Prevalence and characterization of Salmonella enterica serovar Weltevreden from imported seafood

During 2001-2005, 210 Salmonella enterica strains were isolated from seafood samples imported into US. Strains of S. enterica serovar Weltevreden were the most predominantly found among the 64 different serovars isolated. A total of 37 Salmonella Weltevreden isolates were characterized by pulsed-field gel electrophoresis (PFGE), plasmid profiles and antibiotic susceptibility to assess genetic diversity. Our results showed a low frequency of antibiotic resistance; 35 of the 37 isolates were sensitive to ampicillin, tetracycline, chloramphenicol, gentamicin, sulfisoxazole, streptomycin and kanamycin. Only two isolates, from samples originating in the Philippines and India, showed resistance to ampicillin and tetracycline and to streptomycin, sulfisoxazole and tetracycline, respectively. Of the 37 isolates, two isolates did not carry any plasmid and 35 isolates harbored several small and mega-plasmids. These isolates were differentiated into 10 distinct types based on plasmid profiles. Four different PFGE clusters were obtained with a genetic similarity of 66-76%. Four groups of isolates (formed by two or three isolates each) showed 100% similarity in the PFGE profiles. One of these groups included strains isolated in Vietnam in 2003, 2004 and 2005 from fish and shrimp. The other groups included strains isolated in Vietnam, Indonesia and Thailand in 2000, 2004 and 2005 from snail, shrimp and fish. Our findings show genetic diversity and temporal persistence of S. enterica serovar Weltevreden in recently monitored seafood imports.     

Molecular weight distribution of polyphenylene sulfide by high temperature gel permeation chromatography

Poly(phenylene sulfide) (PPS) has been characterized using a novel high temperature gel permeation chromatograph (GPC). Samples were injected in slurry form at ambient temperature, and redissolved by an in-line precolumn heater at 250°C. A viscometer consisting of a capillary tube with inlet and outlet taps connected to a sensitive differential pressure transducer was used as sole detector, with deflections converted to concentration using the column calibration. Columns and viscometer were operated at 210°C. Universal calibration was carried out using intrinsic viscosity/molecular weight relations for polystyrene and PPS, determined by light scattering. Satisfactory operation was confirmed by agreement between intrinsic viscosity calculated from GPC with independently measured values, and comparisons with melt flow data. Samples of PPS tested were found to be of relatively narrow distribution, with M_w/M_n typically less than two.     

Effect of particle size on flow and mixing in a bladed granular mixer

A number of studies have modeled flow and mixing of granular materials using the discrete element method (DEM). In an attempt to reduce computational costs, many of these DEM studies model particles larger than the actual particle size without investigating the implications of this assumption. Using DEM, the influence of the modeled particle size on flow and mixing in a bladed granular mixer is studied. The predicted flow microdynamics, including mixing rates, are strongly dependent on the particle diameter. The effect of particle size on macroscopic advective flow also is significant, particularly for dilute flow regions. These results suggest that the influence of particle size needs to be taken into consideration when using larger particles in DEM mixing simulations. To guide scale‐up efforts, particle‐size‐based scaling relationships for several key flow measurements are presented. © 2014 American Institute of Chemical Engineers AIChE J, 61: 46–57, 2015     

Precursor gas chemistry determines the crystallinity of carbon nanotubes synthesized at low temperature

Despite significant progress in carbon nanotube (CNT) synthesis by thermal chemical vapor deposition (CVD), the factors determining the structure of the resulting carbon filaments and other graphitic nanocarbons are not well understood. Here, we demonstrate that gas chemistry influences the crystal structure of carbon filaments grown at low temperatures (500 °C). Using thermal CVD, we decoupled the thermal treatment of the gaseous precursors (C₂H₄/H₂/Ar) and the substrate-supported catalyst. Varying the preheating temperature of the feedstock gas, we observed a striking transition between amorphous carbon nanofibers (CNFs) and crystalline CNTs. These results were confirmed using both a hot-wall CVD system and a cold-wall CVD reactor. Analysis of the exhaust gases (by ex situ gas chromatography) showed increasing concentrations of specific volatile organic compounds (VOCs) and polycyclic aromatic hydrocarbons (PAHs) that correlated with the structural transition observed (characterized using high-resolution transmission electron microscopy). This suggests that the crystallinity of carbon filaments may be controlled by the presence of specific gas phase precursor molecules (e.g., VOCs and PAHs). Thus, direct delivery of these molecules in the CVD process may enable selective CNF or CNT formation at low substrate temperatures. The inherent scalability of this approach could impact many promising applications, especially in the electronics industry.     

Impact of rotifer grazing on population dynamics of green microalgae in high-rate ponds

In high-rate algal ponds, the grazing activity of rotifers such as Brachionus rubens or B. calyciflorus often leads to a replacement of Scenedesmus species by Micractinium pusillum. In contrast to many other green microalgae including Scenedesmus, Micractinium pusillum with fully developed spines (setae) cannot be eaten by Brachionus. Ecological conditions for population shifts between Scenedesmus and Micractinium are, therefore, interpreted as a response of the rotifers rather than being due to physiological properties of the algae. Another effect of rotifer grazing on the microbial flora of high-rate ponds is the development of large stable flocs consisting of bacteria and microalgae.     

High-frequency propagation on nonuniform multiconductor transmission lines in uniform media

The asymptotic form, for high frequencies, of the equations of propagation on a nonuniform N-conductor transmission line is considered. Under the assumption of perfect conditions in uniform, isotropic media, all N propagation velocities are the same, but the characteristic impedance matrix is allowed to vary with position along the line. Closed-form solutions are obtained for some cases of interest.     

A genetic technique for robotic trajectory planning

There are many multi-stage optimization problems that are not easily solved through any known direct method when the stages are coupled. For instance, the problem of planning a vehicle's control sequence to negotiate obstacles and reach a goal in minimum time is investigated. The vehicle has a known mass, and the controlling forces have finite limits. A genetic programming technique is developed that finds admissible control trajectories that tend to minimize the vehicle's transit time through the obstacle field. The immediate application is that of a space robot that must rapidly traverse around two or three dimensional structures via application of a rotating thruster or non-rotating on-off thrusters. (An air-bearing floor test-bed for such vehicles is located at the Marshal Space Flight Center in Huntsville, Alabama.) It appears that the developed method is applicable to a general set of optimization problems in which the cost function and the multi-dimensional multi-state system can be any non-linear functions that are continuous in the operating regions. Other applications include: the planning of optimal navigation pathways through a traversability graph, the planning of control input for underwater maneuvering vehicles which have complex control state-space relationships, the planning of control sequences for milling and manufacturing robots, the planning of control and trajectories for automated delivery vehicles, and the optimization of control for racing vehicles and athletic training in slalom sports.     

Stigma and barriers to care in soldiers postcombat.

The present study examined the effects of leadership and unit cohesion on mental health stigma and perceived barriers to care. A sample of 680 soldiers from combat support units were surveyed 3 months after their return from combat operations in Iraq. The survey included scales on psychological symptoms and perceptions of leader behaviors and unit cohesion, as well as items assessing stigma and barriers to care. The sample was used to test the independent and interactive effects of leadership and unit cohesion on soldiers’ perceptions of stigma and barriers to care. Analyses yielded significant interaction effects between leadership and cohesion in predicting stigma and barriers to care, while controlling for the effects of mental health symptoms. Soldiers who rated their leaders more highly and who reported higher unit cohesion also reported lower scores on both stigma and perceived barriers to care. Thus, positive leadership and unit cohesion can reduce perceptions of stigma and barriers to care, even after accounting for the relationship between mental health symptoms and these outcomes. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Multisensor data fusion for on-site materials tracking in construction

Automated materials tracking and locating on construction sites can significantly impact construction productivity. The ability to automatically detect the locations and multi-handling of thousands of items can improve the performance of material distribution, and ultimately improve project performance. Deploying a cost-effective, scalable, and easy to implement materials location sensing system in real world construction sites has very recently become technically and economically feasible. However, much opportunity still exists to improve accuracy, precision and robustness. In this study a data fusion model is used on an integrated solution for automated identification, location estimation, and dislocation detection of construction materials. The developed model is a modified functional data fusion model. Particular attention is focused on dislocation detection because it is closely coupled with location estimation, and because it can be used to detect multi-handling of materials. Multi-handling is a key indicator of inefficiency. This study has successfully addressed the challenges of fusing data from different simple sources of information within a very noisy and dynamic environment. The results indicate a potential for the proposed model to improve location estimation and movement detection as well as to automate multi-handling counts.     

Partial Transient Liquid-Phase Bonding, Part II: A Filtering Routine for Determining All Possible Interlayer Combinations

Partial transient liquid-phase (PTLP) bonding is currently an esoteric joining process with limited applications. However, it has preferable advantages compared with typical joining techniques and is the best joining technique for certain applications. Specifically, it can bond hard-to-join materials as well as dissimilar material types, and bonding is performed at comparatively low temperatures. Part of the difficulty in applying PTLP bonding is finding suitable interlayer combinations (ICs). A novel interlayer selection procedure has been developed to facilitate the identification of ICs that will create successful PTLP bonds and is explained in a companion article. An integral part of the selection procedure is a filtering routine that identifies all possible ICs for a given application. This routine utilizes a set of customizable parameters that are based on key characteristics of PTLP bonding. These parameters include important design considerations such as bonding temperature, target remelting temperature, bond solid type, and interlayer thicknesses. The output from this routine provides a detailed view of each candidate IC along with a broad view of the entire candidate set, greatly facilitating the selection of ideal ICs. This routine provides a new perspective on the PTLP bonding process. In addition, the use of this routine, by way of the accompanying selection procedure, will expand PTLP bonding as a viable joining process.