The extrusion of polymers below their melting temperatures by the application of high pressures

A number of polymers have been “cold” extruded (i.e. at temperatures well below their normal melting temperatures) by the application of relatively high pressures. In all cases extrudates of relatively large cross-sectional area have been produced, and non-circular cross-sections have also been extruded. The extruded products has been evaluated and the results discussed. In general it has been found that whilst extrusion gives an oriented product, the increase in tensile modulus is much less than for a comparably drawn fibre. This phenomenon has been discussed in terms of the changes in crystalline structure produced by extrusion.     

Kinetic theory of polymer crystal growth applied to melt crystallization of low molecular weight poly(ethylene oxide)

The kinetic theory of polymer crystal growth from the melt is extended to polymers with finite molecular weight and small numbers of folds per molecule. The theory is applied specifically to poly(ethylene oxide), where the most detailed experimental data are available on the growth of crystals from low molecular weight fractions. Predicted curves of growth-rate versus temperature show extensive qualitative agreement with experiment, including increasing chain-folding with increasing molecular weight or supercooling. In the theory this arises from the assumption that molecules have no freedom of lengthwise position within a surface nucleus. It may provide a general rationalization for chain-folding, but could possibly be a consequence of end-group pairing in the special case of OH-terminated poly(ethylene oxide). The theory also explains the sharpness of observed transitions between growth-modes with different numbers of folds per molecule, and the changes in shape of crystals near the transition. Reasonable quantitative agreement with experiment is found in the two cases of high molecular weight and high degrees of supercooling. For low molecular weights and small supercoolings, however, there is a large quantitative discrepancy between the predicted and observed separations of adjacent branches of each growth-rate/temperature curve. This appears to be inexplicable in terms of existing understanding of polymer crystal growth. An Appendix is given which outlines the effects on the theory of relaxing various assumptions of the growth model.     

Microstructure and origin of cross-tie fibrils in crazes

Crazes were grown in thin films of polystyrene (PS) at various temperatures and the resulting craze fibril microstructures were examined using low-angle electron diffraction (LAED). A quasi-regular array of cross-tie fibrils pull the main fibrils away from the tensile axis by an angle ± /2°. As a result, the LAED patterns from crazes grown at temperatures T<50°C exhibited split diffraction lobes centred about the equatorial axis of the LAED pattern. It was found that decreased with increasing crazing temperature and that the split lobes could no longer be resolved at the highest temperatures. Diffuse meridional diffraction spots due to scattering from the quasi-regular array of cross-tie fibrils were seen in the LAED patterns from crazes grown at low temperatures. The spacing of the cross-tie fibrils, R, determined from these patterns, was found to increase with the crazing temperature. A new model of craze widening was proposed that accounts for the formation of cross-tie fibrils by allowing some of the entangled polymer strands which bridge two fibrils in the active zone to survive fibrillation. Cross-tie fibrils are created when several such strands pile up locally, and the craze/bulk interface bypasses the pile-up.     

The fatigue life of contoured cobalt chrome posterior spinal fusion rods

Intraoperative contouring of posterior rods in lumbar arthrodesis constructs introduces stress concentrations that can substantially reduce fatigue life. The sensitivity of titanium (Ti) and stainless steel (SS) to intraoperative contouring has been established in the literature; however, notch sensitivity has yet to be quantified for cobalt chrome (CoCr), which is now being advocated for use in posterior arthrodesis constructs. The goal of this study is to evaluate the sensitivity of CoCr rods to intraoperative contouring for posterior lumbar screwrod arthrodesis constructs. In this paper lumbar bilateral vertebrectomy models are constructed based on ASTM F1717-01 with curved rods (26-30 degrees total curvature) and poly-axial pedicle screws. Three types of constructs are assembled: first, 5.5 mm SS rods with SS screws (6.5 x 35 mm), second, 6.0 mm Ti rods with Ti screws (7.5 x 35 mm), and third, 6.0 mm CoCr rods with Ti screws (7.5 x 35 mm). All specimens are tested at 4 Hz in dynamic axial compression-bending with a load ratio of ten and maximum load levels of 250, 400, and 700 N until run-out at 2 000 000 cycles. Results are presented that show that the fatigue life of CoCr constructs tend to be greater than Ti constructs at all levels. At the 400 N maximum loading, CoCr lasts an average of 350 000 cycles longer than the Ti constructs. The CoCr constructs are able to sustain the 250 N load until run-out at 2 000 000 cycles but they fail at high load levels (maximum 700 N). The CoCr constructs fail at the neck of the Ti screw at high loads whereas Ti screws fail at the notch induced by contouring. Since CoCr is compatible with magnetic resonance imaging and has high static strength characteristics, the results of this study suggest that it may be an appropriate substitute for Ti.     

Gingival recession and exposure of barrier membrane: effect on guided tissue regeneration of Class II furcation defects

The purpose of the present study was to evaluate the effect of barrier membrane exposure on the success of guided tissue regeneration in Class II furcation defects. Twenty-six subjects with mandibular Class II furcation defects received initial periodontal therapy followed by guided tissue regeneration surgery. The membrane was placed and the flaps were repositioned so that the membrane was totally submerged. Membranes were removed 4 to 6 weeks later, at which time the extent of their exposure was recorded. An overall improvement in all clinical parameters was observed for all subjects 1 year after surgery. Half of the patients had experienced no membrane exposure, while the other 13 subjects had experienced mild to pronounced exposure; both groups showed similar improvement in all clinical and surgical parameters. In light of the comparable results obtained in exposed sites, and the anatomic difficulties sometimes encountered in covering a membrane completely, in some of these cases the membrane may be left only partially submerged. This approach will allow for tighter occlusal "seal" of the tooth-membrane interface and preservation of the keratinized gingiva.     

Stabilization of optical characteristics of DNA cholesteric liquid-crystalline dispersions

Abnormal optical properties of liquid-crystalline dispersions (phases) formed as a result of phase exclusion of double-stranded DNA and RNA from water-salt poly(ethylene glycol) solutions and X-ray parameters of these phases are compared. It is shown that the cholesteric packing of nucleic acid molecules is realized at the certain osmotic pressure of a solvent only. A comparison of the optical properties of liquid-crystalline phases (dispersions) to their X-ray parameters allows one to put forward a suggestion on various hydratation (fluctuation) regimes of the nucleic acid behaviour under the condensed phases formation and factors, influencing the mode of packing of these molecules in phases formed. It is shown as well, that immobilization of DNA cholesteric liquid-crystalline particles in the content of polymeric matrix is accompanied by the stabilization of these particles and, hence, their specific abnormal optical activity as well as by formation of particles having a structure, which corresponds to the "optically isotropic ordered liquid" without abnormal optical activity. Data on stabilization of the cholesteric structure of liquid-crystalline DNA dispersions by creation of polymeric chelate bridges between the neighbouring DNA molecules, fixed in the structure of liquid-crystalline dispersions, are shown.     

Refining the level for anticipated hepatotoxicity in acetaminophen poisoning

Treatment of an acetaminophen overdose with N-acetyl cysteine usually is based on the position of the 4-h acetaminophen (APAP) level on the Rumack-Matthew nomogram; however, there is disagreement on the level at which clinically relevant hepatotoxicity occurs. A retrospective review of all acute adult formulation APAP exposures reported to our poison center between 1986 and 1993 was performed and cases corresponding to the "possible risk or toxicity" range on the nomogram were identified. Our current poison center protocol for APAP poisoning does not recommend treatment with N-acetylcysteine (NAC) in low-risk patients if the 4-h serum APAP level or the extrapolated equivalent falls within the possible toxicity range on the nomogram. Seventeen cases met the inclusion criteria for the study and received no NAC; six additional patients met inclusion criteria but received one or two doses of NAC before therapy was discontinued. No patients in either group demonstrated clinical evidence of hepatotoxicity. This pilot study suggests that patients with no risk factors and APAP levels in the "possible risk" range may not require NAC therapy.     

Experimental and clinical validation of auto- and allodermoplasty using transverse dermal micrografts in deep burns

A new method of autoallodermoplasty is proposed which is as follows: a patient's skin band is cut out 40 times less than the total area of the wound surface. The wound in the donor area is sutured tightly. The skin flap is dissected to thin transverse rectangular pieces with a special microdermatome or with a razor and then they are laid with their lateral side onto the wound and covered with the allo-skin. Experimental and clinical observations have shown that at remote terms both the anatomical and functional restitution of the integument occurred. The method is indicated for huge dermal defects of the "functionally passive" areas in patients with restricted, not big resources of the donor sites, especially in patients with high operative risk.     

Directional organization of eye movement and visual signals in the floccular lobe of the monkey cerebellum

The floccular lobe of the monkey is critical for the generation of visually-guided smooth eye movements. The present experiments reveal physiological correlates of the directional organization in the primate floccular lobe by examining the selectivity for direction of eye motion and visual stimulation in the firing of individual Purkinje cells (PCs) and mossy fibers. During tracking of sinusoidal target motion along different axes in the frontoparallel plane, PCs fell into two classes based on the axis that caused the largest modulation of simple-spike firing rate. For "horizontal" PCs, the response was maximal during horizontal eye movements, with increases in firing rate during pursuit toward the side of recording (ipsiversive). For "vertical" PCs, the response was maximal during eye movement along an axis just off pure vertical, with increases in firing rate during pursuit directed downward and slightly contraversive. During pursuit of target motion at constant velocity, PCs again fell into horizontal and vertical classes that matched the results from sinusoidal tracking. In addition, the directional tuning of the sustained "eye velocity" and transient "visual" components of the neural responses obtained during constant velocity tracking were very similar. PCs displayed very broad tuning approximating a cosine tuning curve; the mean half-maximum bandwidth of their tuning curves was 170-180 degrees. Other cerebellar elements, related purely to eye movement and presumed to be mossy fibers, exhibited tuning approximately 40 degrees narrower than PCs and had best directions that clustered around the four cardinal directions. Our data indicate that the motion signals encoded by PCs in the monkey floccular lobe are segregated into channels that are consistent with a coordinate system defined by the vestibular apparatus and eye muscles. The differences between the tuning properties exhibited by PCs compared with mossy fibers indicate that a spatial transformation occurs within the floccular lobe.     

Role of primate medial vestibular nucleus in long-term adaptive plasticity of vestibuloocular reflex

1. Fifteen hundred and thirty cells were recorded in the medial vestibular nucleus (MVN) of alert monkeys whose vestibuloocular reflex (VOR) had been adapted to one of two kinds of spectacles. The "high-gain" sample was recorded from monkeys that had worn 2.0 x telescopic spectacles; the gain of the VOR in the dark (eye velocity divided by head velocity) was greater than 1.5. The "low-gain" sample was recorded from monkeys that had worn goggles providing a visual field that was fixed with respect to the freely turning head; the gain of the VOR was less than 0.4. 2. Cells showing modulation of firing rate related to imposed head velocity were grouped into four categories: pure vestibular (10), vestibular-plus-saccade (10), vestibular-plus-position (10), and vestibular-plus-head/body (24). Sensitivity to head velocity was measured from averaged responses to sinusoidal, 0.4-Hz whole-body oscillation in the horizontal plane. Almost all cells (98%) having increased firing during ipsilateral head rotation received inputs from the horizontal semicircular canals. Conversely, 82% of cells having increased firing during contralateral head rotation received inputs from the vertical canals. 3. There were no statistically significant differences in resting discharge rate, phase shift, or sensitivity to head velocity between the high- and low-gain samples of any of the cell types. Nonetheless, there was a consistent tendency, evident in all the functionally defined cell groups, for the sensitivity to be about 20% greater in the high-gain samples. However, this difference is small by comparison with the fourfold difference in VOR gain. 4. Detailed scrutiny of the response properties of individual cells suggested that the small differences in sensitivity reflect small changes distributed throughout the population, rather than large and potentially significant changes within a small sub-population. 5. Our data indicate that large, adaptive changes in the gain of the VOR are accompanied by only minor changes in the vestibular sensitivity and no changes in the phase shift or resting discharge rates of cells in the MVN. It remains possible that large changes in vestibular sensitivity occurred in cells we did not sample or in subgroups we could not identify. We argue that this is unlikely and that the major changes underlying VOR plasticity occur after the first central synapse in the VOR pathways.