Rheological behavior of neat and carbon fiber-reinforced poly(ether ketone ketone) for extrusion deposition additive manufacturing

To develop new materials for extrusion additive manufacturing (AM) systems, a fundamental understanding of rheological properties is essential to correlate the effect of processing on material structure and its properties. In this work, the rheological properties of five different grades of neat and carbon fiber (CF)-reinforced poly(ether ketone ketone) are reported. Rheological properties are essential to understand the effect of reinforcing fibers and AM process parameters such as time, temperature, environment, and shear rate on flow behavior during processing. Small-amplitude oscillatory shear tests and steady shear tests indicated neat grades to exhibit less increase in viscosity over time when processed in air than the CF-filled grades. The filled grades showed greater shear thinning and lower sensitivity to temperature. Overall, this rheological analysis provides a broad framework for determining appropriate processing conditions for extrusion deposition AM of such high-temperature polymer systems.     

A methodology for predicting and comparing the full‐scale fire performance of similar materials based on small‐scale testing

Reconstructive fire testing is an important tool used by fire investigators to determine the cause, origin, and progression of a particular fire. Accurate reconstruction of the fire requires the laboratory structure to be outfitted with materials that, in terms of contribution to fire growth, perform similarly to the original materials found at the fire scene. Therefore, a procedure was developed to enable fire investigators to select these replacement materials on the basis of a quantitative assessment of their relative fire performance. This procedure consists of gram‐scale and/or milligram‐scale standard testing accompanied by inverse numerical modeling of these tests, which is used to obtain relevant material properties. A numerical model composed of a detailed pyrolysis submodel and empirical flame heat feedback submodels, which were developed in this study, is subsequently employed to simulate the early stages of the Room Corner Test, which was selected to represent full‐scale material performance. The results of these simulations demonstrate that this procedure can successfully differentiate between fire growth propensities of several commercially available medium density fiberboards.     

Phase field crystal model of solute drag

The atomic scale interaction of solute with a migrating grain boundary has been studied using a binary phase field crystal (PFC) model. This model bridges between atomistic and continuum simulation techniques as it operates on diffusive timescales but at atomistic length scales. For this study, a two-dimensional channel containing two grains separated by a flat grain boundary has been constructed that allows for a channel length on the order of one micrometer. A new formalism has been developed to allow for the application of an external driving pressure for the growth of one grain. These simulations account for solute/grain boundary interactions, resulting in a solute drag effect on the grain boundary motion. The PFC simulations show good agreement with classical solute drag theory, though deviations due to the atomic scale nature of the interface exist.     

ISSN exercise & sport nutrition review: research & recommendations

Sports nutrition is a constantly evolving field with hundreds of research papers published annually. For this reason, keeping up to date with the literature is often difficult. This paper is a five year update of the sports nutrition review article published as the lead paper to launch the JISSN in 2004 and presents a well-referenced overview of the current state of the science related to how to optimize training and athletic performance through nutrition. More specifically, this paper provides an overview of: 1.) The definitional category of ergogenic aids and dietary supplements; 2.) How dietary supplements are legally regulated; 3.) How to evaluate the scientific merit of nutritional supplements; 4.) General nutritional strategies to optimize performance and enhance recovery; and, 5.) An overview of our current understanding of the ergogenic value of nutrition and dietary supplementation in regards to weight gain, weight loss, and performance enhancement. Our hope is that ISSN members and individuals interested in sports nutrition find this review useful in their daily practice and consultation with their clients.     

Acute effects of ingesting a commercial thermogenic drink on changes in energy expenditure and markers of lipolysis

Background  

To determine the acute effects of ingesting a thermogenic drink (Celsius, Delray Beach, FL) (TD) on changes in metabolism and lipolysis.     

Effects of acute and 14-day coenzyme Q10 supplementation on exercise performance in both trained and untrained individuals

Background

To determine whether acute (single dose) and/or chronic (14-days) supplementation of CoQ10 will improve anaerobic and/or aerobic exercise performance by increasing plasma and muscle CoQ10 concentrations within trained and untrained individuals.

Methods

Twenty-two aerobically trained and nineteen untrained male and female subjects (26.1 ± 7.6 yrs, 172 ± 8.7 cm, 73.5 ± 17 kg, and 21.2 ± 7.0%) were randomized to ingest in a double-blind manner either 100 mg of a dextrose placebo (CON) or a fast-melt CoQ10 supplement (CoQ10) twice a day for 14-days. On the first day of supplementation, subjects donated fasting blood samples and a muscle biopsy. Subjects were then given 200 mg of the placebo or the CoQ10 supplement. Sixty minutes following supplement ingestion, subjects completed an isokinetic knee extension endurance test, a 30-second wingate anaerobic capacity test, and a maximal cardiopulmonary graded exercise test interspersed with 30-minutes of recovery. Additional blood samples were taken immediately following each exercise test and a second muscle biopsy sample was taken following the final exercise test. Subjects consumed twice daily (morning and night), 100 mg of either supplement for a period of 14-days, and then returned to the lab to complete the same battery of tests. Data was analyzed using repeated measures ANOVA with an alpha of 0.05.

Results

Plasma CoQ10 levels were significantly increased following 2 weeks of CoQ10 supplementation (p < 0.001); while a trend for higher muscle CoQ10 levels was observed after acute CoQ10 ingestion (p = 0.098). A trend for lower serum superoxide dismutase (SOD) was observed following acute supplementation with CoQ10 (p = 0.06), whereas serum malondialdehyde (MDA) tended to be significantly higher (p < 0.05). Following acute ingestion of CoQ10, plasma CoQ10 levels were significantly correlated to muscle CoQ10 levels; maximal oxygen consumption; and treadmill time to exhaustion. A trend for increased time to exhaustion was observed following 2 weeks of CoQ10 supplementation (p = 0.06).

Conclusion

Acute supplementation with CoQ10 resulted in higher muscle CoQ10 concentration, lower serum SOD oxidative stress, and higher MDA levels during and following exercise. Chronic CoQ10 supplementation increased plasma CoQ10 concentrations and tended to increase time to exhaustion. Results indicate that acute and chronic supplementation of CoQ10 may affect acute and/or chronic responses to various types of exercise.     

Effect of Processing Parameters on the Morphology of Hydrothermally Derived PbTiO3 Powders

The influence of processing parameters on the growth and morphology of hydrothermally derived lead titanate (PbTiO₃) powders was investigated. PbTiO₃ powder was synthesized by suspending nanocrystalline powders of TiO₂ in aqueous solutions of KOH and Pb(CH₃COO)₂·3H₂O at temperatures ranging from 120° to 200°C. PbTiO₃ growth initiated in the <100> exposing the (001) surfaces and resulting in a faceted platelet morphology. Particle growth proceeded by further nucleation and growth on existing (001) surfaces. Through repeated dissolution and precipitation, the platelet clusters coarsened into larger cuboidal particles. PbTiO₃ particle size was controlled by either inhibiting or promoting dissolution-precipitation. Dissolution-precipitation was inhibited by lowering the KOH concentration or the reaction temperature, or maintaining an excess of lead ions in solution, while it was promoted by increasing the KOH concentration and temperature. Coarsening of PbTiO₃ particles coincided with decreases in the X-ray diffraction (XRD) peak breadth, the asymmetry of l component XRD reflections, and the c -axis length.     

Gas-phase synthesis of single-walled carbon nanotubes on catalysts producing high yield

Composite catalysts are employed for high yield gas-phase synthesis of single-walled carbon nanotubes (SWCNTs). Specifically, silicon is investigated as an additive to iron catalysts for synthesis of SWCNTs in inverse diffusion flames. While silicon is often used as a substrate in supported-catalyst processes to promote nanotube growth, this study demonstrates that it can also be beneficial for gas-phase nanotube synthesis in diffusion flames. An oxy-fuel ethylene inverse diffusion flame is employed to provide a soot-free, carbon-rich environment for nanotube growth. Iron and silicon precursors are added to the fuel stream for nucleation of iron/silicon/oxygen catalyst particles, with the amount of particle oxidation determined by the amount of oxygen-enrichment and fuel dilution at a given temperature. Under optimum conditions, nearly 90% of the catalyst particles produce single-walled carbon nanotubes as compared to less than 10% when the catalyst consists of only iron and oxygen. The effect of silicon addition is investigated through variation of the iron/silicon ratio and measurement of nanotube growth rates. Silicon is shown to primarily affect SWCNT inception with minimal influence on growth rate.     

Buckminsterfullerene's (C60) octanol-water partition coefficient (Kow) and aqueous solubility

To assess the risk and fate of fullerene C60 in the environment, its water solubility and partition coefficients in various systems are useful. In this study, the log Kow of C60 was measured to be 6.67, and the toluene-water partition coefficient was measured at log Ktw = 8.44. From these values and the respective solubilities of C60 in water-saturated octanol and water-saturated toluene, C60's aqueous solubility was calculated at 7.96 ng/L(1.11 x 10(-11) M) for the organic solvent-saturated aqueous phase. Additionally, the solubility of C60 was measured in mixtures of ethanol-water and tetrahydrofuran-water and modeled with Wohl's equation to confirm the accuracy of the calculated solubility value. Results of a generator column experiment strongly support the hypothesis that clusters form at aqueous concentrations below or near this calculated solubility. The Kow value is compared to those of other hydrophobic organic compounds, and bioconcentration factors for C60 were estimated on the basis of Kow.     

Evaluation of several modifications of an ecometric technique for assessment of media performance

Recovery of Listeria monocytogenes 101M, Jonesia denitrificans, salmonellae, and Pediococcus sp. NRRL B-2354 across nine media was evaluated with three modified versions of an ecometric method. Two approaches involved the use of broth cultures (10(8) to 10(9) CFU/ml) of individual strains and either large (10-microl) or small (1-microl) presterilized plastic loops. The third approach involved precultured slants and the inoculation of media with presterilized plastic inoculating needles (10(4) CFU per needle). Absolute growth indices (AGIs) were compared. No significant differences (P < 0.05) between methods were found when tryptic soy agar supplemented with 0.6% yeast extract (TSAYE) was used for the recovery of L. monocytogenes, J. denitrificans, Pediococcus sp. NRRL B-2354, and Salmonella spp. However, the small loop-broth technique recovered significantly fewer Salmonella enterica Typhimurium DT104 and Salmonella Senftenberg 775W cells than the other two techniques did. The performance of each individual bacterial strain on each of nine media was assayed. The recovery of L. monocytogenes was excellent (AGI > 4.8) with TSAYE, PALCAM, modified Oxford medium (MOX), and Baird-Parker agar and slight with modified PRAB (AGI = 0.4) and deMan Rogosa Sharpe (MRS) agar (< 0.1), and the organism was not recovered with the remaining media (modified lysine iron agar [MLIA], xylose lysine desoxycholate [XLD] agar, and xylose lysine tergitol 4 [XLT4] agar). The recovery of J. denitrificans with TSAYE and MOX was excellent, significantly better than that achieved with PALCAM (AGI = 3.0), but the organism was not recovered with Baird-Parker agar or with the other media tested. The recovery of Pediococcus sp. NRRL B-2354 was excellent with TSAYE and modified PRAB medium > Baird-Parker agar > acidified MRS agar, but the organism was not recovered with any of the other media tested. The best recovery of S. enterica Typhimurium DT104 was achieved with TSAYE > MLIA > or = XLD agar > or = XLT4 agar > Baird-Parker > PALCAM, MOX, acidified MRS agar, modified PRAB, and MRS agar. The best recovery of Salmonella Senftenberg 775W was achieved with TSAYE, MLIA, and XLD agar > XLT4 agar, but the organism was not recovered with the other media evaluated.