Post-processor development for a turning and milling composite machine tool

The accomplishment of a turning and five-axis milling in only one setup is extremely useful and is possible on a turning and milling composite machine tool. In this work, we present a control algorithm and develop a post-processor for this machine, which has six linear and three rotary axes. To calculate a generalized kinematics model, coordinate systems are established by analyzing the basic kinematic chain relation of the turning and milling composite machine tool. The two vectors, which control the motions of the cutter contact workpiece, are simultaneously transformed to provide the algorithms of the rotary angles and motion coordinate. A special post-processor written in JAVA language is developed according to the proposed algorithm. To evaluate the effectiveness and accuracy of the developed post-processor, a specimen (blade) is used in the cutting simulation and real machining experiment. Experimental results showed the effectiveness and accuracy of the proposed algorithm. Furthermore, Compatibility is improved by adding new functions such as change of target machine, cutter location data change, workpiece origin offset, and cutting feed rate control.     

Use of FIB to Study ZDDP Tribofilms

Focussed ion beam milling (FIB) followed by TEM has been used to study ZDDP tribofilms on rubbed steel surfaces. It has been found that the impact of high energy platinum and gallium ions during FIB causes significant morphological and structural changes to the uppermost 30–50 nm of a ZDDP tribofilm. This can be prevented by the low energy deposition of a quite thick gold layer prior to installation of the sample in the FIB facility. This problem, and its solution, have been quite widely reported in the non-tribology literature but have not previously been highlighted in the application of FIB to study tribological surfaces. It has also been found, using this gold pre-deposition method, that the bulk of the ZDDP tribofilm studied has a polycrystalline structure.     

Tribological Characteristics of Aqueous Graphene Oxide,Graphitic Carbon Nitride,and Their Mixed Suspensions

The tribological performance of graphene oxide (GO), graphitic carbon nitride (g-C₃N₄), and their mixed (g-C₃N₄/GO) aqueous suspensions was investigated. The 0.06 wt% GO, 0.06 wt% g-C₃N₄, and 0.06 wt% 1:1 g-C₃N₄/GO suspensions reduced the coefficient of friction (COF) by 37, 26 and 37% and wear mark radius by 19.1, 16.0 and 19.6%, respectively, in comparison with water. Pure g-C₃N₄ and GO suspensions showed unstable lubrication in the tests with relatively high loads and speeds, while the g-C₃N₄/GO mixed suspension had superior tribological performance in all tested conditions. This is because in the mixed suspension g-C₃N₄ agglomerates became smaller, and GO nanosheets exhibited fewer wrinkles and less stacking, which enabled the formation of a layer of tribo-composite film. As a result, the friction, wear and tribo-corrosion were reduced during sliding.     

Lyapunov exponent of friction-induced vibration under smooth friction curve

This paper studies the nonlinear behavior of the friction-induced vibration by using spring-mass model subject to the smooth frictionvelocity curve. The nonlinearity and instability of the friction may produce the chaotic vibration depending on the friction curve. In order to show this, the Lyapunov exponents are calculated for a variety of the slope and magnitude in the smooth friction curve. In turn, the dependency of the friction curve on the chaotic attractor is illustrated.     

Experimental study on the life prediction of servo motors through model-based system degradation assessment and accelerated degradation testing

The advent of smart factories has resulted in the frequent utilization of industrial robots within factories to increase production automation and efficiency. Due to the increase in the number of industrial robots, it has become more important to prevent any unexpected breakdowns of the factory. As a result, the lifespan prediction of machinery has become a crucial factor because such failures can be directly associated with factory productivity resulting in significant losses. Most of the failures occur within one of the core components of the robot arm, the servo motor, and thus we will focus on the analysis of the servo motor in this study. However, sensor attachment to such equipment is considered difficult due to the dynamic movement of the robot arm, meaning that internal instrumentation should be utilized during analysis. In addition, no definite measure to determine the degradation of the motor exists, and thus a new degradation index is proposed in this study. Therefore, in this study, the lifespan of the servo motor will be estimated through accelerated degradation testing methods based on a new system degradation assessment method, which estimates the fault of the system using observer-based residuals with encoder data obtained from internal instrumentation.     

A study on piezoelectric energy harvester using kinetic energy of ocean

Electricity generation through fossil fuels has caused environmental pollution. Accordingly, research on new renewable energy (solar, wind, geothermal heat, etc.) to replace fossil fuels and solve this problem is in progress. These devices can consistently generate power. However, they have several drawbacks, such as high installation costs and limitations in possible set-up environments. Therefore, the piezoelectric harvesting technology, which is able to overcome the limitations of existing energy technologies, is actively being studied. The piezoelectric harvesting technology uses the piezoelectric effect, which occurs in crystals that generate voltage when stress is applied. Its advantages include a wider installation base and a lower technological cost. This study investigated a piezoelectric energy-harvesting device based on constant wave motion. This device can harvest power in a constant turbulent flow in the middle of the sea. The components of the device are circuitry, percussion bar, triple layer piezoelectric bender, bearing and rudder. A multiphysical analysis coupled with the structure and piezoelectric elements was also conducted to estimate the device performance. The analysis accuracy was improved by applying the impact energy to the bender calculated based on the shape of the wave in the East Sea. The proposed device’s performance was finally confirmed by experiments.     

Structural and ion transport properties of [(AgI)x(AgBr)0.4−x](LiPO3)0.6 and (AgBr)x(LiPO3)(1−x) solid electrolytes

The (AgBr)_x(LiPO₃)_(1−x) (x=0.4 and 0.5) and [(AgI)_x(AgBr)_0.4−x](LiPO₃)_0.6 (x=0.1, 0.2, and 0.3) superionic electrolytes have been prepared by conventional melt quenching using a twin roller. These electrolytes are characterized by X-ray diffraction, SEM, and energy dispersive X-ray analysis (EDAX) for structural investigation. Electrical characterizations have been carried out by the AC impedance analysis. The conductivity of LiPO₃ glassy system at room temperature is improved by doping with the silver bromide (AgBr)_x(LiPO₃)_(1−x) and the mixture of silver iodide, silver bromide (AgI-AgBr-LiPO₃ system) up to 10⁻⁵ and 10⁻³ Ω⁻¹ cm⁻¹, respectively (improvements by four or five orders of magnitude). The frequency response of ionic conductivity has been analyzed by universal dynamic response model (Jonscher's law) and AC conductivity data are fitted using the Jonscher's power law. The conductivity values obtained by the power law and impedance plots are comparable. The frequency exponent (n) has a value between 0 and 1. The AgI-AgBr-LiPO₃ system shows the mixed alkali effect. Summerfield scaling master curve is temperature dependent, which may be due to the contribution of the both lithium and silver ions to ionic conduction.     

Preface

Evolutionary Algorithms(EAs)mimicking the principles of natural evolution can be used as powerful search and optimization methods.These Evolutionary Optimization methods are superior to traditional optimization methods especially in situations where gradient information is not readily available.EAs are generic and robust optimization methods since they do not make any assumption about the underlying search space.This is clearly evident by the success of EAs in a diverse range of real-world applications.T...     

Development of Anti-LRRC15 Small Fragments for Imaging Purposes Using a Phage-Display ScFv Approach

The human leucine-rich repeat-containing protein 15 (LRRC15) is a membrane protein identified as a marker of CAF (cancer-associated fibroblast) cells whose overexpression is positively correlated with cancer grade and outcome. Nuclear molecular imaging (i.e., SPECT and PET) to track LRRC15 expression could be very useful in guiding further therapeutic strategies. In this study, we developed an ScFv mouse phage-display library to obtain small fragment antibodies against human LRRC15 for molecular imaging purposes. Mice were immunized with recombinant human LRRC15 (hLRRC15), and lymph node cells were harvested for ScFv (single-chain variable fragment) phage-display analysis. The built library was used for panning on cell lines with constitutive or induced expression after transfection. The choice of best candidates was performed by screening various other cell lines, using flow cytometry. The selected candidates were reformatted into Cys-ScFv or Cys-diabody by addition of cysteine, and cloned in mammalian expression vectors to obtain batches of small fragments that were further used in site-specific radiolabeling tests. The obtained library was 1.2 × 10⁷ cfu/µg with an insertion rate >95%. The two panning rounds performed on cells permittedenrichment of 2 × 10⁻³. Screening with flow cytometry allowed us to identify 28 specific hLRRC15 candidates. Among these, two also recognized murine LRCC15 and were reformatted into Cys-ScFv and Cys-diabody. They were expressed transiently in a mammalian system to obtain 1.0 to 4.5 mg of Cys fragments ready for bioconjugation and radiolabeling. Thus, in this paper, we demonstrate the relevance of the phage-display ScFv library approach for the fast-track development of small antibodies for imaging and/or immunotherapy purposes.     

Silver-Decorated Silicon Nanostructures: Fabrication and Characterization of Nanoscale Terraces as an Efficient SERS-Active Substrate

Rich and highly dense surface-enhanced Raman (SERS) hotspots available in the SERS-active platform are highly anticipated in SERS measurements. In this work, conventional silicon wafer was treated to have wide exposure to terraces available within the silicon nanostructures (Si-NSs). High-resolution field emission scanning electron microscopic (FESEM) investigations confirmed that the terraces were several microns wide and spread over different steps. These terraces were further decorated with silver nanoparticles (Ag-NPs) of different shapes and sizes to achieve SERS-active hotspots. Based on more than 150 events, a histogram of the size distribution of Ag-NPs indicated a relatively narrow size distribution, 29.64 ± 4.66 nm. The coverage density was estimated to be ~4 × 10¹⁰ cm⁻². The SERS-activity of Ag-NPs -decorated Si-NSs was found to be enhanced with reference to those obtained in pristine Si-NSs. Finite difference time domain models were developed to support experimental observations in view of electromagnetic (EM) near-field distributions. Three archetype models; (i) dimer of same constituent Ag-NPs, (ii) dimer of different constituent Ag-NPs, and (iii) linear trimer of different constituent Ag-NPs were developed. EM near-field distributions were extracted at different incident polarizations. Si-NSs are well-known to facilitate light confinement, and such confinement can be cascaded within different Ag-NPs-decorated terraces of Si-NSs.