A Conflict Between Language and Atomistic Information

Minds and Machines -     

An over 2200-km coherent transmission experiment at 2.5 Gb/s usingerbium-doped-fiber in-line amplifiers

A 2223 km transmission distance was achieved with a 2.5-Gb/s heterodyne detection system that used erbium-doped-fiber in-line amplifiers and dispersion-shifted single-mode fibers. Twenty-five amplifiers, placed at approximately 80-km intervals, offered a total gain of more than 440 dB. Receiver sensitivity was -42.0 dBm, with only a 4.2-dB penalty from the initial sensitivity achieved by the back-to-back configuration     

Elastic, anelastic, and piezoelectric coefficients of langasite: resonance ultrasound spectroscopy with laser-Doppler interferometry

This paper presents advanced techniques to determine all independent elastic-stiffness coefficients C/sub ij/, the associated internal friction Q/sub ij//sup -1/, and piezoelectric coefficients e/sub ij/ of monocrystal langasite (La/sub 3/Ga/sub 5/SiO/sub 14/) using a single rectangular parallelepiped specimen. Langasite's crystal structure belongs to the trigonal system with point group 32, and thus possesses six independent C/sub ij/, two e/sub ij/, and two dielectric coefficients /spl epsiv//sub ij/. All of the elastic and piezoelectric coefficients affect the mechanical resonance frequencies of the solid specimen, and measuring them very accurately permits one to determine the C/sub ij/ and e/sub ij/ with known density, dimensions, and e/sub ij/. We developed a piezoelectric tripod to support the specimen upward and measured the free-vibration resonance frequencies with minimum load from its own weight. This weak and stable acoustic coupling ensures accuracy of the frequency measurement better than 10/sup -5/, enough to determine the coefficients reliably. Our C/sub ij/ fall in the range of results measured with previous (conventional) methods. Our e/sub 11/ is smaller than the reported values by 1.2-13%, and e/sub 14/ is larger by 44-97%. For the internal friction measurement, we used a solenoid coil to vibrate the specimen without any contact. The longitudinal-wave internal friction considerably exceeds the shear-wave internal friction, which can be explained by phonon-phonon interactions.     

Effect of biochemical storage on the denitrification potential of acetate in sequencing batch reactors.

This study evaluates the effect biochemical storage on the denitrification potential (N(DP)) of acetate. The fate of bacterial storage is evaluated in a sequencing batch reactor system operated in a sequence of anoxic/aerobic phases, fed with acetate as a pulse and continuously under anoxic conditions. N(DP) is defined based on system stoichiometry both for direct growth and storage on acetate. Experimental results do not support conceptual calculations based on system stoichiometry, yielding a higher denitrification potential, N(DP), for continuous feeding than the N(DP) obtained with pulse feeding, due to partial utilisation of the stored PHB within the anoxic phase. The nitrate, acetate and poly-beta-hydroxybutyrate (PHB) profiles obtained in the experimental studies were used in model calibrations for two different feeding patterns. Results of model simulations confirm the experimental results and evaluate the effects imposed on the denitrification potential by sludge age and the anoxic volume ratio.     

Effect of DULAPIX Ca thinning agent on the rheological properties of majolica slip

The use of a nontraditional electrolyte, DULAPIX Ca, in thinning of majolica paste allows reducing the moisture content of the slip. The degree of the decrease in the moisture content of the slip is a function of the hardness of the water: the higher the hardness, the greater the content of the electrolyte in the slip. For this reason, the hardness of the water must be monitored and softened water must be used in production of majolica slip.     

Recombination lifetime profiling in very thin Si epitaxial layersused for bipolar VLSI

A recently proposed measurement technique (P. Spirito and G. Cocorullo, IEEE Trans. Electron Devices, vol.ED-32, no.9, p.1708-13, 1985) to evaluate the recombination lifetime along epitaxial layers is used to characterize the quality of very thin Si epitaxial layers used for bipolar technology. The experimental results show the ability of the technique to give accurate and detailed information on the quality of epilayers that could be useful in monitoring and improving the growth process. The experimental results show that the lifetime values in thin epilayers are not correlated with doping profiles in the same layers; moreover, they are only slightly dependent on different processes used to make the test devices