Characterisation of three different impellers using the LDV-technique

A characterisation of three commonly used impellers was made in this study by measuring local mean velocities and the fluctuations of these velocities with the LDV technique. The data was used to estimate volumetric flow, velocity fluctuations and turbulent intensity in the impeller region of the tank. The impellers investigated were a high flow impeller, a pitched blade turbine and a Rushton turbine. The cylindrical vessel used was made of Perspex, had a dished bottom (DIN 28013), was equipped with four baffles and had an inner diameter of 0.45 m. It was found that the bulk velocities could be scaled with the tip-speed of the impeller (ND). The flow rate at constant impeller speed increased in the order high flow impeller — Rushton turbine — pitched blade turbine. The corresponding order for the turbulence fluctuation is: high flow impeller — pitched blade turbine — Rushton turbine. The velocity profile of the flow out from the high flow impeller was furthermore, not as smooth as could be expected.     

Sludge Pre-Treatment through Ozone Application: Alternative Sludge Reuse Possibilities for Recirculating Aquaculture System Optimization

Recirculating Aquaculture Systems (RAS) reduce water consumption by efficient filtration to maintain appropriate levels of accumulating compounds and sludge. Sludge is mechanically separated by drum filters and disposed of to the detriment of overall system water budgets. Dissolved nitrogen compounds are reduced via nitrification–denitrification filters, requiring commercial external carbon sources. The reuse of sludge after ozone pre-treatment may represent the next step in RAS optimization. The present study analyzes the content of sludge from RAS and tests ozonation as a pre-treatment for recycling as carbon source. The dissociative effect of ozone and the physicochemical changes due to ozonation lead to a significant increase in soluble carbon availability. Predominantly long-chain fatty acid (FA) (saturated and unsaturated) with 16 and 18 carbon atoms independently of the treatment were found in the profiles. Saturated FA concentrations in solution increased after 20, 40, and 60 min ozonation. The solid content of the sludge was practically unaffected by ozonation in terms of FA profile: only saturated FA slightly increases after 40 min treatment. The implications of these findings for denitrifying bacteria are discussed.

Abbreviations: Recirculating Aquaculture Systems (RAS); Advanced Oxidation Processes (AOPs)     

Alteration of the Route to Menaquinone towards Isochorismate-Derived Metabolites

Chorismate and isochorismate constitute branch-point intermediates in the biosynthesis of many aromatic metabolites in microorganisms and plants. To obtain unnatural compounds, we modified the route to menaquinone in Escherichia coli. We propose a model for the binding of isochorismate to the active site of MenD ((1R,2S, 5S,6S)-2-succinyl-5-enolpyruvyl-6-hydroxycyclohex-3-ene-1-carboxylate (SEPHCHC) synthase) that explains the outcome of the native reaction with α-ketoglutarate. We have rationally designed variants of MenD for the conversion of several isochorismate analogues. The double-variant Asn117Arg–Leu478Thr preferentially converts (5S,6S)-5,6-dihydroxycyclohexa-1,3-diene-1-carboxylate (2,3-trans-CHD), the hydrolysis product of isochorismate, with a >70-fold higher ratio than that for the wild type. The single-variant Arg107Ile uses (5S,6S)-6-amino-5-hydroxycyclohexa-1,3-diene-1-carboxylate (2,3-trans-CHA) as substrate with >6-fold conversion compared to wild-type MenD. The novel compounds have been made accessible in vivo (up to 5.3 g L⁻¹). Unexpectedly, as the identified residues such as Arg107 are highly conserved (>94 %), some of the designed variations can be found in wild-type SEPHCHC synthases from other bacteria (Arg107Lys, 0.3 %). This raises the question for the possible natural occurrence of as yet unexplored branches of the shikimate pathway.     

The effect of gelation on statically and dynamically freeze-cast structures

Freeze-casting is a technique used to produce structures with anisotropic porosity in the form of well-defined microchannels throughout a sample. Here, this technique is used on the magnetocaloric ceramic La_0.66Ca_0.26Sr_0.07 Mn_1.05O₃. We show that a dynamic freezing profile, where the temperature is decreased continuously at −10 K/min, results in homogeneous, lamellar channels with widths of ∼15 µm, while static freezing, where the temperature is kept constant at 177 K, results in channels of increasing size away from the initial ice crystal nucleation site. The effect of gelation before freeze-casting is also investigated. Gelation inhibits ice crystal growth, which significantly changes the morphology by making channel cross sections less elongated, while additionally introducing more dendrites and ceramic bridges in the structure. The latter significantly dominates the flow path through the gelated structures, affecting the calculated tortuosity, which increases to τ ≈ 4 when compared to non-gelated samples where calculated tortuosities are in the range of ∼1.3 to ∼3. Finally, we present a systematic and automatic approach for evaluating channel and wall sizes and calculating tortuosities. This is based on analysis of images obtained by scanning electron microscopy using a continuous particle size distribution method and the TauFactor application in MATLAB^®.     

Dynamic processes of domain switching in lead zirconate titanate under cyclic mechanical loading by in situ neutron diffraction

The performance of ferroelectric ceramics is governed by the ability of domains to switch. A decrease in the switching ability can lead to degradation of the materials and failure of ferroelectric devices. In this work the dynamic properties of domain reorientation are studied. In situ time-of-flight neutron diffraction is used to probe the evolution of ferroelastic domain texture under mechanical cyclic loading in bulk lead zirconate titanate ceramics. The high sensitivity of neutron diffraction to lattice strain is exploited to precisely analyze the change of domain texture and strain through a full-pattern Rietveld method. These results are then used to construct a viscoelastic model, which explains the correlation between macroscopic phenomena (i.e. creep and recovered deformation) and microscopic dynamic behavior (i.e. ferroelastic switching, lattice strain).     

Identification and Function of Prothoracic Exocrine Gland Steroids of the Dytiscid Beetles Graphoderus cinereus and Laccophilus minutus

The chemical composition of the prothoracic defensive secretion of the water beetles Graphoderus cinereus and Laccophilus minutus was examined by gas chromatographic–mass spectrometric analysis of trimethylsilylated gland extracts. The main components are 3,11-dihydroxy-5-pregnan-20-one in G. cinereus and 3,12-dihydroxy-5-pregnan20-one in L. minutus. Fully saturated pregnanes have not been found in the prothoracic defensive glands of dytiscids before. Based on tests with synthetic compounds, their biological role was examined in a feeding assay with the minnow Phoxinus phoxinus. Agar pellets containing either steroid strongly deterred feeding.     

Synthesis and characterization of carbon-coated Li0.5Ni0.25TiOPO4 anode material

Li_0.5Ni_0.25TiOPO₄/C composite was synthesized by the co-precipitation method using polyethylene glycol as carbon source. X-ray diffraction study showed that the as-prepared material crystallizes in the monoclinic system (S.G. P2₁/c). This 3D structure exhibits an open framework favourable to intercalation reactions. The morphology and the microstructure characterisation was performed by scanning electron microscopy (SEM). Small particles (∼1 μm) coated by carbon were observed. Raman study confirms the presence of carbon graphite in the Li_0.5Ni_0.25TiOPO₄/C composite. Cyclic voltammetry (CV) and charge-discharge galvanostatic cycling were used to characterize its electrochemical properties. The Li_0.5Ni_0.25TiOPO₄/C composite exhibits excellent electrochemical performances with good capacity retention for 50 cycles. Approximately 200 mAh/g could be reached at C, C/2, C/5 and C/20 rates in the 0.5-3 V potential range. These results clearly evidenced the positive effect of the carbon coating on the electrochemical properties of the studied phosphate.     

Experimental investigation of an industrial scale black liquor gasifier. 1. The effect of reactor operation parameters on product gas composition

A novel technology to mitigate the climate changes and improve energy security is Pressurized Entrained flow High Temperature Black Liquor Gasification (PEHT-BLG) in combination with an efficient fuel synthesis using the resulting syngas. In order to optimise the technology for use in a pulp and paper mill based biorefinery, it is of great importance to understand how the operational parameters of the gasifier affect the product gas composition. The present paper is based on experiments where gas samples were withdrawn from the hot part of a 3 MW entrained flow pressurized black liquor gasifier of semi industrial scale using a high temperature gas sampling system. Specifically, the influence of process conditions on product gas composition (CO₂, CO, H₂, CH₄, H₂S, and COS) were examined by systematically varying the operational parameters: system pressure, oxygen to black liquor equivalence ratio, black liquor flow rate to pressure ratio and black liquor pre-heat temperature. Due to the harsh environment inside the gasification reactor, gas sampling is a challenging task. However, for the purpose of the current study, a specially designed high temperature gas sampling system was successfully developed and used. The results, obtained from two separate experimental campaigns, show that all of the investigated operational parameters have a significant influence on the product gas composition and present valuable information about to the process characteristics.