Investigation of various ionomer-coated carbon supports for direct methanol fuel cell applications

High-performance fuel cell electrodes require architectures that offer appropriate electrochemical and nanoscopic catalytic reaction zones. In this direction, ionomer (perfluoro sulfonic acid)-coated carbon supports were prepared by adopting a simple and cheap synthetic strategy to offer both electronic and protonic contacts to the catalyst particulates. Pt–Ru bimetallic anode catalysts were prepared on these modified carbon supports by a colloidal method. The role of surface area of carbon supports and the influence of ionomer content in them towards the catalytic activities of Pt–Ru catalysts has been probed by using three kinds of carbon black powders with different physical properties. Their electrocatalytic efficiencies toward methanol oxidation were scrutinized via half-cell measurements in cyclic voltammetry, chronoamperometry and electrochemical impedance spectroscopy. Catalysts particulates dispersed on carbon supports coated with ionomer exhibited better performance than those on the plain carbon supports, owing to the reduced micropores and increased interfacial area between catalyst particles and ionomer. Plain and modified carbon (MC) supports were characterized by using FTIR, BET-PSD and TEM techniques. Physico-chemical characterizations of supported catalyst systems were done by using XRD and TEM.     

Epoxidation of Propylene with Hydrogen Peroxide Over TS-1 Catalyst Synthesized in the Presence of Polystyrene

Titanium silicalite-1 (TS-1) catalyst was synthesized in the presence of polystyrene (PS) particles (denoted as TS-1_PS catalyst) for use in the epoxidation of propylene with hydrogen peroxide. For the purpose of comparison, TS-1 catalyst was also synthesized by a conventional method (in the absence of polystyrene particles). In the epoxidation of propylene, the TS-1_PS catalyst showed a higher conversion of hydrogen peroxide and a higher selectivity for propylene oxide (PO) than the TS-1 catalyst. Consequently, the TS-1_PS catalyst showed a higher yield for PO than the TS-1 catalyst. Characterization results showed that the high catalytic performance of TS-1_PS was attributed to the enhanced hydrophobic property of the catalyst and the suppressed formation of anatase TiO₂ in the catalyst.     

Chemical composition and anti-inflammatory effects of essential oil from Farfugium japonicum flower

In this study, the chemical composition and anti-inflammatory activities of hydrodistilled essential oil from Farfugium japonicum were investigated for the first time. The chemical constituents of the essential oil were further analyzed by GC-MS and included 1-undecene (22.43%), 1-nonene (19.83%), beta-caryophyllene (12.26%), alpha-copaene (3.70%), gamma-curcumene (2.86%), germacrene D (2.69%), and 1-decene (2.08%). The effects of the essential oil on nitric oxide (NO) and prostaglandin E2 (PGE(2)) production in lipopolysaccharide (LPS)-activated RAW 264.7 macrophages were also examined. The results indicate that the F. japonicum essential oil is an effective inhibitor of LPS-induced NO and PGE(2) production in RAW 264.7 cells. These inhibitory effects of the F. japonicum essential oil were accompanied by dose-dependent decreases in the iNOS and COX-2 mRNA expression. In order to determine whether F. japonicum essential oil can safely be applied to human skin, the cytotoxic effects of F. japonicum essential oil were determined by colorimetric MTT assays in human dermal fibroblast and keratinocyte HaCaT cells. F. japonicum essential oil exhibited low cytotoxicity at 100 mug/mL. Based on these results, we suggest that F. japonicum essential oil may be considered a potential anti-inflammatory candidate for topical application.     

Electrohydrodynamic drop-on-demand patterning in pulsed cone-jet mode at various frequencies

The patterning of a series of drops was investigated by the electrohydrodynamic printing method in the drop-on-demand fashion. A positive pulse voltage was applied to the capillary nozzle periodically to eject a pulsed liquid jet. The ejected jet was directed to the moving substrate, to which DC bias voltage was applied. High-speed imaging revealed that a Taylor cone was established at the nozzle tip during the ejection of the liquid jet, and that the jet directly struck the substrate to form a drop without the jet break-up. The frequency of drop generation can be controlled precisely, because the frequency of the pulsed voltage was almost same as the pulsating frequency of the liquid in pulsed cone-jet mode. The deposited patterns showed a series of uniformly sized drops with a regular spacing. At the pulse voltage frequency of 25 Hz, the diameter of the drops was approximately 95 μm. Using this drop-on-demand method, it is feasible to produce a variety of patterns of dots and continuous/discontinuous lines.     

Formation of silver nanoparticles created in situ in an amphiphilic block copolymer film

In this work, silver nanoparticles were synthesized with an amphiphilic diblock copolymer, polystyrene‐block‐poly(1‐vinyl‐2‐pyrrolidone) (PS‐b‐PVP), as a template film. First, microphase‐separated amphiphilic PS‐b‐PVP (70 : 30 wt %) was synthesized through atom transfer radical polymerization. The self‐assembled block copolymer film was used to template the growth of silver nanoparticles by the introduction of a silver trifluoromethanesulfonate precursor and an ultraviolet irradiation process. The in situ formation of silver nanoparticles with an average size of 4–6 nm within the block copolymer template film was confirmed with transmission electron microscopy, ultraviolet–visible spectroscopy, and wide‐angle X‐ray scattering. Fourier transform infrared spectroscopy also demonstrated the selective incorporation and in situ formation of silver nanoparticles within the hydrophilic poly(1‐vinyl‐2‐pyrrolidone) domains, which were mostly due to the stronger interaction strength of the silver with the carbonyl oxygens of poly(1‐vinyl‐2‐pyrrolidone) in the block copolymer. This work provides a simple route for the in situ synthesis of silver nanoparticles within a polymer film. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci 2008     

Synthesis and characterization of polypyrrole rod doped with p‐toluenesulfonic acid via micelle formation

Rod‐type polypyrrole (PPY) doped with p‐toluenesulfonic acid (TSA) was synthesized by chemical oxidative polymerization via a self‐assembly process. The shape of the PPY particles is mainly determined by the ratio of TSA/pyrrole (PY) and feed rate of the oxidant. Particle of different shapes (rod, grain, and partially rod) exhibit differences in morphology, electrical properties, dispersity, and thermal properties. Wide‐angle X‐ray diffraction patterning analysis was used to investigate the mechanism of rod formation. The effect of the TSA concentration on the PPY structure was investigated using Fourier transform infrared spectroscopy. The PPY rods doped with TSA exhibited better electrical conductivity than granular PPY doped with TSA, and their dispersity and thermal stability were also higher. Self‐orientation of PPY in the micelles of TSA and high crystallinity of the rod particles led to improved thermal stability. Hence, the decomposition temperature of the polymer chain was considerably increased. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2008     

Multi-dimensional spectral analysis of the noise contribution from a drum washer with a dehydrating condition

Recently, there has been a growing consumer interest in the amount of noise produced by household electrical appliances. The designer of the product must determine the source of the noise, in order to eliminate the source. In the case of a household electric appliance such as the washing machine, the consumer’s complaint was about the noise that is generated during the dehydrating condition. However, in the case of the washing machine, it is difficult to identify the noise source when the washing machine uses the dehydrating condition. Several noise sources combine making it difficult to determine the key factor that contributes to the noise output. Multi-Dimensional Spectral Analysis (MDSA) is a method that can remove the correlation between different noise sources, and it expresses the key contributing factor as a unique output. This study utilized MDSA to analyze the contribution of each noise source in the output during the dehydrating condition.     

Energy transfer-based multiplexed assay of proteases by using gold nanoparticle and quantum dot conjugates on a surface

Rapid and sensitive assay of proteases and their inhibition in a high-throughput manner is of great significance in the diagnostic and pharmaceutical fields. We developed a multiplexed assay system of proteases and their inhibition by measuring the energy transfer between quantum dots (QDs) and gold nanoparticles (AuNPs) on a glass slide. In this system, while the photoluminescence (PL) of donor QDs immobilized on a surface was quenched due to the presence of AuNPs (energy acceptor) in close proximity, the protease activity caused modulation in the efficiency of the energy transfer between the acceptor and donor, thus enabling the protease assay. In comparison to the QD-dye system, the conjugate of the QD-AuNP gave rise to higher energy transfer efficiency, resulting in quantitative assay of proteases with more sensitivity. When matrix metalloproteinase, caspase, and thrombin were tested, a multiplexed assay was successfully achieved since the AuNP could be used as a common energy acceptor in conjunction with QDs having different colors. Our system is anticipated to find applications in the diagnosis of protease-related diseases and screening of potential drugs with high sensitivity in a high-throughput way.     

Elastic-plastic fracture mechanics analyses of circumferential through-wall cracks between elbows and pipes

The present work proposes a method for elastic-plastic fracture mechanics analysis of the circumferential through-wall crack in weldment joining elbows and attached straight pipes, subject to in-plane bending. Heterogeneous nature of weldment is not explicitly considered and thus, the proposed method assumes cracks in homogeneous materials. Based on small strain finite element limit analyses using elastic-perfectly plastic materials, closed-form limit loads for circumferential through-wall cracks between elbows and straight pipes under bending are given. Then applicability of the reference stress-based method to approximately estimate J and crack opening displacement (COD) is evaluated. It was found that the limit moments for circumferential cracks between elbows and attached straight pipes can be much lower than those for cracks in straight pipes, particularly for a crack length of less than 30% of the circumference; this result is of great interest in practical cases. This result implies that, if one assumes that the crack locates in the straight pipe, limit moments could be overestimated significantly, and accordingly, reference stress-based J and COD could be significantly overestimated. For the leak-before-break analysis, accurate J and COD estimation equations based on the reference stress approach are proposed.