Fluid jet polishing of optical surfaces

We present a new finishing process that is capable of locally shaping and polishing optical surfaces of complex shapes. A fluid jet system is used to guide a premixed slurry at pressures less than 6 bars to the optical surface. We used a slurry comprising water and 10% #800 SiC abrasives (21.8 mum) to reduce the surface roughness of a BK7 sample from 350 to 25 nm rms and to vary the shape of a polished sample BK7, maintaining its surface roughness of 1.6 nm rms, thereby proving both the shaping and polishing possibilities of the presented method.     

Response of phase Doppler anemometer systems to nonspherical droplets

The Phase Doppler Anemometer (PDA) technique measures particle diameter assuming sphericity. A means for detecting nonsphericity has usually been implemented in commercial PDA systems to avoid sizing errors if the sphericity assumption is not valid. In the present research the response of standard and planar PDA systems is examined experimentally in more detail by passing nonspherical droplets of known shape through the measurement volume. The effectiveness of nonsphericity detection schemes can be evaluated, and furthermore the influence of the droplet oscillations on the frequency and phase evolution of individual signals can be quantified. The light scattering from such particles has been simulated by using geometric optics, and the computed response of standard and planar PDA systems agrees well with the experimental observations. We conclude with some remarks concerning the possibilities of characterizing the nonsphericity with PDA systems.     

Influence of the Glass-Transition Temperature and the Chromophore Content on the Grating Buildup Dynamics of poly(N-vinylcarbazole)-based Photorefractive Polymers

The influence of the glass-transition temperature T(g) and the electro-optical chromophore content on the grating buildup dynamics in photorefractive polymer composites is investigated. The response times were found to be strongly dependent on both parameters. In the low-T(g) regime, composites of different chromophore content respond similarly quickly (200-500 ms), whereas significant differences occur for T(g) above the measurement (room) temperature. The composites with the highest chromophore content give the best steady-state performance; however, their response is much slower than that for those containing less chromophore.     

Studies of 2D Cryocrystals by STM Techniques

Scanning tunneling microscopy (STM) studies of two-dimensional (2D) cryocrystals ⁴ He, Kr, Xe) physisorbed on graphite surfaces are presented. Individual helium atoms, usually thought to be invisible with STM, were recently observed on graphite surfaces at a density corresponding to the commensurate solid. Here we show that a local elastic deformation seems to be the principal mechanism responsible to render the atoms visible. Recent tight-binding calculations of the local density of states (LDOS) of graphite which predict the appearance of an energy gap support this picture. I-z curve measurements for the case of ⁴ He show a sharp drop (increase) of the tunneling current I at a certain tip-surface distance z during retraction (approach) of the tip. This drop (increase) may be associated with the tunneling of a single He adatom, opening new possibilities to study the quantum tunneling of atoms via STM.     

Development of a Solid Phase Carbon Trap for Simultaneous Determination of PCDDs, PCDFs, PCBs, and Pesticides in Environmental Samples Using SFE-LC

The purpose of this study was to find materials that can be used as a solid phase trap in a commercial supercritical fluid extraction instrument. PX-21 active carbon mixed with ODS proved to yield the best results. After SFE of the target compounds, the planar fraction containing the environmental pollutants PCDDs, PCDFs, and planar PCBs was successfully separated on a PX-21 solid phase trap from the nonplanar fraction containing the other PCBs and pesticides. Direct injection of the concentrated fractions on GC/MS was possible without further cleanup. SFE followed by on-line carbon column chromatography was tested using standard solutions (applied on filter paper) as well as biological samples (human adipose tissue).     

Reversible suppression of the so-called fishtail effect in ultra pure single crystals of YBa2Cu3O7−δ achieved by proper oxygenation

We report on the absence of the so-called fishtail or peak effect in the magnetisation curves of properly oxygenated high purity (5N) single crystals of YBa₂Cu₃O_7–. As we recently reported [1] high pressure oxygenation procedures are suitable to produce a monotonous dependence of the critical current density with the magnetic field. In this article we report furthermore how to reversibly produce or remove this effect on the same crystal by proper oxygenation methods. Along with the high purity of the samples, — due to crystal growth in non reactive BaZrO₃ crucibles —, this proves that at least in pure samples the fishtail effect is due to different oxygenation states and/or oxygen distributions. In less pure samples, however, other sources for this anomaly like metallic impurities can act as an additional source for the fishtail anomaly.     

Perpendicular-incidence photometric ellipsometry of biaxial anisotropic thin films

A new measurement technique for the characterization of uniaxial as well as biaxial anisotropic surfaces and thin films is introduced. This technique is based on perpendicular-incidence photometric ellipsometry, in which a spectral-photometric dynamic ellipsometer with a rotating polarizer is used. This method is sensitive, contactless, nondestructive, and efficient for the estimation of anisotropic behavior. Furthermore, the spectroscopic measurement directly provides the anisotropy dispersion down to the UV wavelength range. Results on structurally anisotropic HfO(2) coatings are presented.