Silicon-to-steel bonding using rapid thermal annealing

This paper presents the rapid, low-temperature bonding between silicon and steel using the rapid thermal annealing process. Three different thin-film adhesion layer systems including silver, gold, and nickel were utilized as the intermediate bonding material to assist the eutectic Pb/Sn bonding between silicon and steel. The bonding temperature was set at 220/spl deg/C for 20 s, with a 20-s ramp-up time. Five experiments were conducted to determine the strength of the bond, including static tensile and compressive four-point bend tests, axial extension tests, tensile bending fatigue tests, and corrosion resistance tests. The test results have shown that the gold adhesion layer is the most robust, demonstrating minimal creep during fatigue tests, no delamination during the tensile or compressive four-point bend tests, and acceptable strength during the axial extension tests. Additionally, all adhesion layers have withstood four months of submersion in various high-temperature solutions and lubricants without failure. Simulations of the axial stresses and strains that developed during the four-point bend and axial extension tests were performed and showed that the presence of the silicon die provides a local reinforcement of the bond as observed in the experimental tests.     

3-D MCM封装技术及其应用

介绍了超大规模集成电路（VLSI）用的3-D MCM封装技术的最新发展，重点介绍了3-D MCM封装垂直互连工艺，分析了3-D MCM封装技术的硅效率、复杂程度、热处理、互连密度、系统功率与速度等问题，并对3-D MCM封装的应用作了简要说明。     

Analysis and comparison of two-dimensional permanent-magnet arrays for planar motor

This paper investigates three kinds of permanent-magnet arrays used in planar motors with polarity centers distributed in the lattices of a matrix. The magnetic field of every kind of magnet array is analyzed by analytical methods. First, we give a Laplace equation of magnetic scalar potential and a series of boundary conditions. Then, we derive the analytical expressions of magnet field strength and magnet flux density in the air gap of each kind of magnet array by the method of separation of variables. Finally, we compare the three types of magnet arrays on the basis of the analytical solutions.     

Domain-Driven, Actionable Knowledge Discovery

Data mining increasingly faces complex challenges in the real-life world of business problems and needs. The gap between business expectations and R&D results in this area involves key aspects of the field, such as methodologies, targeted problems, pattern interestingness, and infrastructure support. Both researchers and practitioners are realizing the importance of domain knowledge to close this gap and develop actionable knowledge for real user needs.     

Perturbation realization, potentials, and sensitivity analysis ofMarkov processes

Two fundamental concepts and quantities, realization factors and performance potentials, are introduced for Markov processes. The relations among these two quantities and the group inverse of the infinitesimal generator are studied. It is shown that the sensitivity of the steady-state performance with respect to the change of the infinitesimal generator can be easily calculated by using either of these three quantities and that these quantities can be estimated by analyzing a single sample path of a Markov process. Based on these results, algorithms for estimating performance sensitivities on a single sample path of a Markov process can be proposed. The potentials in this paper are defined through realization factors and are shown to be the same as those defined by Poisson equations. The results provide a uniform framework of perturbation realization for infinitesimal perturbation analysis (IPA) and non-IPA approaches to the sensitivity analysis of steady-state performance; they also provide a theoretical background for the PA algorithms developed in recent years     

新型超微晶软磁合金FePCCuMoSi微观结构缺陷的正电子湮没研究

用正电子湮没方法研究了新型超微晶软磁合金的微观结构缺陷，样品选用的是在不同温度下退火的Ｆｅ８１Ｐ１２Ｃ３Ｃｕ１Ｍｏ０．５Ｓｉ２．５合金，结果表明，合金的微观结构构陷大小，密度随退火温度有规律地变化，这种现象可能与非晶的晶化过程有关。     

单层球面网壳地震反应特征分析

考虑不同矢跨比、荷载、跨度和支座刚度等多种因素的影响,对单层球面网壳在地震作用下的反应进行了较全面的研究,给出了其随各参数变化的规律,得出了在单层球面网壳抗震设计中起控制作用的是水平地震作用而不是竖向地震作用等有益的结论.此外本文还给出了由于阻尼比不同而需对引用现行抗震规范反应谱分析的网壳地震作用进行修正的建议.     

往复式压缩机管道的防振设计

分析了往复式压缩机管道产生振动的原因及影响因素,提出解决管道振动的方法及对策。