Hydrologic regionalisation impacts on wet-weather control selection.

Continuous simulation is performed using the US Environmental Protection Agency (USEPA) Storm Water Management Model (SWMM) to evaluate regional differences around the United States in hydrologic and water quality performance of wet-weather controls. Controls are characterised as being limited by peak inflow rate (i.e. any device with little or no storage, such as screens, filters and some proprietary devices) or by storage capacity (e.g., ponds, tanks). For flow-limited devices, results are presented in the form of percentage of annual runoff volume captured (passing through the device) for a given inflow capacity. For storage-limited devices, results are presented in two forms: percentage of annual runoff volume captured as a function of unit basin size and drawdown (drain) time, and as a percentage of total suspended solids captured, for the same two variables. Regional differences are apparent, driven mainly by variations in rainfall patterns around the country.     

Low-thermal expansion polycrystalline tantalum tungstate ceramics

The synthesis of thermal-shock-resistant materials from the system Ta₂O₅WO₃ was investigated. Ta₂WO₈ had a very low unit-cell thermal expansion coefficient (+0.5 X 10^–6° C^–1). Ta₃₀W₂O₈₁ also had a relatively low coefficient (+4.0 X 10^–6 ° C^–1) and a thermal durability over 1600° C. The thermal expansion curves of these polycrystalline ceramics were lowered because of microcracks caused by the large thermal expansion anisotropy of the crystal axes and were accompanied by hysteresis loops. The densification of Ta₂WO₈ ceramic was promoted by the addition of some metal oxides, and the strong ceramic of Ta₃₀W₂O₈₁ was obtained by controlling grain growth.     

Microbial sensor for preliminary screening of mutagens utilizing a phage induction test

For the preliminary screening of mutagens, a novel microbial sensor system was developed utilizing a phage induction test. Escherichia coli lysogenic strain GY5027 and nonlysogenic strain GY5026 were used in this study. The number of living cells was determined by measuring the respiration of cells immobilized onto an oxygen electrode. The injection of a mutagen, such as AF-2 and MNNG, caused the phage induction in the lysogenic strain, resulting in the decreased respiration of only the lysogenic strain immobilized onto the oxygen electrode but not of nonlysogenic strain. The rate of current increase correlated well with the concentration of mutagens. The sensor responses to the antibiotics and bactericides were definitely different from those of mutagens. Therefore, utilization of this microbial sensor system makes possible the estimation of a substrate's mutagenicity.     

Optical properties of graphite-like carbon films

A model of the electronic structure of graphite-like carbon films, describing the semiconductor properties of this material, is presented. Spectra of optical constants of microcrystalline carbon films in the region λ = 0.4–8.0 μm were studied by the spectral ellipsometry and IR reflection methods. A number of distinctive features of the spectra, associated with both the appearance of C---C- and C---H_n-type bonds and direct energy gaps, were found. Analysis of the optical data using the proposed model makes possible a common interpretation of our results and literature data. Values of a parameter Θ, which is an averaged qualitative parameter of structural distortions within carbon microcrystallites as compared with crystalline graphite, are determined from comparison of theoretical results and experimental data.     

Strength of small-scale spherical shells formed from pressed glass elements

Institute of Strength Problems, Academy of Sciences of the Ukrainian SSR, Kiev. Sumy Branch, Khar'kov Polytechnic Institute. Translated from Problemy Prochnosti, No. 8, pp. 102–104, August, 1989.     

Dynamics of the nitrogen transformation in a shallow stream and possible interventions.

This paper presents the assessment of the efficiency of the main biological nitrogen transformation processes in a shallow well-oxygenated river and conditions under which they are active and stabilise. The process dynamics was studied with the help of mathematical modelling of 2 years on-line data series measured in a reach of the Toess River, Switzerland. The algal nitrogen uptake was very stable and unaffected by most but frequent flood events. Daylight photosynthetic nitrogen uptake stabilised at 6 mgN mstreambed(-2) h(-1) (15 degrees C), dark uptake on storage products at rates of 0.5-2.5 mgN mstreambed(-2) h(-1). Nitrogen uptake by heterotrophic bacteria in the hyporheic zone was relatively constant at a level of 1.5-3.5 mgN mstreambed(-2) h(-1). Streambed nitrification could establish only during periods with average an daily concentration of at least 0.3 g(NH4-N) m(-3) in river water for several weeks. The maximum nitrification rate was 35 mgN mstreambed(-2) h(-1) for 3 g(NH4-N) m(-3). The effects of reduced nitrification in the WWTP and of river banks shading on a sudden ammonium peak were simulated. A river reach endangered by ammonium spills should be kept open to sun to favour ammonium uptake by algae. In-stream nitrification reduces ammonium peaks efficiently but leads to toxic nitrite concentrations.     

Formation of layered structure on bismuth-borate glass surface

X-ray diffraction analysis shows that the transformation during heat treatment from amorphous to crystalline phases of bismuth-borate glass samples takes place in sequences. After a short heat treatment, 5 min at 550 °C, a layered structure with a preferred orientation of crystallites on the surface is observed. After a long heat treatment, 8 h at the same temperature, normal polycrystalline bulk samples are obtained.     

Review on the fracture processes in nanocrystalline materials

An overview of experimental study, computer simulations and theoretical models of fracture of nanocrystalline materials is presented. The key experimentally detected facts on ductile and brittle fracture processes are discussed. Special attention is paid to computer simulations and theoretical models of nucleation and growth of nanocracks and nanopores in deformed nanocrystalline materials. Also, we discuss mechanisms for fracture suppression in such materials showing good ductility or superplasticity.