Medium access protocol design for delay-guaranteed multicode CDMA multimedia networks

To enable multimedia real-time applications over next-generation wireless code-division multiple access (CDMA) packet-switching networks, previous efforts show a proper scheduling policy is the key to provide delay-guaranteed access services to various traffic types with different bit error rate (BER) requirements. Considering the support of the prevailing Internet protocol (IP) with variable-length packets in future mobile networks, we develop a mathematically delay-optimal medium access control (MAC) protocol over multicode CDMA (MC-CDMA) environments under the continuous-time assumption. From our investigations, we suggest that a good MAC protocol should be designed by using a proper single-server scheduling policy to guarantee packet-delay, and controlling the maximal number of simultaneous spreading-code transmissions to maintain the required BER. We further evaluate the performance of some MC-CDMA MAC protocols supporting QoS on BER and packet-delay, and show that MAC schemes conforming to our design rules give better performance on packet-delay when maintaining acceptable BER of various traffic types.     

Catalytic dehydrogenation of ethylbenzene with carbon dioxide: promotional effect of antimony in supported vanadium–antimony oxide catalyst

Alumina-supported vanadium oxide, VO_x/Al₂O₃, and binary vanadium–antimony oxides, VSbO_x/Al₂O₃, have been tested in the ethylbenzene dehydrogenation with carbon dioxide and characterized by S_BET, X-ray diffraction, X-ray photoelectron spectroscopy, hydrogen temperature-programmed reduction and CO₂ pulse methods. VSbO_x/Al₂O₃ exhibited enhanced catalytic activity and especially on-stream stability compared to VO_x/Al₂O₃ catalyst. Incorporation of antimony into VO_x/Al₂O₃ increased dispersion of active VO_x species, enhanced redox properties of the systems and formed a new mixed vanadium–antimony oxide phase in the most catalytically efficient V_0.43Sb_0.57O_x/Al₂O₃ system.     

An electrooptic intensity modulator with improved linearity

A highly linear electrooptic modulator has been designed, fabricated, and evaluated. The design of this modulator consists of only a simple modification to the directional coupler. Two-tone testing has demonstrated that, for an optical modulation depth of 30% per channel, the third-order intermodulation distortion is more than 30 dB lower than that of the conventional directional coupler or Mach-Zehnder modulators. This improvement was not observed to be accompanied by any increase in second harmonic distortion. Also included are results of two-tone computer simulations which predict the improvement in linearity of this device for a range of modulation depths.<>     

Two schemes for detecting CMOS analog faults

A design-for-testability scheme for detecting CMOS analog faults was reported by Favalli et al. (see ibid., vol.25, no.5, p.1239-46, 1990). The authors propose two alternative designs, one for small circuits and another for large circuits, which require significantly less area overhead (about 1/4 to 1/3) than that of Favalli's design. With the proposed modification in the first design, the untestable problem, which occurred in Favalli's design, can be alleviated. Furthermore, the proposed schemes are also fit to be implemented in VLSI circuits     

Microstrip reflectarray antenna with offset feed

The authors derive and verify the concept of antenna focusing by a planar 'microstrip reflectarray' antenna. Experimental results from schematically distributed patch radiators with microstrip delay lines are consistent with the simulation results. The advantages and disadvantages of such an antenna are described. The measured overall antenna efficiency is approximately 48% at scan angles up to 30 degrees . These results demonstrate the feasibility of such an antenna.<>     

A hybrid wafer-dicing process for GaAs MMIC production

A dicing process for GaAs MMIC (monolithic microwave integrated circuit) wafers using spin-on wax for wafer mounting and a hybrid process of wet chemical etching/mechanical sawing for chip dicing is described. This process minimizes ragged chip edges and reduces generation of microcracks in addition to the elimination of the plated gold burrs on the backside of the diced MMIC chips. This process gives a uniformity of -3 μm across a 2-in wafer following the completion of the whole backside process. This GaAs chip dicing technique is amenable to production because it exhibits both a very high chip yield (>90%) and nearly flawless edges     

四论注入光敏器件的物理基础

叙述了从现象的发现到理论分析，然后用实验进行验证，最后利用这个现象研制成注入光敏器件的全过程，从而证明注入光敏器件有牢靠的物理基础。本文还分析了文献（１￣５，１０）中的几个主要不同论点及欠妥的讨论方法。     

Effect of postischemic reperfusion on microcirculation and lipid metabolism of skeletal muscle

To study the effect of ischemia reperfusion injury on microvascular reactivity and tissue metabolism in skeletal muscle, a Sprague-Dawley rat cremaster muscle was prepared as a tourniquet ischemia model and subjected to 2 hr ischemia followed by 1 hr reperfusion to simulate the timing of ischemia during microvascular surgery. The dose-response curve of arteriolar reactivity to norepinephrine, lipid peroxidation, and ultrastructure of capillaries was determined in both the control and postischemic reperfusion stages. Judging from the results, we summarize our observations as follows: (1) Postischemic reperfusion significantly increased arteriolar reactivity to norepinephrine, in which the EC50 for vasoconstriction decreased in all three orders of arterioles. These results suggest that reperfusion could have impaired the vasodilation control mechanism, possibly being endothelium dependent. (2) Lipid peroxidation increased sixfold in the reperfusion group, suggesting that oxygen free radicals have produced significant tissue damage under the created conditions. (3) Significant endothelial damage in the capillaries shown by electron microscope observation supports these studies, indicating that ischemia/reperfusion in clinically transplanted skeletal muscles could cause significant damage to the tissue microcirculation both physiologically and metabolically.     

Combination cytotoxic effects of cis-diamminedichloroplatinum(II) and 5-fluorouracil with and without leucovorin against human non-small cell lung cancer cell lines

Both cisplatin (CDDP) and leucovorin (LV) have been shown to enhance cytotoxicity of 5-fluorouracil (FUra) against murine and human neoplasms by increasing intracellular reduced folate concentrations. We were interested in their use in a combination to inhibit non-small cell lung cancer (NSCLC) cell growth and therefore conducted an in vitro study to investigate the cytotoxic activities of combinations of CDDP plus FUra, with and without LV (20 microM), against seven NSCLC cell lines. A tetrazolium assay with application of the classical isobole method was used to test drug combinations. We found that LV enhanced FUra but not CDDP cytotoxicity and that the degree of enhancement was negatively correlated with the effect of FUra. There was an overall additive combination effect of CDDP plus FUra, although there may be synergy at higher effect levels. There was synergy to a combination of CDDP, FUra, and LV, presumably primarily related to the synergistic effects of adding LV to FUra. In summary, LV and CDDP enhanced FUra cytotoxicity in a complementary fashion and there was clear synergy of a combination of CDDP, FUra, and LV against a panel of NSCLC cell lines. Our in vitro results provide a rationale for controlled clinical studies of this three-drug regimen in patients with NSCLC.