Statistical properties of out-of-frame detection schemes fordigital transmission systems

The importance of the misframe times for DS1 frame synchronization has often been addressed in designing and using network elements and mediation units. By extending the work of J. H. Eu and W. W. Rollins (1991), Markov chain first passage time analysis is used to derive higher moments of the misframe times in both random and burst error environments. This methodology is of great value in evaluating frame synchronization techniques for digital transmission systems. By experimenting with several out-of-frame detection schemes and reasonable values for bit error ratio (BER), it is shown that misframe times are always approximately exponentially distributed for all schemes     

Gain optimization for Yagi-Uda arrays

The author presents a personal account of the search for a design procedure for Yagi-Uda antenna arrays yielding a maximum gain, or directivity if element losses are neglected. Results on current distributions in the array are briefly reviewed. The analytical approach used to achieve gain optimization by means spacing and length perturbations is sketched. By using both spacing and length perturbations, it was possible to find the optimized array analytically in a systematic way, some examples having gain increases of nearly 80%. The effects of finite dipole radius and mutual coupling were included in the theoretical treatment     

In situ13C NMR study of tert-butanol interaction with moderately concentrated sulfuric acid

An in situ NMR study of tert-butanol dehydration in 95 and 85% sulfuric acid did not indicate the formation of tert-butyl cations as active reaction intermediates. Instead, only NMR lines from oxonium ions under the condition of fast exchange with water and the acid were observed. It is most likely that, in the concentrated acid, the active intermediates of this reaction are represented by tert-butyl sulfuric ester which probably is a precursor of invisible tert-butyl carbenium ions representing short-lived excited or transition states.     

pH control of the condensation reaction and its effect on the properties of formaldehyde/urea resins

The conditions of the preparation of formaldehyde/urea (F/U) resins have been supervised with the aim to reduce formaldehyde emission by influencing the ratio of methylene/dimethylene-ether-bridge linkages in the product. The most crucial point of this task is to keep the pH values of the reacting mixtures on the required level. The effect of formic acid, unevitably present in industrial formaldehyde solutions, was neutralized by applying a new buffer system, containing boric acid and ethylene glycol.     

Korrosionsuntersuchungen an ausgewählten metallischen Werkstoffen im System Essigsäure/Esigsäureanhydrid

Corrosion tests of selected metallic materials in the system acetic acid/acetic anhydride The corrosion behaviour of the ferritic austenitic stainless steels X2 CrNiMoN 22 5 (UNS S31803) and X2 CrNiMoN 25 7 4 (UNS S32750), the nickel base alloy NiMo16Cr16Ti (alloy C-4) and the titanium grades Ti2 (Grade 2) and Ti2Pd (Grade 7) was investigated by immersion tests in boiling mixtures of acetic acid and acetic anhydride in the presence of air. All materials tested were corrosion resistant in acetic acid and acetic anhydride but were corroded rapidly by the mixtures with a corrosion loss up to 1 mm/a, except the nickel base alloy (alloy C-4). It was corrosion resistant in all solutions with a corrosion loss not exceeding 0.01 mm/a. Electrochemical tests show that all materials tested exhibit stable passivity in glacial acetic acid and active corrosion in the presence of 10% acetic anhydride.     

Corrosion morphologies on magnesium alloy AZ 91

Initiation and early propagation of pitting and filiform corrosion on bare alloy AZ91 (9% Al, 1% Zn) are investigated by natural immersion corrosion tests, electrochemical measurements and microanalytical studies. Initiation sites are few. Corrosion spreads from these sites first in the form of filiform corrosion for a limited period of time and pitting which later develops into a cellular type of etching. The important factors affecting filiform corrosion are temperature, material structure and degree of polarization at the anodic sites. Filiform attack on AZ91, unlike the classical mechanisms of filiform corrosion on coated metals, is driven by hydrogen evolution reaction on the cathodic sites of the surface, occurs under significant anodic control, propagates at a high, constant speed independent of degree of polarization along preferential paths determined by compositional and crystallographic factors, and is a temporary phenomenon under open circuit conditions. Pitting corrosion is more predominant with decreasing anodic polarization.     

Low-temperature CV dispersion in MOS devices

A study is reported of the dispersion seen in the accumulation and depletion regions, of the C-V curve in n-channel MOS devices in the temperature range 30-45 K. It is concluded that the dispersion observed in these experiments is caused by time-constant effects, due to the substrate resistance and not caused by dopant atom emission time constant effects. From the measured admittance as a function of temperature and frequency, the acceptor energy level is determined to within ±0.4 meV     

Association of Escherichia coli O157:H7 with preharvest leaf lettuce upon exposure to contaminated irrigation water.

Recent foodborne outbreaks have linked infection by enterohemorrhagic Escherichia coli (EHEC) serotype O157:H7 to the consumption of contaminated lettuce. Contamination via food handler error and on-the-farm contamination are thought to be responsible for several outbreaks. Though recent studies have examined the application of EHEC to store-bought lettuce, little is known about the attachment of EHEC to growing plants. We investigated the association of lettuce seedlings with EHEC O157:H7 strains implicated in lettuce or fruit outbreaks using hydroponic and soil model systems. EHEC strains that express the green fluorescent protein were observed by stereomicroscopy and confocal laser scanning microscopy to determine adherence patterns on growing lettuce seedlings. Bacteria adhered preferentially to plant roots in both model systems and to seed coats in the hydroponic system. Two of five nonpathogenic E. coli strains showed decreased adherence to seedling roots in the hydroponic system. EHEC was associated with plants in as few as 3 days in soil, and contamination levels were dose-dependent. EHEC levels associated with young plants inoculated with a low dose suggested that the bacteria had multiplied. These data suggest that preharvest crop contamination via contaminated irrigation water can occur through plant roots.     

Zur Reaktivität von Tanninen in Abhängigkeit vom Kambialalter

Ohne Zusammenfassung