RBS/channelling study of ion-implanted and proton-exchanged LiNbO3:Nd:MgO planar waveguides

We present a structural study of two Nd³⁺/MgO codoped LiNbO₃ waveguides fabricated by two different methods: ion-implantation and proton-exchange. Rutherford backscattering spectrometry in combination with channelling was used to study the influence of the waveguide fabrication method on the possible modification of the LiNbO₃ crystal structure within the waveguiding layer. The results show that the ion-implanted waveguide mainly maintains the same properties as the virgin crystal, apart from a deterioration of a thin surface layer, whilst the proton-exchanged waveguide exhibits a quite different behaviour, although its surface is less damaged.     

Extensive thrombophlebitis with reactive thrombocytosis in a high risk Chinese parturient associated with retained placenta increta: a case report

Forty-three patients with spastic quadriplegia (mean age 7.9 years, range 3.3 to 17.2 years) underwent bone mineral density (BMD) measurement of the lumbar spine and were evaluated between 2.6 and 5.5 years (mean 3.8) later to determine whether this measurement had predicted risk of fracture over the subsequent period of observation. Other potential risk factors that were evaluated include body weight z score, serum vitamin D levels, previous fracture, and hip spica casting. The baseline measurements showed that BMD falls further below normal with increasing age and was more than one standard deviation below age-matched normal mean in 38 of the 43 patients. Fracture rate did not differ between those with low and those with very low spinal BMD. Similarly, serum vitamin D levels and body weight z scores were not predictive of fracture. However, fracture rate was over fourfold greater following spica casting and more than threefold greater following an initial fracture. Fracture rates in the study group were similar to those reported for age- and sex-matched normal children, though generally the location of the fractures and mechanisms of injury differed.     

Ultrastructural co-localization of calmodulin and B-50/growth-associated protein-43 at the plasma membrane of proximal unmyelinated axon shafts studied in the model of the regenerating rat sciatic nerve

Calmodulin and de-phosphorylated B-50/growth-associated protein-43 (GAP-43) have been shown to bind in vitro in a molecular complex, but evidence for an in situ association in the nervous system does not exist. Previously, we have reported that, in the model of the regenerating rat sciatic nerve, the B-50/GAP-43 immunoreactivity is increased and concentrated at the axolemma of unmyelinated axons located proximal to the site of injury and axon outgrowth. To explore a putative function of B-50/GAP-43, namely, the capacity of binding calmodulin to the plasma membrane, we examined the ultrastructural distribution of calmodulin in the proximal unmyelinated axon shafts of this model, using double immunolabelling and detection by fluorescent or gold probes conjugated to second antibodies. Immunofluorescence showed that seven days post-sciatic nerve crush the calmodulin immunoreactivity, similar to B-50/GAP-43 immunoreactivity, was intense in unmyelinated axon shafts located proximal to the site of injury of the regenerating nerve. Ultrastructurally, calmodulin was located at the axolemma of these regenerating unmyelinated axon shafts and inside the axoplasm, where it was associated with vesicles and microtubules. The plasma membrane labelling (approximately 69%) was significantly higher than the axoplasmic labelling. Over 60% of the plasma membrane-associated calmodulin co-localized with B-50/GAP-43 in a non-random distribution. Since normally calmodulin is largely present in the cytoplasm, these data suggest that calmodulin has been concentrated at the plasma membrane of unmyelinated axons, most probably by B-50/GAP-43. If the concentrating effect is due to B-50/GAP-43, then there is a possibility that these proteins may be present as a molecular complex in situ. The physiological significance could be that this association regulates the local availability of both B-50/GAP-43 and calmodulin for other interactions.     

The neurotrophic analogue of ACTH(4-9) reduces the perineuronal microglial reaction after rat facial nerve crush

Rats bled to a severe condition of volume-controlled hemorrhagic shock were randomly assigned to one of the following treatments: (1) saline, 1 ml/kg i.v.; (2) saline, 0.2 ml/kg per min i.v. for 10 min; (3) ACTH-(1-24), 160 micrograms/kg i.v.; 4) methylprednisolone, 40 mg/kg i.v.; (5) methylprednisolone, 80 mg/kg i.v.; (6) aprotinin, 10,000 KIU/kg i.v.; (7) norepinephrine, 5 micrograms/kg per min i.v. for 10 min; (8) norepinephrine, 10 micrograms/kg per min i.v. for 10 min. All rats treated with saline or with either of the two doses of methylprednisolone, and half of the rats treated with aprotinin, died within the subsequent 2 h. On the other hand, rats treated with norepinephrine, at either dose, or with ACTH-(1-24) were all still alive 2 h later, a similar improvement in cardiovascular and respiratory parameters being obtained with the two treatments. The effect of ACTH on mean arterial pressure was however more sustained throughout the observation period. These results further support the potential usefulness of ACTH-(1-24) as first-aid treatment in cases of severe blood losses.     

Sheet molding compound characterization using spiral flow

Sheet molding compound (SMC) is a fiber‐reinforced polymeric composite. It is often used in automotive, marine, and industrial applications over other materials because of its high strength to density ratio, resistance to corrosion, and low cost. There is a demand in the SMC industry to be able to characterize SMC processability. This is particularly true for heavy truck body panels, one of the fastest growing applications of SMC. Because of their large size and high strength requirement, the molding forces have a major influence in the molding cycle. Also because of the long flow paths involved, the ability of the paste to carry glass needs to be properly characterized when developing new SMC materials. In this article, we demonstrate the benefits of using spiral flow as a processability tester. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Principal axes and surface fitting methods for three-dimensional image registration

We evaluated the effect of the image acquisition parameters on the accuracy of the principal axes and surface-fitting techniques for three-dimensional image registration. Using two types of phantom objects, MR brain image and a mathematically defined ellipsoid, we simulated pairs of scans with known acquisition parameters, including longitudinal coverage, magnitude of mis-registration, number of sections and section thickness. Both methods are sensitive to the systematic deformation of contours. The principal axes method is also sensitive to incomplete scan coverage and to the x-axis and y-axis misangulation. Both methods are insensitive to the number of sections, section thickness and the number of points per section. Surface fitting performed well without user supervision. There is no need for routine inclusion of the scaling factors as search parameters. The results confirm the feasibility of three-dimensional multimodality registration of brain scans with accuracy 1-2 mm, with surface fitting being the method of choice.