Specific consumption of liquid biofuels in gasoline fuelled engines

Oxygenated fuels increase fuel consumption due to their low enthalpy of combustion; however, their high antiknock index renders them suitable for use in engines with a high compression rate, increasing their thermal yield. This study evaluated the performance of biorenewable oxygenated fuels (ethanol and isoamyl alcohol) and partially renewable fuels (ETBE: ethyl tert-butyl ether, TAEE: tert-amyl ethyl ether and di-TAE: di-tert-amyl ether) with high degree of purity and in mixtures with automotive gasoline, based on tests with Otto cycle engines. Among the oxygenated fuels evaluated here, di-TAE was found to present the best characteristics of performance, both individually and in mixtures with gasoline.     

Nonisothermal melt-crystallization kinetics of isotactic polypropylene synthesized with a metallocene catalyst and compounded with different quantities of an α nucleator

The nonisothermal crystallization kinetics of a metallocene-made isotactic polypropylene (m-iPP) and its compounds with 0.1 wt % and 0.3 wt % of a sorbitol derivative [1,3:2,4-bis(3,4-dimethylbenzylidene)sorbitol (DMDBS); an α nucleator] were investigated by differential scanning calorimetry at different cooling rates from the melt. The nucleation efficiency was proved by a significant increase in the crystallization temperatures (accompanied by a slight augmentation of the degree of crystallinity and a decrease in the crystal sizes). This increase in the crystallization temperatures led to higher amounts of fractional content in the γ polymorph, even though DMDBS was supposed to be a nucleator for the α form. The Avrami and Ozawa methods effectively described only the early stage of crystallization, whereas a combined Avrami–Ozawa method was valid for the whole crystallization process. The values of the exponent for this method decreased for nucleated samples in the later stage of crystallization, especially in the case of m-iPP with 0.3 wt % DMDBS added (m-iPP03). The activation energy of the process and the surface free energy were also estimated. The production of considerable proportions of the γ polymorph in m-iPP03 corresponded to higher values of the activation energy and lower values of the surface free energy. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Faculty and Student Attitudes Toward Community Service: A Comparative Analysis

The Humanitarian Engineering initiative, sponsored by the William and Flora Hewlett Foundation, at the Colorado School of Mines, is creating a program that will support engineering students in understanding their responsibility for solving community development problems that exist throughout the world. As part of this effort, data has been collected on faculty and student attitudes using the ‘Community Service Attitudes Scale,” developed and validated by Shiarella, McCarthy, and Tucker. During the fall 2004, 78 students and 34 faculty members responded to this instrument. Statistically significant differences were found between the attitudes of students and faculty, males and females, and among different age groupings with respect to service activities. A general finding was that faculty displayed better attitudes toward community service than the students.     

Nodally exact Ritz discretizations of 1D diffusion–absorption and Helmholtz equations by variational FIC and modified equation methods

This article presents the first application of the Finite Calculus (FIC) in a Ritz-FEM variational framework. FIC provides a steplength parametrization of mesh dimensions, which is used to modify the shape functions. This approach is applied to the FEM discretization of the steady-state, one-dimensional, diffusion–absorption and Helmholtz equations. Parametrized linear shape functions are directly inserted into a FIC functional. The resulting Ritz-FIC equations are symmetric and carry a element-level free parameter coming from the function modification process. Both constant- and variable-coefficient cases are studied. It is shown that the parameter can be used to produce nodally exact solutions for the constant coefficient case. The optimal value is found by matching the finite-order modified differential equation (FOMoDE) of the Ritz-FIC equations with the original field equation. The inclusion of the Ritz-FIC models in the context of templates is examined. This inclusion shows that there is an infinite number of nodally exact models for the constant coefficient case. The ingredients of these methods (FIC, Ritz, MoDE and templates) can be extended to multiple dimensions     

A new amperometric biosensor for fructose determination based on epoxy-graphite-TTF-TCNQ-FDH-biocomposite

In this work a novel amperometric biosensor for fructose determination in solutions was developed. The device was constructed by the incorporation of a tetrathiofulvalene-tetracyanoquinodimethane organic conducting salt and fructose dehydrogenase enzyme, include in a polymeric matrix of epoxy resin and graphite powder. Because of the electrocatalytic function of the salt, the direct transfer of the electron between the reduced prosthetic group (PQQH₂) of the enzyme and the transducing material, was verified at a low working potential (150 mV vs. Ag/AgCl), where the interfering reactions were minimized. The response time at 90% of the steady state value was less than 20 s. The current response was directly proportional to the D-fructose concentration from 0.01 to 0.3 mmol/l with a detection limit of 0.005 mmol/l (signal/noise of 3) and a sensitivity of 1.9985 μA/mmol. The biosensor sensitivity diminishes when its surface is not polished between successive determinations, and remains constant (rsd=1.85, n=10) when the surface is polished between determinations. The effects of temperature and pH on the biosensor response were studied and analyzed; also the properties of the enzyme (Km _ap, I _max, Q₁₀) were determinate in this work. The biosensor was used to determine fructose in high fructose syrups and there were not significant differences between these results and those obtained by HPLC (p≤0.05). During 4 months, in intermittent determinations the biosensor kept 100% of its original sensitivity and after 18 months stored at 4°C, it only lost 32% of its sensitivity. The simplicity, low working potential, high stability and good performance of this biosensor shows a great potential for its use in the fructose determination.     

Min-Max MPC based on a computationally efficient upper bound of the worst case cost

Min-Max MPC (MMMPC) controllers [P.J. Campo, M. Morari, Robust model predictive control, in: Proc. American Control Conference, June 10–12, 1987, pp. 1021–1026] suffer from a great computational burden which limits their applicability in the industry. Sometimes upper bounds of the worst possible case of a performance index have been used to reduce the computational burden. This paper proposes a computationally efficient MMMPC control strategy in which the worst case cost is approximated by an upper bound based on a diagonalization scheme. The upper bound can be computed with O(n³) operations and using only simple matrix operations. This implies that the algorithm can be coded easily even in non-mathematical oriented programming languages such as those found in industrial embedded control hardware. A simulation example is given in the paper.     

Retinoblastoma: clinical and molecular diagnostic aspects

Retinoblastoma, a tumor of the immature retina concerns babies and young infants in particular. They make up for 14% of malignomas in the first years of life. There are two types of retinoblastoma: In the first two alleles of the gene Rb1 must be inactivated sequentially in the same retinoblast cell until this may escape control. In this case the retinoblastoma is always unilateral and unifocal. This is explained by the lower frequency of two mutations in one retinoblast. The other type, however, is inherited: One allele Rb1 is inactivated in all cells of the organism by mutation. The probability that a second mutation arrives in different retinoblasts is thus high. In this case bilateral multifocal tumors develop. Characterization of the Rb1 gene has permitted identification or at least determination of a haplotype in persons at risk. This knowledge is decisive for early recognition of babies at risk and for genetic counselling.     

FR139317, a specific ETA-receptor antagonist, inhibits cerebral activation by intraventricular endothelin-1 in conscious rats

A comprehensive series of time-related behavioral, physiological and cerebral metabolic studies was conducted using conscious Sprague-Dawley rats to discern the anti-endothelin (ET) properties of the specific ETA receptor antagonist, FR139317. Endothelin-1 (9 pmol given by injection into one lateral ventricle, i.c.v.) produced convulsions, acute arterial hypertension, arterial hyperglycemia, and hyperventilation. Brain structures close to the i.c.v. site of injection, such as the caudate nucleus, lateral septal nucleus, corpus callosum and hippocampal CA3 medial lamellae, as well as 14 other individual structures, displayed moderate-to-intense levels of metabolic activation after endothelin. Data were assessed quantitatively by means of the autoradiographic [14C]deoxyglucose technique combined with image analysis. Neural circuits in the efferent projection paths of the stimulated forebrain structures, such as the midbrain oculomotor complex, amygdaloid nuclei, substantia nigra pars reticulata and caudal subicular subregions of the hippocampal formation, were stimulated focally by endothelin. Specific medullary nuclei and cerebellar cortical subregions displayed high rates of glucose metabolism following endothelin injection at the time of maximum behavioral and physiological stimulation. I.c.v. treatment with > or = 14 nmol FR139317 before endothelin significantly inhibited the effects produced by the peptide. At the highest dose of FR139317 (28 nmol), there was only mild behavioral stimulation following endothelin injection, and hypermetabolic responses in the brain were abolished except in two specific areas of the cerebellar cortex (approx 40% increases in metabolic activity in the copula pyramis and paramedian lobule). The results indicate that the cerebral stimulatory effects of i.c.v. endothelin are mediated by the A type of endothelin receptor. By itself, i.c.v. FR139317 had no effects on the parameters assessed. Further evaluation of FR139317 is warranted as a possible therapeutic agent for neuropathologies suspected of deriving from central neural or vascular stimulation by endothelin, such as aneurysmal vasospasm, ischemia, excitotoxicity, and peptide-mediated epilepsies.