Haloacetic acids and trihalomethanes in finished drinking waters from heterogeneous sources

Trihalomethanes (THM) and haloacetic acids (HAA) are the most frequent chlorination by-products (CBP) in finished drinking waters. Traditionally, THM have been used as surrogates for CBP although the quantitative association between THM and other CBP is not well established. This problem is addressed in the present study from the analysis of THM and HAA in drinking water samples from four Spanish regions, representing areas with very different CBP composition, e.g. between 86 and 8.0 microg/l of THM and 50-3.0 microg/l of HAA.The resulting dataset exhibit a statistically significant correlation between total THM and HAA (Pearson's correlation coefficient, r(p)=0.815,p<0.0005). Furthermore, specific HAA are highly correlated with specific THM or their combinations. Accordingly, multivariate linear regression analysis of the concentrations observed show that the levels in total and specific HAA can be predicted from the THM content. These results are relevant for epidemiological studies on health effects from CBP exposure since they usually involve comparison of populations consuming waters of very distinct quality.     

A new mathematical model to evaluate simazine removal in three different immobilized-biomass reactors

A new mathematical model based on the cinetical Langmuir equation is developed to interpret and predict the effectiveness of simazine (SZ) removal in immobilized-biomass reactor (IBR), to consider herbicide-support affinity (Cx), and herbicide-cell affinity (Cy). Three solid supports: sepiolite monolith, granular sepiolite, and alginate were used in pilot-scale reactors that were inoculated with Klebsiella planticola DSZ. The abiotic process was analysed by measuring the SZ sorption capacity of the reactor supports. Sepiolite monolith showed the maximum value for herbicide-support affinity (28.02+/-0.9%). The effectiveness of the biotic process was estimated considering the formation of biomass and SZ biodegradation. Granular sepiolite showed either higher affinity with SZ and viability rate (0.90) throughout the process, and SZ removal rate was 3.39+/-0.06 mg/h. The mathematical model presented in this paper provides useful insights into the interpretation of experimental data as well as prediction for the implementation of biological reactors.     

Speciation of selenium in plant water extracts by ion exchange chromatography-hydride generation atomic absorption spectrometry

Determination of selenium (Se) speciation in plants is important in studying the bioavailability and toxicity of Se in Se-contaminated soil/sediment. In this study, we used an anion exchange resin (Dowex 1-10X) to separate Se into non-amino acid organic Se, Se-amino acids, selenite (Se [IV]) and selenate (Se [VI]) in a plant (Stanleya pinnata) extract. The hydride generation atomic absorption spectrometry (HGAAS) was used to determine concentrations of these Se compounds in plant extracts. Results showed that Se compounds can be quantitatively separated by the resin column. Recovery of five spiked standard Se compounds (trimethylselenonium ion (TMSe+), dimethylselenoxide (DMSeO), selenomethionine (Semet), Se [IV] and Se [VII]) in the plant extract ranged from 92.9 to 103%. Water extractable Se accounted for 60.4-72.6% of the total Se in the plant. Among the soluble Se compounds in the plant extract, Se-amino acids were 73-85.5%, Se [VI] ranged from 7.5 to 19.5% and non-amino acid organic Se was less than 7%. Se [IV] in most samples was below the detection limit (1 microg/g). This study showed that considerable amounts of the accumulated Se [VI] in the plant was metabolized to Se-amino acids during growth of the plant.     

The long-term evolutions and the regional characteristics of atmospheric methane concentrations in Nagoya, 1983-1997

This study provides information on the long-term evolutions of the atmospheric methane (CH4) concentrations in Nagoya City, Japan, which were analyzed by using the continuous monitoring data observed at the eight observatory stations for 1983-1997. The 15-year records of the atmospheric CH4 concentrations were examined by means of a time-series analysis using a fast Fourier transform with a low-pass filter to elucidate the seasonal cycles and the long-term trends. The annual averages of the CH4 concentrations in Nagoya were 1.85 ppmv (parts per million by volume), 1.91 ppmv, and 1.90 ppmv in 1988, 1995 and 1997, respectively. Moreover, the annual average growth rate showed a drastic decrease from 17 ppbv (parts per billion by volume) year(-1) in 1992 to 2 ppbv year(-1) in 1993, and further down to 7 ppbv year(-1) in 1997. Comparison of the atmospheric CH4 records in Nagoya with those in global air of the northern hemisphere observed at Mauna Loa observatory in Hawaii, USA, allows us to estimate the excess concentration of CH4 in the urban atmosphere of Nagoya, which was 0.17 ppmv in 1988 and 0.15 ppmv in 1997. On a local scale, the atmospheric CH4 concentrations in the northern part of Nagoya City increased until 1992 and then gradually decreased from 1993 to 1997, although those in the south-western urban areas constantly increased at the averaged growth rate of 13 ppbv year(-1) for 1988-1997. The variation of the long-term trends of the CH4 concentrations in Nagoya may be ascribed to the emission changes from the CH4 sources due to the human activities such as waste dumping and landfills.     

The effect of depositional history on contaminated bed sediment stability

Experiments were conducted in an annular flume using a commercially available kaolinite clay as well as contaminated bed sediment from Hamilton Harbour (Ontario) to assess their stability against erosion. Critical shear stress for erosion was measured under different conditions of bed formation (quiescently deposited beds and shear deposited beds) as well as with and without the presence of a biostabilized bed. Results suggest that a biostabilized bed and a bed formed under a flowing condition, similar to a river scenario, will be more resistant against erosion than will a non-biostabilized bed and a bed formed under quiescent conditions. Up to three cycles of erosion and flocculation/deposition were observed to occur within one experiment. These results suggest that the depositional history and biostabilization of river bed sediments need to be seriously considered within sediment and contaminant transport models if meaningful estimates of sediment and contaminant source, fate and effect are to be generated and used for the management of our aquatic ecosystems.     

Analysis of point load test as a method for preliminary geotechnical classification of rocks

This paper deals with the analysis of the point load compression test made on irregular-shaped rock fragments, proposed in the late 50’s by Protodiakonov. An ample revision of the literature on the subject has been made, and a series of tests, using seven different types of rock materials, has been developed. The results obtained from these tests showed that parameters generally used in literature to relate the unconfined compressive (or tensile) strength of materials, resulting from point load tests, can lead to scattered results, due mainly to the scale effect, of great evidence in such tests. It seems possible to obtain compressive (and tensile) strength of rocks, if the ratio between failure load and the distance between load application poins, with a 3/2 exponent, is considered, in field work, as being the "point load strength index".

---

Resume L’article présente une analyse critique de l’essai de compression sur échantillons irréguliers de roche, proposé par Protodiakonov vers la fin des années 50. Tout d’abord on a fait une révision de la littérature disponible sur le sujet et, après, une série d’essais sur sept types différents de matériaux. Les résultats obtenus ont montré que les paramètres plus utilisés, dans la littérature, pour définir la résistance à la compression (ou traction) des roches, d’après les essais ponctuels, peuvent provoquer une dispersion très importante des résultats. Cependant, il nous semble valable de suggérer la possibilité de déterminer, sur le chantier, la résistance à la compression (ou traction) des roches, si l’on considère le quotient entre la charge de rupture et la distance entre les deux points d’application de cette charge, le dénominateur à la puissance 3/2, comme "l’indice de charge ponctuelle".

     

Radon and 'King Solomon's Miners': Faynan Orefield, Jordanian Desert

Concentrations of 222Rn were measured in ancient copper mines which exploited the Faynan Orefield in the South-Western Jordanian Desert. The concentrations of radon gas detected indicate that the ancient metal workers would have been exposed to a significant health risk and indicate that any future attempt to exploit the copper ores must deal with the hazard identified. Seasonal variations in radon concentrations are noted and these are linked to the ventilation of the mines. These modern data are used to explore the differential exposure to radon and the health of ancient mining communities.     

Kinetics of microbial nitrification: nitrite-nitrogen oxidation

The kinetics of nitrite-nitrogen oxidation by enriched Nitrobacter cultures were examined under various temperatures (9°–35°C), pH (6.0–8.5), and microbial concentrations. For the substrate concentrations examined (100–1100 mg N1⁻¹) the reaction was zero order and correlations between temperature, pH, microbial concentrations and reaction rates were formulated. Inhibition by free ammonia and nitrous acid is discussed. This study of enriched cultures of nitrobacter organisms also provide some insight into the growth characteristics of this fastideous organism under conditions of dense population and severe environmental conditions (temperature and pH).