Analysis of S-SEED''s characteristics in optical switch

This article introduces the basic structure of a symmetric self-electrooptic effect device （S-SEED）, and applies the Kirchoff＇ s current law and a purely equivalent capacitive model, to analyze S-SEED＇s switch characteristics. Linear approximation and N-segment approximation are utilized to obtain S-SEED＇s voltage-time （V-T） and characteristics. Theoretical analysis is verified by simulations, and the results demonstrate that the precision of S-SEED＇s switch time can satisfy the requirement in applications with linear approximation. Moreover, the simulations compare S-SEED＇s switch characteristics with different input powers and input contrast ratios, which reveal that increasing input contrast ratio is an effective way to improve S-SEED＇s switch characteristics.     

建筑物下采煤方法设计

论文针对了北掌矿井井田范围建(构)筑物多、压煤严重等特点,在分析比较充填开采和条带式开采等"建下"开采方法的技术上,确定了比较适合该矿的冒落条采法开采技术,指出新建矿井以建筑物下开采为主也可获得较好的经济社会效益。在此基础上,对条采工作面长度,保留煤柱宽度及主要指标进行了设计。     

Fractal Nature of Crack Growth under Different Temperature

We have studied numerically a simple crack growth model in a two-dimensional triangular lattice of bonds and nodes which incorporates the sudece of a growing crack bond-breaking probability Pi~ exp{(-Vi+Ei)φ(T)}, where Ei is elastic eneny stored in the i-th bond. Different energy temperature factors φ(T) are employed during crack formation and propagation process with a uniform dilation strain case and a shear case and with periodic boundary condition in the horizontal direction. Our results show that the patterns of the cracks generated are fractal structure and the effective fractal dimensionalities decrease with the increase of the temperature factor φ(T)(the absolute temperature T decreasing). In the paper we also discuss the relation between the effective fractal dimension Deff (the radius Rg Of gyration) and the fractal dimensions D (the radius R of circular), and also give their modification values Ω about two kinds of methods in the lattice model     

水磨沟倒虹吸管工程设计

水磨沟倒虹吸管是甘肃省引大入秦灌溉工程总干渠上的大型跨沟建筑物，为双管桥式倒虹吸，具有工作水头高，输水流量大，管线长，管径大的特点，其综合工程规模位居国前列，6年的运行实践证明，工程设计合理，运行可靠。其工程设计的成功经验对类似工程具有参考价值。     

潜孔锤冲击作用下土体变形的有限元分析

潜孔锤冲击挤密钻进过程中周围土体的变形机理是一个高度非线性问题。针对潜孔锤在土中的面-面接触问题,运用Drucker-Prager屈服准则为判据,将土体视为DP材料,通过钻具与土之间的接触及施加冲击载荷来模拟钻进过程,从而建立了潜孔锤在土中冲击挤密钻进的有限元模型。利用非线性瞬态动力学有限元分析手段,对钻进过程中冲击力对土的作用加以研究,分析了钻具周围土体的应力、应变以及钻具与土体的摩擦情况。结果表明,在冲击载荷作用下,锥形钻头前端土体应力集中,并形成应力泡,冲击功主要用于竖向压缩土体,而水平方向的挤压作用相对较小,摩擦应力在钻头锥面附近出现峰值,是影响钻进速度的主要原因之一。     

蒙古泰西尔坝碾压混凝土的斜层铺筑法

蒙古泰西尔水电站大坝为碾压混凝土重力坝,文中主要介绍了碾压混凝土斜层浇筑法的基本原理,施工工艺和施工中存在的问题及对策.     

（1S，2S，5R）-薄荷基取代烯烃的合成

以(L)-薄荷基氯为原料,通过薄荷基氯化镁分别与烯丙基溴、2-甲基-3-氯丙烯、1-溴-3-甲基-2-丁烯在Cul催化下发生偶联反应,首次合成了3-(1S,2S,5R)-薄荷基-1-丙烯,2-甲基-3-(1S,2S,5R)-薄荷基-1-丙烯和2-甲基-4-(1S,2S,5R)-薄荷基-2-丁烯,总收率分别为80.5%、83.1%和79.6%.探讨了影响反应的多种因素,找到了较好的合成条件,并用IR、 1HNMR和元素分析对产物进行了表征.     

浅议第一方检测认可实验室管理心得

本文结合实际情况,具体阐述了作为第一方检测认可实验室在日常管理工作中面临的问题和解决思路,对提高日常实验室管理水平提出了个人观点.     

阳泉市煤矿采空区地质因素对公路的破坏

介绍了阳泉市煤矿采空区对公路建设所造成的危害，对其上覆岩层变形破坏的地质因素及其破坏机理作了分析，指出应该采取各种措施减少对公路的破坏。     

Industrialization of High Performance Sintered NdFeB Magnets

Sintered Nd-Fe-B magnet was manufactured by advanced equipment via a SC (Strip casting) technology.It has integrative performance.