Impact of the coating process on the molecular structure of starch‐based barrier coatings

Molecular analysis of starch structure can be used to explain and predict changes in physical properties, such as water vapor and oxygen barrier properties in packaging materials. Solution casting is a widely used technique to create films from starch formulations. This study compared the molecular properties of these standard films with those of experimental coatings applied to paper in laboratory‐scale and pilot‐scale trials, with all three techniques using the same starch formulation. The results revealed large differences in molecular structure, i.e., cross‐linking and hydrolysis, between films and coatings. The main differences were due to the shorter drying time allowed to laboratory‐scale coatings and the accelerated drying process in pilot trials owing to the high energy output of infrared dryers. Furthermore, surface morphology was highly affected by the coating technique used, with a rougher surface and many pinholes occurring in pilot‐scale coatings, giving lower water vapor permeability than laboratory‐scale coatings. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 41190.     

The effective hydrodynamic radius of single DNA-grafted colloids as measured by fast Brownian motion analysis

Optical tweezers accomplished with fast position detection enable one to carry out Brownian motion analysis of single DNA-grafted (grafting density: ∼1000 molecules per particle, molecular weight: 4000 bp) colloids in media of varying NaCl concentration. By that the effective hydrodynamic radius of the colloid under study is determined and found to be strongly dependent on the conformation of the grafted DNA chains. Our results compare well both with recent measurements of the pair interaction potential between DNA-grafted colloids (Kegler et al. Phys Rev Lett 2008; 100:118302) and with microfluidic studies (Gutsche et al. Microfluid Nanofluid 2006; 2:381-386). The observed scaling of the brush height with the ion concentration is in full accord with the theoretical predictions by Pincus, Zhulina, Birshtein and Borisov.     

Interactions of Fibroblasts with Different Morphologies Made of an Engineered Spider Silk Protein

Spider silk has been investigated for decades due to the intriguing mechanical and also biomedical properties of the silk fibers. Previously, it has been shown that recombinant silk proteins can also be processed into other morphologies. Here, we characterized scaffolds made of the recombinant spider silk protein eADF4(C16) concerning their surface interactions with fibroblasts. Studies of BALB/3T3 cells on hydrogels and films made of eADF4(C16) showed low cell adhesion without observable duplication. Electro‐spun non‐woven scaffolds made of eADF4(C16), however, enabled both their adhesion and proliferation. Since eADF4(C16) lacks specific motifs for cell attachment, fibroblasts cannot generate focal adhesions with the material's surface, and, therefore, other cell–interface interactions such as topographical anchorage or cell attachment mediated by adhesion of extracellular matrix proteins are discussed in this paper. On non‐woven meshes protrusion of filopodia and/or lamellipodia between individual fibers increase the surface contact area, which depends on the diameter of the fibers of the non‐woven meshes. In contrast, at flat (film) or microstructured surfaces (hydrogels) such interactions seem to be precluded.     

A high-performance, miniaturized X-band active mixer forDBS receiver application with on-chip IF noise filter

A GaAs monolithic microwave integrated circuit (MMIC) dual-gate FET active mixer at X-band is described that is designed for direct broadcast satellite (DBS) applications. All of the components of the mixer, including biasing circuitry, RF, LO, and IF matching networks, as well as the IF noise filter, are implemented monolithically into a 25-mil×30-mil area. The design was process tolerant, and layout was compact for manufacturability and low cost. The mixer was integrated monolithically into a complete single-chip DBS low-noise block (LNB) converter. The active mixer has a conversion gain of 5.5 dB and a single-sideband noise figure of 8.5 dB. The circuit is manufactured using a 0.5-μm gate length, buried p^- depletion mode MESFET process without substrate-through via holes     

Novel TTLL5 Variants Associated with Cone-Rod Dystrophy and Early-Onset Severe Retinal Dystrophy

Variants of the TTLL5 gene, which encodes tubulin tyrosine ligase-like family member five, are a rare cause of cone dystrophy (COD) or cone-rod dystrophy (CORD). To date, only a few TTLL5 patients have been clinically and genetically described. In this study, we report five patients harbouring biallelic variants of TTLL5. Four adult patients presented either COD or CORD with onset in the late teenage years. The youngest patient had a phenotype of early onset severe retinal dystrophy (EOSRD). Genetic analysis was performed by targeted next generation sequencing of gene panels and assessment of copy number variants (CNV). We identified eight variants, of which six were novel, including two large multiexon deletions in patients with COD or CORD, while the EOSRD patient harboured the novel homozygous p.(Trp640*) variant and three distinct USH2A variants, which might explain the observed rod involvement. Our study highlights the role of TTLL5 in COD/CORD and the importance of large deletions. These findings suggest that COD or CORD patients lacking variants in known genes may harbour CNVs to be discovered in TTLL5, previously undetected by classical sequencing methods. In addition, variable phenotypes in TTLL5-associated patients might be due to the presence of additional gene defects.     

Efficient Modular Synthesis of Isomeric Mono‐ and Bispyridyl[2.2]paracyclophanes by Palladium‐Catalyzed Cross‐ Coupling Reactions

Pyridyl‐substituted [2.2]paracyclophanes build a multifunctional structural motif that is useful in material chemistry, catalysis and for luminescent structures. Nonetheless, there is still a lack of general methods for the synthesis of these structures tolerating easily accessible bromides as well as different isomeric pyridyl groups. Hence the coupling of functionalized [2.2]paracyclophanes with various substituted and functionalized pyridyl derivatives was achieved using Stille, Suzuki and Kumada coupling conditions. Hereby the Stille coupling of a [2.2]paracyclophane is presented as a versatile reaction for the formation of heteromeric [2.2]paracyclophane‐containing biaryl structures.

     

Drag reduction by DNA-grafting for single microspheres in a dilute λ-DNA solution

The fluid resistance of single micrometre-sized blank and DNA-grafted polystyrene microspheres under shear flow is compared in purified water and dilute λ-DNA solutions by means of optical tweezers experiments with a high spatial (±4 nm) and temporal (±0.2 ms) resolution. The measurement results show that the drag experienced by a colloid in a dilute λ-DNA solution (molecular weight of 48,502 bp per molecule, radius of gyration of 0.5 μm) is significantly decreased if the microsphere bears a grafted DNA brush. This newly discovered drag reduction effect is studied for different parameters, comprising the molecular weight of the grafted DNA molecules (250 bp, 1000 bp and 4000 bp), the concentration of the λ-DNA solution (11, 17 and 23 μg ml^?1, all being significantly smaller than the critical entanglement concentration c¹), the microsphere core diameter (2 μm, 3 μm and 6 μm) as well as the flow speed of the medium (10–50 μm s^?1). The maximum extent of the drag reduction is found to amount to (60 ± 20)% compared to the λ-DNA-induced contribution on the drag acting on blank colloids. We propose a theoretical explanation of this effect based on the combination of the dynamic density functional theory of Rauscher and co-workers [Rauscher M. J. Phys.: Condens. Matter 2010;22:364109] and the stagnation length theory of polymer brushes, as it was established by Kim, Lobaskin et al. [Kim et al. Macromolecules 2008;42(10):3650–3655]. In particular, the solution of the Stokes equation (i.e., the Navier–Stokes equation for creeping flow) for the studied system yields a numerical prediction that is found to be in full accord with our experimental results within measurement uncertainty.     

Gender differences in self-esteem: A meta-analysis.

Two analyses were conducted to examine gender differences in global self-esteem. In Analysis I, a computerized literature search yielded 216 effect sizes, representing the testing of 97,121 respondents. The overall effect size was 0.21, a small difference favoring males. A significant quadratic effect of age indicated that the largest effect emerged in late adolescence (d?=?0.33). In Analysis II, gender differences were examined using 3 large, nationally representative data sets from the National Center for Education Statistics (NCES). All of the NCES effect sizes, which collectively summarize the responses of approximately 48,000 young Americans, indicated higher male self-esteem (ds ranged from 0.04 to 0.24). Taken together, the 2 analyses provide evidence that males score higher on standard measures of global self-esteem than females, but the difference is small. Potential reasons for the small yet consistent effect size are discussed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)