Inorganic–organic hybrid materials are attracting a strong scientific interest mainly for their outstanding inherent mechanical and thermal properties, which can be traced back to the intimate coupling of both inorganic and organic components. By carefully choosing the experimental parameters used for their synthesis, chemically and thermally stable acrylate-based hybrid material embedding the zirconium oxocluster Zr4O4(OMc)12, where OMcCH2C(CH3)C(O)O, can be deposited as UV-cured films on aluminium alloys.
In particular, the molar ratios between the oxocluster and the monomer, the polymerisation time, the amount of photo-initiator and the deposition conditions, by using an home-made spray-coating equipment, were optimised in order to obtain the best performing layers in terms of transparency and hardness to coat aluminium alloy (AA1050, AA6060 and AA2024) sheets. Furthermore, it was also evaluated whether the hybrid coatings behave as barrier to corrosion.
Several coated samples were prepared and characterised. Environmental scanning electronic microscopy (ESEM) and scratch test were used to investigate the morphology of the films and to evaluate their scratch resistance, respectively. Electrochemical impedance spectroscopy (EIS) was performed in order to evaluate if the coatings actually protect the metallic substrate from corrosion.
In order to measure shear storage modulus (G′) and loss modulus (G″) of the materials used for coatings, bulk samples were also obtained by UV-curing of the precursors solution. Dynamical mechanical thermal analysis (DMTA) was performed in shear mode on cured disks of both the hybrid materials and pristine polymer for comparison. The values of Tg were read off as the temperatures of peak of loss modulus. The length and mass of all the samples were measured before and after the DMTA analysis, so that the shrinkage of the materials in that temperature range was exactly evaluated. 相似文献
Calculations and detailed first principle and thermodynamic analyses have been performed to understand the formation mechanism of K2Ti6O13 nanowires (NWs) by a hydrothermal reaction between bulk Na2Ti3O7 crystals and a KOH solution. It is found that direct ion exchange between K+ and Na+ plus H+ interactions with [TiO6] octahedra in Na2Ti3O7 promote the formation of an intermediate H2K2Ti6O14 phase. The large lattice mismatch between this intermediate phase and the bulk Na2Ti3O7 structure, and the large energy reduction associated with the formation of this intermediate phase, drive the splitting of the bulk crystal into H2K2Ti6O14 NWs. However, these NWs are not stable because of large [TiO6] octahedra distortion and are subject to a dehydration process, which results in uniform K2Ti6O13 NWs with narrowly distributed diameters of around 10 nm. 相似文献
By applying a combination of characterisation tools, changes in structural and superconducting properties with nominal Mg non‐stoichiometry in MgxB2 are found. The non‐stoichiometry produces enhanced in‐field critical current densities (Jc's) and upper critical field / irreversibility field (Hc2/Hirr(T)) values. Upper critical fields of ~ 21 T (4.2 K) were obtained in nominal Mg‐deficient samples compared to ~ 17 T (4.2 K) for near‐stoichiometric samples. 相似文献