Specific substitutions at amino acid 256 of the sarcoplasmic/endoplasmic reticulum Ca2+ transport ATPase mediate resistance to thapsigargin in thapsigargin-resistant hamster cells

High levels of resistance to thapsigargin (TG), a specific inhibitor of intracellular Ca2+ transport ATPases (SERCAs), can be developed in culture by stepwise exposure of mammalian cells to increasing concentrations of TG. We have identified, in two independently selected TG-resistant hamster cell lines of different lineages, mutant forms of SERCA. In the TG-resistant Chinese hamster lung fibroblast cell line DC-3F/TG, a T --> C change at nucleotide 766 introduces a Phe256 --> Leu alteration within the first cytosolic loop of the SERCA. In contrast, in the TG-resistant Syrian hamster smooth muscle cell line DDT/TG 4 microM, a T --> C change at nucleotide 767 introduces a Phe256 --> Ser mutation at that position. When these specific mutations are introduced into a wild-type full-length avian SERCA1 cDNA, transfection experiments reveal that Ca2+ transport function and ATP hydrolytic activity are not altered by such mutations. However, a 4-5-fold resistance to TG inhibition of Ca2+ transport function occurs upon the introduction of either the Phe256 --> Leu or the Phe256 --> Ser mutation into wild-type SERCA1. These specific mutations also render the hydrolytic activity of the ATPase resistant to inhibition by TG. Our results not only implicate amino acid 256 in TG-SERCA interactions, but also demonstrate that specific mutations within SERCA can mediate resistance to TG.     

A study of the diagnostic accuracy and reliability of the Scoliometer and Adam's forward bend test

STUDY DESIGN: Study of the diagnostic accuracy and interexaminer reliability of scoliosis diagnostic tests. OBJECTIVES: To estimate the sensitivity, specificity, and predictive value of the Scoliometer (National Scoliosis Foundation, Watertown, MA) and Adam's forward bend test in diagnosing scoliosis, and to determine the interexaminer reliability of the Scoliometer and Adam's forward bend test. SUMMARY OF BACKGROUND DATA: Exposure to diagnostic radiation in patients with adolescent idiopathic scoliosis may result in a small but significant increase in cancer rates. The full-spine radiographic examination remains the standard procedure for the assessment of scoliosis. There is a need for a valid and reliable noinvasive test to assess scoliosis. METHODS: Two examiners independently assessed 105 patients presenting to a scoliosis clinic for trunk asymmetry with Adam's forward bend test and axial trunk rotation with the Scoliometer. The Cobb method served as the gold standard. RESULTS: The interexaminer agreement for the Scoliometer is excellent in the thoracic spine and substantial in the lumbar spine. The interexaminer measurement error shows poor precision for thoracic and lumbar Scoliometer measurements. The interexaminer agreement for Adam's forward bend test is substantial in the thoracic spine and poor in the lumbar spine. Adam's forward bend test is more sensitive than the Scoliometer in detecting thoracic curves measuring 20 degrees or more by the Cobb method. Receiver operating characteristic curve analysis suggests that the use of the Scoliometer marginally improves the ability of diagnosing a scoliosis in the thoracic spine. CONCLUSIONS: The Scoliometer and Adam's forward bend tests have adequate interexaminer reliability for the assessment of thoracic curves. The Scoliometer has better interexaminer agreement in the lumbar spine. However, the Scoliometer has a high level of interexaminer measurement error that limits its use as an outcome instrument. Because Adam's forward bend test is more sensitive than the Scoliometer, the authors believe that it remains the best noninvasive clinical test to evaluate scoliosis.     

Effects of alkalization and fiber loading on the mechanical properties and morphology of bamboo fiber composites. II. Resol matrix

Resol resin composites reinforced with alkali‐treated bamboo strips were fabricated with a hand‐lay‐up technique. This study was aimed at the evaluation of the influence of the caustic concentration on the mechanical properties of bamboo‐strip‐reinforced resol composites with a constant 50% loading of the reinforcement. The treatment of bamboo fiber in a solution of sodium hydroxide with increasing concentration percentages resulted in more and more rigid composites; as a result, the strength and modulus values exhibited improvements. The maximum improvement in the properties was possibly achieved with 20% caustic treated reinforcements. An infrared study indicated the formation of aryl alkyl ether with ? OH groups of cellulose and methylol groups of resol. Beyond 20%, there was degradation in all the strength properties due to the failure of the mechanical properties of the reinforcement itself. A correlation was found to exist between the mechanical properties and the morphology that developed. Another set of composites with variable loadings of 20% alkali treated fiber (40, 50, and 60%) was fabricated, and a 60% fiber loading showed the best mechanical properties. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Electron microscopy of shock deformation in alumina

Shock recovered samples of a coarse grain (10 μm), high density (>99.9% theoretical) alumina from asymmetric impact tests conducted at 6.5 GPa (e.g. 3.2 times its Hugoniot Elastic Limit) in a single stage gas gun and characterized by X-ray diffractometry, scanning and field emission scanning electron microscopy, and transmission electron microscopy showed prolific presence of reduced crystallite size, higher average microstrain, grain localized micro/nano-scale deformations, micro-cleavages, grain-boundary microcracks, micro-wing crack formation, extensive shear induced deformations and fractures localized at grains, grain boundaries and triple grain junctions, grain localized entanglement of dislocations and their pile up impeded at grain boundaries. A new qualitative model based on micro-shear and micro-twist induced deformation and fracture in single and/or multiple planes in suitably oriented grain and/or grain assembly was developed to explain the experimentally observed damage evolution process.     

Influences of Mesoporosity Generation in ZSM-5 and Zeolite Beta on Catalytic Performance During <Emphasis Type=Italic>n</Emphasis>-Hexane Isomerization

Abstract  

Catalytic performance of Pt impregnated parent and desilicated nano-crystalline zeolites, ZSM-5 and Beta for n-hexane isomerization was studied. Difference in channel systems of the zeolites and absence/presence of mesopores therein were found to be reflected in product distributions. ZSM-5 was desilicated by NaOH and zeolite Beta with tetramethylammonium hydroxide (TMAOH.) Desilication was found to afford comparable catalytic performance to that of the parent counterpart at reaction temperature lower by 25 °C. Observed product distributions could be substantiated with characterizations such as ammonia TPD, surface area determination and SEM. Desilicated zeolite Beta was seen to be less prone to coking as deduced from the TGA study. Location of Pt with reference to proton sites within the channels and that inside the pores viz a viz external surface also have been discussed briefly.     

Synthesis and characterization of polyaniline/carbon nanotube composites

The synthesis of polyaniline (PANI) containing different carbon nanotubes (CNTs) by in situ polymerization is reported in this study. The samples were characterized by X‐ray diffraction and scanning electron microscopy. Fourier transform infrared and ultraviolet–visible spectroscopy were used to determine the change in structure of the polymer/CNT composites. Thermogravimetric analysis showed that the composites had better thermal stability than the pure PANI. Photoluminescence spectra showed a blueshift in the PANI–single‐walled nanotube (SWNT) composite. Low‐temperature (77–300 K) electrical transport properties were measured in the absence and presence of a magnetic field up to 1 T. Direct‐current conductivity exhibited a nonohmic, three‐dimensional variable range hopping mechanism. The room‐temperature magnetoconductivity of all of the investigated samples except the PANI–SWNT composite were negative; however, it was positive for the PANI–SWNT composite, and its magnitude decreased with increasing temperature. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Studies on the engineering properties of LCP‐Vectra B 950/PP blends with the variations of EAA content

Polypropylene (PP) was melt blended with Vectra B‐950 [a thermotropic liquid crystalline polymer (LCP)], in a single screw extruder in presence of different doses of ethylene acrylic acid (EAA) copolymer, as modifier. The effect of incorporation in different proportions of EAA at a fixed dose of 5% LCP, on mechanical, thermal, morphological, and rheological properties of such blends was studied and the same were compared with that of pure PP and amongst themselves. Mechanical analysis (tensile properties) of the prepared blends exhibited improvements in ultimate tensile strength (UTS), modulus, toughness, hardness, and impact strength of PP matrix with the incorporation of EAA. The improvement in mechanical properties is associated with the formation of LCP fibrils as evidenced by scanning electron microscopy (SEM). A strong interaction through H‐bonding between the segments of Vectra B‐950 and EAA was established by FTIR study. Differential scanning calorimetry (DSC) studies indicated substantial increase in melting point of the blends, and thermogravimetric analysis (TGA) showed that the thermal stability of PP was improved with the addition of LCP and EAA. Rheological properties showed that LCP and EAA drop down the melt viscosity of PP and thus facilitate processibility of blends. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Mechanical and tribological properties of silicon carbide coating on Inconel alloy from liquid pre-ceramic precursor

Liquid polycarbosilane (LPCS) derived hard coatings of silicon carbide (SiC) were deposited on Inconel alloy at three different moderately high temperatures by chemical vapour deposition. The deposited films were characterized by X-ray diffractometry and Field emission scanning electron microscopy. Liquid PCS yielded a mixture of α-SiC and β-SiC during decomposition having uniform round-shaped particles of dimension around 200–300 nm without extensive cracking and few discrete shaped particles were also found to form at higher temperature (i.e. 1100 °C and 1200 °C) deposited films. The coated samples showed substantial increment in hardness and fracture toughness as compared to the uncoated sample. The fracture toughness (K_IC) values of the deposited films were in the range of 6.7–10.7 MPa(m)^1/2. The tribological properties and hardness of the films were also found to vary with deposition temperature. The scratch tracks of the films revealed that brittle failures occurred in all SiC coated substrates.     

Analysis of Fatty Acid and Lignan Composition of Indian Germplasm of Sesame to Evaluate Their Nutritional Merits

An attempt was made to individually analyze a germplasm collection of 54 indigenous Indian sesame cultivars for fatty acid and lignan composition of their seed oil by gas chromatography and high performance liquid chromatography, respectively. The entries varied in their fatty acid and lignan composition. The mean percentage contents of palmitic, stearic, oleic, linoleic and α‐linolenic acids ranged between 10–22, 5–10, 38–50, 18–43 and less than 1 whereas sesamol, sesamin and sesamolin scored between 3–37, 27–67, 20–59 of the total percentage of lignan, respectively. The highest percentage of α‐linolenic acid (ALA) was obtained in Var‐9 (1.3 % of the total fatty acids). Among the lignans, high sesamin content is considered to be significant, particularly in terms of long shelf life and nutraceutical value of sesame seed oil. The study has broadened our understanding related to differential biochemical composition of the rich sesame germplasms, thereby providing us with a useful groundwork for identifying potential targets and suitable cultivars for genetic engineering approaches to be undertaken in order to improve the nutritional quality of sesame oil, which in turn would be beneficial towards human health.     

A facile synthesis of a novel three‐phase nanocomposite: Single‐wall carbon nanotube/silver nanohybrid fibers embedded in sulfonated polyaniline

A three‐phase water‐soluble nanocomposite of single wall carbon nanotube/silver nanoparticle hybrid fibers embedded in sulfonated polyaniline has been synthesized by a simple chemical solution mixing process. The nanocomposite has been characterized by high resolution electron microscopy, X‐ray diffractometry, FTIR spectroscopy, Raman spectroscopy, and thermogravimetric analysis. Optical and electrical characteristics of the nanocomposite have been determined by UV–vis absorption spectroscopy, photoluminescence spectroscopy, and four‐probe electrical conductivity measurement. A surface plasmon absorption band obtained around 460 nm indicates the presence of silver nanoparticles in the composite. The optical band gap calculation for sulfonated polyaniline vis‐a‐vis the nanocomposite supported the conductivity measurement. Over 1300 times increase in DC electrical conductivity has been observed for the three‐phase nanocomposite, with a filler loading of 20 wt %, at 306 K. This observation could be explained by Mott's variable range hopping model considering a three‐dimensional conduction. Such a nanocomposite has immense potential for use as a cathode material in lithium‐ion batteries and supercapacitors. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41692.