教。[编者按]     

CPU电源电路用沟槽棚MOSFET与e-JFET开关管的功耗对比研究

本文主要针对低压功率开关管的功耗进行了理论分析，并在此基础上分别对两种典型结构槽栅MOSFET和e-JFET在不同工作频率 下的功耗分布和总功耗进行了定量的仿真计算和对比。通过研究发现，在一定工作条件下，常闭型e-JFET比目前常用的沟槽栅型MOSFET仅开关功耗就降低约24%，总功耗则降低约30%，将其运用于CPU电源电路中的开关功率管的制造，在高频领域有着极好的应用前景。     

A spatiotemporal representation of the electromagnetic field radiated by short-pulse superwideband antennas

It is shown that two approaches can efficiently be applied to calculate impulse responses of antennas radiating superwideband signals. The simultaneous use of these approaches makes it possible to lucidly describe the operation of certain antennas and substantially simplify the calculations. The impulse responses of some short-video-pulse scanning array antennas and the shapes of radiated signals are calculated.     

Exciton-polariton transition induced by elastic exciton-exciton collisions in ultrahigh quality AIGaAs alloys

The stationary and time-resolved polariton radiation in ultrahigh quality AIGaAs layers have been studied. It has been found that elastic exciton-exciton collisions lead to the appearance of a low-energy line of polariton radiation. We show that the rate of exciton-to-polariton transitions caused by elastic exciton-exciton collisions is determined not only by the density of the excitonic gas, but also by its temperature; this is in accordance with existing theoretical predictions. The text was submitted by the authors in English.     

Interfacial reactions of Sn-Ag-Cu solders modified by minor Zn alloying addition

The near-ternary eutectic Sn-Ag-Cu alloys have been identified as leading Pb-free solder candidates to replace Pb-bearing solders in microelectronic applications. However, recent investigations on the processing behavior and solder joints reliability assessment have revealed several potential reliability risk factors associated with the alloy system. The formation of large Ag₃Sn plates in Sn-Ag-Cu joints, especially when solidified in a relatively slow cooling rate, is one issue of concern. The implications of large Ag₃Sn plates on solder joint performance and several methods to control them have been discussed in previous studies. The minor Zn addition was found to be effective in reducing the amount of undercooling required for tin solidification and thereby to suppress the formation of large Ag₃Sn plates. The Zn addition also caused the changes in the bulk microstructure as well as the interfacial reaction. In this paper, an in-depth characterization of the interfacial reaction of Zn-added Sn-Ag-Cu solders on Cu and Au/Ni(P) surface finishes is reported. The effects of a Zn addition on modification of the interfacial IMCs and their growth kinetics are also discussed.     

Radiative recombination in Zn1-x MnxTe/Zn0.59Mg0.41Te quantum well structures: Exciton emission and intracenter luminescence

The luminescence spectra controlled by excitons and intracenter 3d emission of Mn²⁺ ions are studied for a series of Zn_1-x Mn_xTe/Zn_0.59Mg_0.41 Te quantum well (QW) structures that differ in manganese content and QW width. It is shown that the relative intensities of exciton emission of the QWs and barriers and the dependences of the intensities on the optical excitation level are controlled mainly by the manganese content in the QWs that affect the efficiency of excitons transfer of to the 3d shell of the Mn²⁺ ions. The effects of QW width and manganese content on the decay kinetics of the intracenter luminescence of the Mn²⁺ ions are studied.     

Photoemission of polarized electrons from InAlGaAs/GaAs superlattices with minimum conduction band offsets

Photoemission of polarized electrons from heterostructures based on InAlGaAs/GaAs superlattices with minimum conduction-band offsets is investigated. The comparison of the excitation energy dependence of the photoemission polarization degree with the calculated spectra make it possible to determine the polarization losses at different stages of the photoemission. A maximum polarization of P = 91% and a quantum yield of 0.14% are close to the best results obtained for photocathodes on the basis of strained semiconductor superlattices.     

双程放大技术在光纤放大器中的应用

双程放大技术是一种高效率、低成本的实用化放大技术。本文介绍了双程放大技术的优点及在各种放大器中的应用。     

拉远基站与系统设备的互联互通

随着3G牌照发放日期的逐步临近,人们对第3代移动通信(3G)的认识也更加清晰.2G与3G将融合发展,平滑过渡.2G业务增长的数据显示,2G还有很大的发展空间,2G与3G的过渡将是一个长期的过程.3G将首先在一些热点地区、业务量大的地方优先使用,在开始的时候没有必要大规模铺网,只需采用一些拉远基站就可以解决这些地区的3G覆盖问题.文章从网络应用的角度论述了拉远基站在未来3G组网中的重要作用,分析了目前部署3G拉远基站可能存在的问题,对互联互通、站址和网管等问题的解决方法提出了建议.     

Military multi-hop routing protocol

Military tactical network is one of the most important applications of ad hoc network. Currently the existing routing protocols are put forward based on the simple and universal network model which has the ability of multi-hop routing but cannot work efficiently in the special military applications. The narrow bandwidth and limited energy of the wireless network make general routing protocols seem to be more redundant. In order to satisfy military needs properly, this letter makes a detailed analysis of physical nodes and traffic distribution in military network, uses cross-layer design concept for reference, combines traffic characteristic of application layer with routing protocol design. It categorized routing problem as crucial routes and non-crucial routes which adopted separate maintenance methods. It not only realizes basic transmission function but also works efficiently. It is quite fit for military application.