Exponential Stability of Interval Dynamical Systems with Quadratic Nonlinearity

This article proposes an approach for investigating the exponential stability of a nonlinear interval dynamical system with the nonlinearity of a quadratic type on the basis of the Lyapunov’s direct method. It also constructs an inner estimate of the attraction domain to the origin for the system under consideration.     

Frequency control techniques in coherent multichannel LAN's

This paper describes frequency control techniques for cold start and channel recognition functions in coherent multichannel local area networks. A Z-cut quartz etalon can be used to stabilize the optical transmitter frequencies. The capture range and the influence of humidity on a Fabry-Perot etalon are discussed. The frequency deviation of the optical transmitter was estimated to be less than ±1 GHz in the long term. A double AFC loop has been proposed for local LD frequency control. It showed a wide capture range of ±100 GHz. Coherent FDM receiver switching to the desired channel was demonstrated over a range from 0 to 40°C in an experiment     

Precipitation behavior of σ phase in fusion zone of dissimilar stainless steel welds during multi-pass GTAW process

The purpose of this study is to investigate the precipitation characteristics of σ phase in the fusion zone of stainless steel welds at various welding passes during a tungsten are welding (GTAW) process. The morphology, quantity, and chemical composition of the δ-ferrite and σ phase were analyzed using optical microscopy (OM), a ferritscope (FS), a X-ray diffractometer (XRD), scanning electron microscopy (SEM), an electron probe micro-analyzer (EPMA), and a wavelength dispersive spectrometer (WDS), respectively. Massive δ-ferrite was observed in the fusion zone of the first pass welds during welding of dissimilar stainless steels. The σ phase precipitated at the inner δ-ferrite particles and decreased δ-ferrite content during the third pass welding. The σ and δ phases can be stabilized by Si element, which promoted the phase transformation of σ→ϱ+λ₂ in the fusion zone of the third pass welds. It was found that the σ phase was a Fe−Cr−Si intermetallic compound found in the fusion zone of the third pass welds during multi-pass welding.     

A Survey on the Numerics and Computations for the Landau-Lifshitz Equation of Micromagnetism

The Landau-Lifshitz (LL)equation of micromagnetism governs rich variety of the evolution of magnetization patterns in ferromagnetic media. This is due to the complexity of physical quantities appearing in the LL equation. This complexity causes also an interesting mathematical properties of the LL equation: nonlocal character for some quantities,nonconvex side-constraints, strongly nonlinear terms. These effects influence also the numerical approximations. In this work, recent developments on the approximation of weak solutions, together with the overview of well-known methods for strong solutions,are addressed. Author is supported by the Fund for Scientific Research - Flanders FWO (Belgium).     

Intelligent copyright protection system using a matching video retrieval algorithm

Many video service sites headed by YouTube know what content requires copyright protection. However, they lack a copyright protection system that automatically distinguishes whether uploaded videos contain legal or illegal content. Existing protection techniques use content-based retrieval methods that compare the features of video. However, if the video encoding has changed in resolution, bit-rate or codec, these techniques do not perform well. Thus, this paper proposes a novel video matching algorithm even if the type of encoding has changed. We also suggest an intelligent copyright protection system using the proposed algorithm. This can serve to automatically prevent the uploading of illegal content. The proposed method has represented the accuracy of 97% with searching algorithm in video-matching experiments and 98.62% with automation algorithm in copyright-protection experiments. Therefore, this system could form a core technology that identifies illegal content and automatically excludes access to illegal content by many video service sites.     

A novel dynamic pricing scheme for contributing peers in the VoD system

In this paper we have proposed a dynamic pricing scheme for the contributing peers in the Video on Demand (VoD) system. The scheme provides an effective mechanism to maximize the profit through the residual resources of the contributing peers. A utilization function is executed for each contributing peer to estimate the utility factor based on the parameters such as initial setup cost, holding cost, chaining cost and salvage cost. In this paper, we urge an effective dynamic pricing algorithm that efficiently utilizes a range of parameters with a varying degree of complexity. The key findings of the algorithm are (i) each contributing peers are benefitted by the monetary based on its resource contributions to the VoD system and (ii) a high degree of social optimum is established by proficiently aggregating the contributing peer’s resources with the overall resources of the VoD system. We validate our claim by simulating the proposed dynamic pricing scheme with other standard pricing schemes such as altruism, cost model and game theory perspective. The result of our dynamic pricing scheme shows the best utility factor than other standard pricing schemes.     

Multidisciplinary optimization of gas-quenching process

Distortion as a result of the quenching process is predominantly due to the thermal gradient and phase transformations within the component. Compared with traditional liquid quenching, the thermal boundary conditions during gas quenching are relatively simple to control. By adjusting the gas-quenching furnace pressure, the flow speed, or the spray nozzle configuration, the heat-transfer coefficients can be designed in terms of both the component geometry and the quenching time. The purpose of this research is to apply the optimization methodology to design the gas-quenching process. The design objective is to minimize the distortion caused by quenching. Constraints on the average surface hardness, and its distribution and residual stress are imposed. The heat-transfer coefficients are used as design variables. DEFORM-HT is used to predict material response during quenching. The response surface method is used to obtain the analytical models of the objective function and constraints in terms of the design variables. Once the response surfaces of the objective and constraints are obtained, they are used to search for the optimum heat-transfer coefficients. This process is then used instead of the finite-element analysis. A one-gear blank case study is used to demonstrate the optimization scheme.