Residues essential for the function of SecE, a membrane component of the Escherichia coli secretion apparatus, are located in a conserved cytoplasmic region

Protein export in Escherichia coli is absolutely dependent on two integral membrane proteins, SecY and SecE. Previous deletion mutagenesis of the secE gene showed that only the third of three membrane-spanning segments and a portion of the second cytoplasmic region are necessary for its function in protein export. Here we further define the residues important for SecE function. Alignment of the SecE homologues of various eubacteria reveals that they all contain one membrane-spanning segment, compared with three in E. coli SecE, and that the most conserved region among them lies in their putative cytoplasmic amino termini; little homology exists in their membrane-spanning segments. The SecE homologue of the extreme thermophilic bacterium Thermotoga maritima was cloned and found to complement a deletion of secE in E. coli. Deletion or replacement of the cytoplasmic region of E. coli SecE eliminated SecE function, indicating that this sequence is essential for a functional secretion machinery. Mutant analysis suggests that the most important function of the third membrane-spanning segment is to maintain the proper topological arrangement of the conserved cytoplasmic domain.     

Pd-Ge contact to n-GaAs with the TiW diffusion barrier

Pd-Ge based ohmic contact to n-GaAs with a TiW diffusion barrier was investigated. Electrical analysis as well as Auger electron spectroscopy and the scanning electron microscopy were used to study the contact after it was subjected to different furnace and rapid thermal annealing and different aging steps. All analyses show that TiW can act as a good barrier metal for the Au/Ge/Pd/n-GaAs contact system. A value of 1.45 × 10⁻⁶ Ω-cm² for the specific contact resistance was obtained for the Au/TiW/Ge/Pd/n-GaAs contact after it was rapid thermally annealed at 425°C for 90 s. It can withstand a thermal aging at 350°C for 40 h with its ρ_c increasing to 2.94 × 10⁻⁶Ω-cm² and for an aging at 410°C for 40 h with its ρ_c increasing to 1.38 × 10⁻⁵ Ω-cm².     

Integration of mobile vehicles for automated material handlingusing Profibus and IEEE 802.11 networks

This paper focuses on a method to integrate mobile devices such as a mobile robot, automated guided vehicle, and unmanned container transporter to form an automated material handling system. In this paper, the stationary devices are connected via a Profibus network while the mobile devices are communicating via an IEEE 802.11 wireless LAN. In order to integrate these two networks, a protocol converter is developed on a PC platform that runs two interacting processes with shared internal buffers. The protocol converter performs a role of translator between two different protocols by converting the format of a data frame. In addition to this basic conversion function, the protocol converter has a virtual polling algorithm to reduce the uncertainty involved in accessing the wireless network. Finally, the integrated network. of Profibus and IEEE 802.11 is experimentally evaluated for its data latency and throughput, which shows the feasibility of the Profibus-IEEE 802.11 network for industrial applications involving mobile devices     

A mixed design approach for probabilistic structural durability

In this paper, a mixed approach for probabilistic structural durability design of mechanical systems is proposed. In this approach, a deterministic design optimization that considers structural crack initiation and crack propagation lives at critical points of the structural component as design constraints is performed first. After an optimal design is obtained, a reliability analysis is performed to ascertain if the deterministic optimal design is reliable. If the probability of the failure of the deterministic optimal design is found to be acceptable, a reliability-based design approach that employs a set of interactive design steps, such as trade-off analysis and what-if study, is used to obtain a near-optimal design that is reliable with an affordable computational cost. A 3-D tracked vehicle roadarm is employed to demonstrate the feasibility of the proposed approach.     

Substance use as a robust correlate of school outcome measures for ethnically diverse adolescents of Asian/Pacific Islander ancestry.

School psychologists are generally not provided with the knowledge and skills to address both educational and psychosocial issues of Asian American and Pacific Islander students. The present study is the first of its kind in examining 36 independent (i.e., demographic, social, cultural, psychological) variables in association with four school outcomes (i.e., grade point average, absences, suspensions, and school infractions) with a large sample of Caucasian, Filipino, Native Hawaiian, Japanese, mixed/non-Hawaiian, and "other" Hawai'i high school students (N = 2,833). Given the relatively unique sample in question and the sheer number of variables, an exploratory approach was utilized with the goal of determining the most robust independent variables, with the unique inclusion of Hawaiian cultural identification. A cross-validation technique was used, whereby stepwise regressions were performed for each of two cross-validation samples; only common variables were retained in a final stepwise model for each of the four school outcomes. The results indicated that, remarkably, substance use accounted for the most variance (i.e., 8.4% -16.1 %) in the four school measures. Further analyses detailed the relationship, including the finding that smoking cigarettes regularly, accounted for the most variance compared to the other five substance use items. Further research and implications of the findings are discussed, including the need for prevention and intervention programs that incorporate substance use as a component, both within and outside of school environments. (PsycINFO Database Record (c) 2011 APA, all rights reserved)     

Low RF noise and power loss for ion-implanted Si having an improved implantation process

Very-low-transmission line noise of <0.25 dB at 18 GHz and low power loss /spl les/0.6 dB at 110 GHz have been measured on transmission lines fabricated on proton-implanted Si. In contrast, a standard Si substrate gave much higher noise of 2.5 dB and worse power loss of 5 dB. The good RF integrity of proton-implanted Si results from the high isolation impedance to ground, as analyzed by an equivalent circuit model. The proton implantation is also done after forming the transmission lines at a reduced implantation energy of /spl sim/4 MeV. This enables easier process integration into current VLSI technology.     

A new predictive search area approach for fast block motion estimation

According to the observation on the distribution of motion differentials among the motion vector of any block and those of its four neighboring blocks from six real video sequences, this paper presents a new predictive search area approach for fast block motion estimation. Employing our proposed simple predictive search area approach into the full search (FS) algorithm, our improved FS algorithm leads to 93.83% average execution-time improvement ratio, but only has a small estimation accuracy degradation. We also investigate the advantages of computation and estimation accuracy of our improved FS algorithm when compared to the edge-based search algorithm of Chan and Siu (see IEEE Trans. Image Processing, vol.10, p.1223-1238, Aug. 2001); experimental results reveal that our improved FS algorithm has 74.33% average execution-time improvement ratio and has a higher estimation accuracy. Finally, we further compare the performance among our improved FS algorithm, the three-step search algorithm, and the block-based gradient descent search algorithm.     

A new MMIC broadside coupler using an array of air-bridges for directivity enhancement

A new quadrature broadside coupler is proposed, which employs an array of air-bridges to enhance directivity via its phase-equalization effect on the c-mode and /spl pi/-modes. The realization of air-bridges follows a standard MMIC fabrication process. An experimental chip fabricated on the 75-/spl mu/m GaAs substrate verifies the air-bridge effect and shows wideband characteristics of the coupling of 3.2/spl plusmn/0.4 dB, the insertion loss of 3.9/spl plusmn/0.4 dB, the output phase deviation from quadrature less than 6/spl deg/, and the isolation greater than 18 dB from 20 to 40 GHz.     

Modeling Temperature in Coupled Electrical and Thermal Simulations of the Electroconsolidation® Process

Electroconsolidation® is a process for densifying complex-shaped parts by using electrically conductive particulate solids as a pressure-transmitting medium. The part is immersed in a bed of the particulate medium contained in a die chamber. Sintering temperature is achieved by resistive heating of the medium while applying compaction pressure. The process is capable of ultrahigh temperatures and short cycle times and offers the potential for low processing costs.

Control of the process and selection of process conditions require knowledge of the temperatures within the die. Temperature gradients exist because of the high heating rate and because of variations of density and electrical resistivity of the medium due to the presence of the part. Direct measurement of temperature with thermocouples or other conventional means is impractical because of the high temperatures, high currents, and high pressures that are involved. Therefore, a computer model was developed to predict temperature as a function of time and applied voltage for any location in the die. The computer model is composed of three parts: a geometrical model to approximate the density and resistivity variations in the medium, a finite-element model to calculate the rate of resistive heating within each element, and a finite-difference model to calculate the temperature distribution based on solution of the heat-transfer equations. Predicted temperatures have been shown to be in excellent agreement with measurements, and numerical simulation provided encouraging consistency and reasonably accurate predictions of temperature profiles within the die. The model demonstrated the feasibility of a new process to achieve simultaneous application of pressure and heat to powder densification in Electroconsolidation.     

Fabrication and characteristics of high-speed implant-confined index-guided lateral-current 850-nm vertical cavity surface-emitting lasers

Process technology of high-speed implant-apertured index-guide lateral-current-injection top dielectric-mirror quantum-well 850-nm vertical cavity surface-emitting lasers (VCSELs) has been developed. Oxygen and helium implantation for aperture definition and extrinsic capacitance reduction, dielectric mirror formation, p- and n-ohmic contact formation, VCSEL resistance, and thermal analysis were investigated. Employing this technology, GaAs/AlGaAs-based 850-nm VCSELs with small signal modulation bandwidths up to 11.5 Gb/s and an eye diagram generated at 12 Gb/s by a pseudorandom bit sequence of 2/sup 31/-1 were achieved. The bit-error rates were below 10/sup -13/. The threshold current is as low as 0.8 mA for 7-/spl mu/m-diameter current apertures and typical slope efficiencies of 0.45-0.5 mA/mW were obtained.