福州市档案馆消防设计

本文介绍了甲级档案馆消防设计,探讨了在我国目前档案馆建设中如何选择经济适用的灭火系统,并提出了有关设计规范间存在互为矛盾的问题。     

循环经济与砖瓦工业--关于推动我国砖瓦工业走节能型建材之路的思考

论述了我国经济发展的矛盾与现实决定了砖瓦工业必须推进循环经济的发展和我国砖瓦工业树立和落实科学的发展观、优化资源利用方式,推进节能型墙体材料,发展循环经济、走可持续发展道路的基本对策.     

黄原胶接枝共聚物降滤失剂应用性能评价

黄原胶（XG）具有优良的耐盐性和增稠降滤失性能，但耐温性较差。对XG分子结构的分析认为，可利用XG链上的活泼基团接枝丙烯酰胺等乙烯基单体，增强其耐温性能，用作耐温抗盐钻井液处理剂。对比了合成的黄原胶丙烯酰胺等接枝共聚物（XGG）降滤失剂与XG在淡水、4％盐水和饱和盐水钻井液中的增粘降滤失性能和抗温性能，并通过岩心膨胀试验对比了XGG、XG和KCl对页岩的抑制性能。试验结果表明，在淡水钻井液中XGG具有极强的增粘效果和降滤失能力，远远超过XG1随着钻井液矿化度的提高，XGG的性能有一定下降，但XGG在各种钻井液中均具有比XG更好的高温增稠和控制失水的能力；XG已具有优良的抑制性，XGG的抑制性得到进一步提高。     

Novel blood-compatible waterborne polyurethane using chitosan as an extender

A series of novel block polymers of polyurethane (PU) and chitosan have been prepared in two steps. The first step is the preparation of PU prepolymer, obtained from polytetramethylene oxide glycol (PTMO, M_n = 1000), isophrone diisocyanate (IPDI), and 2,2′-dimethylol propionic acid (DMPA), followed by ionizing PU prepolymer with triethylamine (TEA). The second step involves PU chain-extended by water-soluble chitosan of low molecular weight (M_n = 5000) by self-emulsion polymerization method. The sizes of the latex particles, morphology, and copolymer architecture have been characterized by dynamic light scattering (DLS), general tensile test, infrared spectroscopy (IR), surface contact angle measurement, and transmission electron microscopy (TEM). Furthermore, it shows that the addition of chitosan remarkably increases anticoagulative property of PU elastomers confirmed by the recalcification time. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Thermoplastic vulcanizates obtained by reaction-induced phase separation: Interplay between phase separation dynamics,final morphology and mechanical properties

Reaction-induced phase separation (RIPS) of miscible blends of poly(?-caprolactone) (PCL) and an epoxy resin based on poly(propylene oxide) (PPO) was used to prepare thermoplastic vulcanizates (TPVs) with fine rubber dispersions. Scanning electron microscopy (SEM) confirmed the formation of cross-linked rubber particles dispersed in the thermoplastic matrix at PCL contents ≥20 wt%. The morphology development during phase separation was studied by optical microscopy (OM) and time-resolved small-angle light scattering (SALS). It was shown that higher curing temperatures lead to a decrease in rubber particle size, but at the same time lead to an increase in the extent of particle connectivity. In some cases, gelation of the PPO-rich phase limits full structure development, which leads to extensive connectivity between the dispersed rubber particles and a strong deterioration in tensile properties.     

Effects and properties of poly(arylene ether benzonitrile)s of various molecular weights blended with sulfonated poly(ether ether ketone)

Poly(arylene ether benzonitrile) (PAEBN) was synthesized with 2,6‐dichlorobenzonitrile and biphenol. PAEBNs with various molecular weights (MWs), 1,640,000 and 185,000 g/mol, were synthesized by control of the stoichiometry of the monomers and were blended with sulfonated poly(ether ether ketone) (SPEEK). The effects of MW on the water uptake, swelling, methanol permeability, and proton conductivity of the SPEEK/PAEBN blend membranes were investigated. The molecular mobility of the SPEEK/PAEBN blends was also examined in this study. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Performance study of linear and nonlinear diversity-combining techniques in synchronous FFH/MA communication systems over fading channels

Based on the Fourier-Bessel series and exponential characteristic function approach, the paper presents analytical bit-error-rate expressions for synchronous fast frequency-hopped spread-spectrum multiple-access systems over Rician fading channels with M-ary frequency-shift-keying modulation. Linear-combining, product-combining and clipper receivers are studied. Numerical results show that both the clipper and product-combining receivers perform significantly better than the linear-combining receiver. The clipper receiver with an optimum threshold level slightly outperforms the product-combining receiver. However, the product-combining receiver is the preferred diversity-combining method because it is completely nonparametric. In addition, the optimum diversity levels for various diversity-combining receivers over Rayleigh fading channels are higher than that of the Rician fading channels     

柳钢混铁炉炉衬结构及运行管理的技改实践

针对混铁炉使用过程中出现的各种侵蚀状况，设计采用砖砌十浇注复合炉衬结构，特别对前墙拐角和后墙中段等侵蚀快的关键部位作了有针对性的技术改进；在运行管理上，制定推行全新的工艺操作规程，取得了显著的使用效果。     

Limited reinforced space in segmental retaining walls

Current design of geosynthetic reinforced segmental retaining walls considers an a priori limitless length for reinforcement installation. Such length is typically 0.5–0.7 times the height of the wall. However, often there are constraints on such space; e.g., bedrock formation located at a small distance behind the facing. The objective of this note is to introduce a procedure for assessing the required long-term strength of the reinforcement while considering its limited length. Predictions by a conventional slope stability analysis were first checked against a continuum-mechanics based numerical analysis. Upon obtaining good agreement, a design chart was developed. The chart enables the determination of the reduction in the lateral earth pressure coefficient due to the constrained space. The revised earth pressure coefficient can be used with current analytical methods to account for the limited space. The results appear to be valid for conventional walls retaining a limited volume of soil. Comparison with limited experimental results for unreinforced backfill shows reasonably good agreement.