Poly (hydroxyethyl methacrylate-glycidyl methacrylate) films modified with different functional groups: In vitro interactions with platelets and rat stem cells

Copolymerization of 2-hydroxyethylmethacrylate (HEMA) with glycidylmethacrylate (GMA) in the presence of α-α′-azoisobisbutyronitrile (AIBN) resulted in the formation of hydrogel films carrying reactive epoxy groups. Thirteen kinds of different molecules with pendant NH₂ group were used for modifications of the p(HEMA-GMA) films. The NH₂ group served as anchor binding site for immobilization of functional groups on the hydrogel film via direct epoxy ring opening reaction. The modified hydrogel films were characterized by FTIR, and contact angle studies. In addition, mechanical properties of the hydrogel films were studied, and modified hydrogel films showed improved mechanical properties compared with the non-modified film, but they are less elastic than the non-modified film. The biological activities of these films such as platelet adhesion, red blood cells hemolysis, and swelling behavior were studied. The effect of modified hydrogel films, including NH₂, (using different aliphatic CH₂ chain lengths) CH₃, SO₃H, aromatic groups with substituted OH and COOH groups, and amino acids were also investigated on the adhesion, morphology and survival of rat mesenchymal stem cells (MSCs). The MTT colorimetric assay reveals that the p(HEMA-GMA)-GA-AB, p(HEMA-GMA)-GA-Phe, p(HEMA-GMA)-GA-Trp, p(HEMA-GMA)-GA-Glu formulations have an excellent biocompatibility to promote the cell adhesion and growth. We anticipate that the fabricated p(HEMA-GMA) based hydrogel films with controllable surface chemistry and good stable swelling ratio may find extensive applications in future development of tissue engineering scaffold materials, and in various biotechnological areas.     

Synthesis of ZnO: Ge nanocomposite thin films by plasma gas condensation

In this work, we introduce a new method for the synthesis of Ge nanoparticles embedded ZnO thin films that are considered to be a potential candidate for photovoltaic applications. As opposed to current techniques, for the independent preparation of Ge nanoparticles, we propose using Cluster Deposition Source (CDS), which utilizes gas condensation of sputtered Ge atoms. For the synthesis of ZnO thin film host material conventional sputtering technique is employed. In the proposed technique independently synthesized Ge nanoparticles and ZnO thin films are combined into a composite structure on (100) oriented Si substrates. X-ray diffraction (XRD) patterns of the samples have revealed that Ge nanoparticles preferentially settle on (113) planes on top of the (002) oriented ZnO layer. It is realized that Ge nanoparticles with sizes ranging from 16 nm to 20 nm could be embedded into a well-defined ZnO matrix. In fact, transmission electron microscopy (TEM) studies performed on Ge nanoparticles captured on a Cu grids placed just above the substrate during deposition for about 60 s have manifested that Ge nanoparticles reach to ZnO matrix as clusters composed of particles with sizes of about 7–8 nm and then eventually grow larger due to substrate heating implemented during capping layer deposition. Optical absorption measurements have revealed that Ge nanoparticle inclusion lead to an additional absorption edge at about 2.75 eV along with 3.17 eV edge resulting from ZnO host.     

Influence of residual elements in lead on oxygen- and hydrogen-gassing rates of lead-acid batteries

Raw lead materials contain many residual elements. With respect to setting ‘safe’ levels for these elements, each country has its own standard, but the majority of the present specifications for the lead used to prepare battery oxide apply to flooded batteries that employ antimonial grids. In these batteries, the antimony in the positive and negative grids dominates gassing characteristics so that the influence of residual elements is of little importance. This is, however, not the case for valve-regulated lead-acid (VRLA) batteries, which use antimony-free grids and less sulfuric acid solution. Thus, it is necessary to specify ‘acceptable’ levels of residual elements for the production of VRLA batteries. In this study, 17 elements are examined, namely: antimony, arsenic, bismuth, cadmium, chromium, cobalt, copper, germanium, iron, manganese, nickel, selenium, silver, tellurium, thallium, tin, and zinc. The following strategy has been formulated to determine the acceptable levels: (i) selection of a control oxide; (ii) determination of critical float, hydrogen and oxygen currents; (iii) establishment of a screening plan for the elements; (iv) development of a statistical method for analysis of the experimental results. The critical values of the float, hydrogen and oxygen currents are calculated from a field survey of battery failure data. The values serve as a base-line for comparison with the corresponding measured currents from cells using positive and negative plates produced either from the control oxide or from oxide doped with different levels of the 17 elements in combination. The latter levels are determined by means of a screening plan which is based on the Plackett-Burman experimental design. Following this systematic and thorough exercise, two specifications are proposed for the purity of the lead to be used in oxide production for VRLA technology.     

Effect of Microstructure on Exhaust Manifold Cracks Produced From SiMo Ductile Iron

Ductile cast irons are used as high temperature materials in internal combustion engines,because they are microstructurally stable at high operating temperatures.SiMo granular graphite cast irons contain Fe2 MoC and M6C carbide precipitates due to their higher concentration of both silicon and molybdenum.The microstructure of these cast irons consists of carbides dispersed within the ferrite matrix.The microstructural change and the crack formation mechanism in manifolds produced from SiMo ductile iron are studied.Chemical analysis,optical and scanning electron microscope studies have been completed and evaluated.     

Entropy generation analysis in a monolithic-type solid oxide fuel cell (SOFC)

The aim of the paper is to investigate possible improvements in the geometry design of a monolithic solid oxide fuel cells (SOFCs) through analysis of the entropy generation terms. The different contributions to the local rate of entropy generation are calculated using a computational fluid dynamic (CFD) model of the fuel cell, accounting for energy transfer, fluid dynamics, current transfer, chemical reactions and electrochemistry. The fuel cell geometry is then modified to reduce the main sources of irreversibility and increase its efficiency.     

Lifetime optimization of a molten carbonate fuel cell power system coupled with hydrogen production

In this paper, a biogas fuelled energy system for combined production of electricity and hydrogen is considered. The system is based on a molten carbonate fuel cell stack integrated with a micro gas turbine. Hydrogen is produced by a pressure swing absorption system. A multi-objective optimization is performed, considering the electrical efficiency and the unit cost of electricity as the objective functions.The system operation is affected by variations in fuel composition, ambient temperature and performance degradation of the components occurring during its lifetime. These effects are considered while defining the objective functions.     

Cadmium and lead contamination in vegetables collected from industrial, traffic and rural areas in Bursa Province, Turkey

Cadmium and lead contamination of vegetables produced in rural areas of Bursa Province, Turkey, was found to be less contaminated than vegetables grown close to heavy traffic and industrial activities. The highest levels of cadmium and lead were found in lettuce; the lowest levels in vegetables were found in leeks. The lead levels in spinach grown in traffic areas were at least twofold higher than those found in industrial areas. For other vegetables, the results from industrial and traffic areas were almost identical. Lettuce grown in traffic areas had the highest amount of cadmium (0.81 +/- 0.25 mg kg(-1)) and lead (1.59 +/- 0.45 mg kg(-1)), whilst leeks grown in rural areas had the lowest levels of lead (0.10 +/- 0.03 mg kg(-1)) and cadmium (0.05 +/- 0.01 mg kg(-1)) compared with other vegetables. This study shows that people and animals living in the same area in Bursa are always exposed to metallic pollution and in turn the consumption of contaminated vegetables could lead to increased dietary intake.     

Polymer Film Supported Bimetallic Au–Ag Catalysts for Electrocatalytic Oxidation of Ammonia Borane in Alkaline Media

Nano-Micro Letters - Ammonia borane is widely used in most areas including fuel cell applications. The present paper describes electrochemical behavior of ammonia borane in alkaline media on the...