Structural and electrochemical properties of vanadium oxide thin films grown by d.c. and r.f. reactive sputtering at room temperature

Vanadium oxide thin films were grown at room temperature by direct current and radio-frequency reactive sputtering systems to compare the structural and electrochemical properties. Rutherford backscattering spectrometry and Fourier transform infrared measurements reveal that the composition of the as-deposited films consists of the V₂O₅ phase regardless of the deposition methods. Wide-angle X-ray diffraction measurements show that the crystallinity of the as-deposited V₂O₅ films is different depending on the deposition method. Films deposited by direct current reactive sputtering were amorphous, whereas films deposited by radio-frequency reactive sputtering were crystalline. Scanning electron microscopy measurements show that the V₂O₅ films grown by radio-frequency reactive sputtering had a large grain size but the films grown by direct current reactive sputtering were amorphous. Charge–discharge measurements taken at room temperature with a constant current clearly indicate that the films grown by direct current sputtering demonstrated typical amorphous behavior, whereas the V₂O₅ films grown by radio-frequency sputtering demonstrated the discharge behavior of crystalline V₂O₅. The origin of the structural and electrochemical properties of film grown by radio-frequency reactive sputtering is a self-bias effect. The self-bias effect induces ion bombardment during the growth of vanadium oxide thin film. These results suggest that direct current reactive sputtering is more desirable for growing amorphous V₂O₅ thin film than radio-frequency reactive sputtering.     

Effect of irradiation on the impact and seismic response of a spent fuel storage and transport cask

The spent fuel storage and transport cask must withstand various accident conditions such as fire, free drop and puncture in accordance with the requirement of the IAEA and domestic regulations. The spent fuel storage and transport cask should maintain the structural safety not to release radioactive material in any condition. And also the effects of the irradiation should be considered because the spent fuels stored in the cask for a long time and be possible to change the mechanical properties of the cask.In this study, the changed mechanical properties of the cask after irradiation for the 30 years storage periods are assumed and applied to the impact analysis using ABAQUS/Explicit code and seismic analysis using ANSYS code. The stress intensity on each part of the cask is calculated and the effects of irradiation are studied and structural integrity of the package is evaluated.     

Higher order eigensensitivity analysis of damped systems with repeated eigenvalues

A simplified method for the computation of first-, second- and higher-order derivatives of eigenvalues and eigenvectors associated with repeated eigenvalues is presented. Adjacent eigenvectors and orthonormal conditions are used to compose an algebraic equation. The algebraic equation which is developed can be used to compute derivatives of eigenvalues and eigenvectors simultaneously. Since the coefficient matrix in the proposed algebraic equation is non-singular, symmetric and based on N-space, it is numerically stable and very efficient compared to previous methods. To verify the efficiency of the proposed method, the finite element model of the cantilever beam and a mechanical system in the case of a non-proportionally damped system are considered.     

Design of the dummy coil for magnet power supply

It is necessary to test it on a dummy coil, before using a magnet power supply (MPS) to energize a Poloidal Field (PF) coil in the Korea Superconducting Tokamak Advanced Research (KSTAR) device. The dummy coil should accept the same large current from the MPS as the PF coil and be within the capability of the utilities located at the KSTAR site. Therefore a coil design based on the characteristics of the MPS and other restrictive conditions needed to be made. There are three requirements to be met in the design: an electrical requirement, a structural requirement, and a water cooling requirement. The electrical requirement was that the coil should have an inductance of 40 mH. For the structural requirement, the material should be non magnetic. The coil support structure and water cooling manifold were made of SUS 304. The water cooling requirement was that there should be sufficient flow rate so that the temperature rise ΔT should not exceed 12 °C for operation at 12.5 kA for 5 min. Square cross-section hollow conductor with dimensions of 38.1 mm × 38.1 mm was used with a 25.4 mm center hole for cooling water. However, as a result of tests, it was found that the electrical and structural requirements were satisfied but that the water cooling was over designed. It is imperative that the verification will be redone for a test with 12.5 kA for 5 min.     

A priori risk-informed approach to ensure the compliance with discharge limits for liquid radioactive effluent to be discharged from APR 1400

ABSTRACT

In order to develop a methodology to guarantee the conformance to operational discharge limits for liquid effluent from a NPP at an early stage of design, a risk-informed approach was proposed and its applicability was verified for APR 1400. Existing methodology to calculate risk-based detection limit for a single radionuclide was improved by incorporating a new model to derive more realistic pathway dose factors. A new simple expression was also proposed to adjust risk-based detection limits for multiple radionuclides mixture if necessary. In addition, a new procedure to warrant the compliance with discharge limits by controlling detection limits of only a few principal radionuclides was established in accordance with risk-informed concept. Through case studies for APR 1400 to be commissioned at a hypothetical site, it was shown that calculated pathway dose factors are more realistic for majority of radionuclides. It also turns out that neither present detection limits nor unadjusted risk-based detection limits can be justified when the radionuclide composition is unknown, however further adjustment of detection limits or increasing additional dilution factor resolves the problem. Finally, ten principal radionuclides were identified and shown to be enough for liquid effluent control at APR 1400 from a risk-informed point of view.     

Biomimetic micropatterning of silica by surface-initiated polymerization and microcontact printing

Micropatterns of silica on a gold substrate were generated by a biomimetic approach, namely, the biosilicification of silicic acids. The procedure consists of three simple steps: pattern generation of a polymerization initiator, (BrC(CH(3))(2)COO(CH(2))(11)S)(2), by microcontact printing; surface-initiated, atom-transfer radical polymerization of 2-(dimethylamino)ethyl methacrylate (DMAEMA) from the patterned area; and polycondensation of silicic acids. The tertiary amine-containing polymer, pDMAEMA, aided in the spatially controlled polycondensation of silicic acids on surfaces in the presence of phosphate ions, and micropatterns of silica on a gold substrate were successfully generated in combination with the technique of microcontact printing. The procedure could be extended to the controlled fabrication of silica patterns with any size, shape, or thickness.     

Effect of surface structure on biomechanical properties and osseointegration

The purpose of this study is to improve the bone-bonding ability between titanium implants and living bone through the control of geometric design and chemical compositions of an implant surface. We compared the tissue healing response and resulting implant stability for three surface designs by characterizing the histological and mechanical properties of the healing tissue around smooth-surfaced Ti–6Al–4V (SS), CP-Ti plasma-spray-coated (PSC), alkali- and heat-treated (AHT) implants. The implants were transversely inserted into a dog thighbone and evaluated at 4, 8, and 12 weeks. Histological examination indicated that initial matrix mineralization leading to osseointegration occurred more rapidly with the AHT implant. During the 4, 8, and 12 week healing periods, new bone on the surface of AHT implant showed denser growth than that on the SS and PSC implants. The more extensive tissue integration and more rapid matrix mineralization with the AHT implant were reflected in the mechanical test data, which demonstrated superior attachment strength and interfacial stiffness for the AHT implant after healing for 4, 8 and 12 weeks of healing because of the mechanical interlocking in the micrometer sized rough surface and the large bonding area between bone and implant caused by the nanosized porous surface structure. Histological and mechanical data demonstrate that with the appropriate surface design selection, bone bone-bonding ability can be improved and can induce acceleration of the healing response, thereby improving the potential for implant osseointegration.     

Applying the Technology Acceptance Model to Social Networking Sites (SNS): Impact of Subjective Norm and Social Capital on the Acceptance of SNS

With their heavy traffic and technological capabilities, social networking sites (SNS) introduced a new means of building and maintaining perceived social capital. This study aims to identify underlying factors and causal relationships that affect behavioral intention to use SNS. For this purpose, this research developed an extended technology acceptance model, incorporating subjective norm and perceived social capital for predicting SNS acceptance and usage. Exploratory correlation and path analyses were conducted to identify the relationships between five constructs: perceived usefulness, perceived ease of use, subjective norm, perceived social capital, and intention to use. The results showed that perceived usefulness and perceived ease of use had robust effects on the user's intention to use SNS. The research findings also demonstrated that subjective norm and perceived social capital were significant predictors of both perceived usefulness and perceived ease of use and therefore should be considered as potential variables for extending the technology acceptance model.     

Robust moving object detection against fast illumination change

To solve the problem due to fast illumination change in a visual surveillance system, we propose a novel moving object detection algorithm for which we develop an illumination change model, a chromaticity difference model, and a brightness ratio model. When fast illumination change occurs, background pixels as well as moving object pixels are detected as foreground pixels. To separate detected foreground pixels into moving object pixels and false foreground pixels, we develop a chromaticity difference model and a brightness ratio model that estimates the intensity difference and intensity ratio of false foreground pixels, respectively. These models are based on the proposed illumination change model. Based on experimental results, the proposed method shows excellent performance under various illumination change conditions while operating in real-time.     

A study on the factors that affect the adoption of Smart Water Grid

Due to recent climate changes that accompany drastic changes in water recycle process, extreme floods and droughts are occurring frequently throughout the world. In response to these events, Smart Water Management that refers to implement intelligent water information systems by IT convergence is considered as a new paradigm. In this study, we seek to explore the Smart Water Management, especially the adoption of Smart Water Grid Technology. We aim to review previous studies to identify factors that influence the adoption of the Smart Water Grid and to analyze the importance and priority of the factors affecting Smart Water Grid adoption, thereby presenting the successful adoption measures for Smart Water Grid in Korea. This study set a research model with the influencing factors in relation to the adoption of new IT technologies that were identified through the literature reviews of previous studies based on the TOE framework. This study also conducted empirical analysis of the findings and found out that the issue of privacy protection and security due to hacker’s attack would be emerged as a significant risk factor.