Corrosion phenomena on evaporated metal layers under electric stress

The metallization of insulating materials has gained great importance during the last few years. Vaporization in a high vacuum is increasingly employed. Today, glass, ceramic materials, and also organic insulating materials can be coated with a metal layer. While the coating of inorganic insulating materials is comparatively simple, the coating of organic materials causes difficulties. However, organic insulating materials with a metal layer offer a great variety of interesting new technical applications, e.g. in foil-type capacitors which require very thin foils. Nevertheless, during operation several problems can arise.     

Growth and characterization of GaAs films deposited on Ge/Si composite substrates by metalorganic chemical vapor deposition

We report the results of studies which have been made on heteroepitaxial layers of GaAs and AlGaAs grown by metalorganic chemical vapor deposition on composite substrates that consist of four different types of heteroepitaxial layered structures of Ge and Ge-Si grown by molecular beam epitaxy on (100)-oriented Si substrates. It is found that of the four structures studied, the preferred composite substrate is a single layer of Ge ∼1 μm thick grown directly on a Si buffer layer. The double-crystal X-ray rocking curves of 2 μm thick GaAs films grown on such substrates have FWHM values as small as 168 arc sec. Transmission electron micrographs of these Ge/Si composite substrates has shown that the number of dislocations in the Ge heteroepitaxial layer can be greatly reduced by an anneal at about 750° C for 30 min which is simultaneously carried out during the growth of the GaAs layer. The quality of the GaAs layers grown on these composite substrates can be greatly improved by the use of a five-period GaAs-GaAsP strained-layer superlattice (SLS). Using the results of these studies, low-threshold optically pumped AlGaAs-GaAs DH laser structures have been grown by MOCVD on MBE Ge/Si composite substrates.     

Excited state absorption of pump radiation as a loss mechanism insolid-state lasers

The characteristics of optical pumping dynamics in laser-pumped, rare-earth-doped, solid-state laser materials are investigated by using a tunable alexandrite laser to pump Y₃Al₅O₁₂ :Nd³⁺ in an optical cavity. It is found that the slope efficiency of the Nd laser operation depends strongly on the wavelength of the pump laser. For pump wavelengths resulting in low slope efficiencies, intense fluorescence emission is observed from the sample in the blue-green spectral region. This is attributed to the excited-state absorption of pump photons which occurs during radiationless relaxation from the pump band to the metastable state. This type of process is an important loss mechanism for monochromatic pumping of laser systems at specific pump wavelengths     

Evaluation of a system of wind tunnels for field studies of ammonia loss from grassland through volatilisation

Rates of ammonia (NH₃) loss from a ryegrass sward measured using a system of small wind tunnels were compared with concurrent measurements made using a micrometeorological mass balance method. Measurements were made during two experiments within a circular plot (radius 10m) treated with urea at a rate of 200kgNha^?1. In the first experiment, air speed through the tunnels was adjusted as necessary to maintain a value of approximately 1ms^?1. This value differed on most occasions from the mean ambient wind speed which was measured at a height of 250mm and which ranged from 0.61 to 2.95ms^?1. Rates of loss measured using the wind tunnels differed by a factor of between two and five from those measured using the mass balance method; there was no consistent pattern in the differences between the rates of loss. The total losses of NH₃ measured during 15 days were equivalent to 49.1 and 30.2kg Nha^?1 for the mass balance and wind tunnel methods, respectively. In the second experiment, air speed through the tunnels was adjusted as necessary to maintain a value as close as possible to the mean ambient wind speed measured at a height of 250mm. Rates of NH₃ loss measured using the two methods did not differ significantly; total losses of NH₃ during 17 days were equivalent to 96.9 and 101kg Nha^?1 for the mass balance and wind tunnel methods, respectively. The difference between the findings of the two experiments could be attributed to the direct effect of air speed through the tunnels rather than to differences between ambient temperatures and those inside the tunnels. During and following periods of rain the rates of loss measured using the tunnels were up to six times greater than those observed with the mass balance method. Rates of loss measured by the two methods became similar again when the tunnels were moved following rain. The study demonstrates that enclosures can be designed and operated to provide reliable measurements of the rate of NH₃ loss from grassland. Potential applications of the two methods are discussed.     

SED88: a Pascal program for the analysis of sedimentation equilibrium data

Analytical ultracentrifugation is commonly used for the determination of molecular weights (sedimentation equilibrium) and sedimentation coefficients (sedimentation rate) of biological macromolecules in solution. A Turbo Pascal program for the analysis of sedimentation equilibrium centrifugation data produced by absorbance optical systems is described. The user may enter data from a scan of absorbance versus distance from the centre of rotation, via a graphics tablet (or ASCII file). This is subsequently manipulated to yield an apparent weight average molecular weight for the given sample. Plots of ln (absorbance) versus (radius2) may also be produced. The method described uses readily available computational equipment requiring only a graphics tablet in addition to an IBM PC compatible computer. This technique and the software developed have been used to investigate the molecular weight range of two International Humic Substances Society (IHSS) reference samples from the Suwannee River.     

New chemical structural features of coal. The structure of coal products

The object of this paper is to demonstrate the usefulness of the transalkylation reaction for determining chemical structural features of products derived from coal. For example, the method is applied to derivatized coals, coals modified by thermolysis, and materials physically or chemically separated from coals. Data are presented for the pyridine soluble and insoluble parts of two coals, an O-methylated coal, a Birch reduced coal, a solvent refined coal, and a coke. Similarities and differences in chemical make-up of these materials are discussed.     

Effect of Salt, Sugar and Storage Time on Microbiological, Chemical and Sensory Properties of Chinese Style Dried Pork

A Chinese dried pork product was manufactured with combinations of 15, 22.5, and 30% sugar and 0.5, 1.5, and 2.5% salt and evaluated for microbiological, chemical and sensory properties at 0, 7, 14, and 21 days of storage. Aerobic and anaerobic plate counts and TBA values increased during storage with the high sugar and salt combination resulting in the least microbial growth. No major rancidity problems developed. A 30% sugar and 2.5% salted product resulted in the highest panel flavor scores when evaluated by a group of panelists from the Orient.     

Optimal control of auxiliary heating of passive-solar-heated buildings

Previous papers have demonstrated that low-cost off-peak electricity can be used to provide auxiliary heating for a passive-solar-heated residence. This paper describes the development of optimal control strategies for the operation of this auxiliary heating system. The temperature in the residence throughout the day as determined by computer simulation is presented for several optimal and conventional control strategies. The optimal control strategies improved the temperature control in the building compared to the conventional strategies. All strategies were shown to depend heavily on weather prediction. Computer simulations showed that errors in weather prediction had a small effect on heating cost and a large effect on being able to maintain the desired indoor temperature.     

A framework for a limitation policy of the population exposure to natural radiation in Belgium

The conclusions are put forward that are adopted by a discussion group preparing the framework for a limitation policy of the radon problem in Belgium. Existing and future situations are treated in a coherent policy that is adequate for practical implementation. An action level is defined, together with a hierachy of levels for new constructions. The decision logic for the acceptance of building materials is explained.