Rat mature sympathetic neurones derive neurotrophin 3 from peripheral effector tissues

In a previous study we have demonstrated that endogenous neurotrophin 3 (NT3) is required for the survival of most sympathetic neurones in postnatal rats. However, the mechanisms underlying the action of NT3 on sympathetic neurones is not known. Neither is it understood whether NT3 is retrogradely transported from peripheral tissues or acts locally in an autocrine fashion. In the present study, NT3-mRNA was quantified in sympathetic effector tissues and NT3 protein was localized in intact and lesioned sympathetic nerves in rats. NT3-mRNA is expressed and developmentally regulated in many effector tissues including mesenteric arteries, salivary gland, heart and kidney but hardly detectable in the superior cervical ganglia of adult animals. The majority of sympathetic neurones express immunoreactivity for TrkA and TrkC in both neonatal and adult rats. Sympathetic somata are normally immunoreactive for NT3, but the immunoreactivity is abolished by systemic administration of NT3 antibodies or axotomy of postganglionic neurones, suggesting an accumulation of NT3 from extraneuronal sources. Furthermore, the detection of NT3-immunoreactivity in the internal carotid nerve as early as 3 h following a compression and only on the distal side indicates endogenous NT3 is retrogradely transported by sympathetic neurones. These studies provide evidence indicating that NT3, like nerve growth factor, is an effector tissue-derived neurotrophic factor for sympathetic neurones both during development and in the adult animal. Thus, we have provided a clear example that one type of neurone derives, through a retrograde transport mechanism, two neurotrophic factors simultaneously from its peripheral effector tissues.     

浅谈托辊的开发与实践

本钢１７００连轧机应用的托辊原由外企业制作，为了减少公司资金外流，公司技术人员和工人结合现有的生产条件，先后攻克了辊身铸造和加工，托辊装配等工艺方面的难关，研制成功了合格的产品，年创经济效益８０万元。     

高性能各向异性Sm2Fe17Nx磁粉的制备

本文研究了高性能各向异性Ｓｍ２Ｆｅ１７Ｎｘ磁粉的制备工艺路线与工艺参数。优化了制备与工艺参数。已制备出磁性能达到：Ｂｒ＝１．３９Ｔ，Ｈｃｉ＝８５０ＫＡ／ｍ和（ＢＨ）ｍ＝２３６ＫＪ／ｍ＾３的各向异性Ｓｍ２Ｆｅ１７Ｎ２．８８磁粉，该磁粉的各向异性场ＨＡ达到２０Ｔ。     

《周培德三角剖分不是最小权三角剖分》一文商榷——反例不成立

周培协三角剖分是否能得到最小权三角剖分，周培德在《周培德三角部分不是最小权三角剖分》一文撰写之前已有新的结论，本文还指出《周培德三角剖分不是最小权三角剖分》一文所举反例不成立。     

HIPS-g-MA共聚物对HIPS/PC共混物相容性、形态和拉伸性能的影响

研究了HIPS／PC共混物的相容性及HIPS－MA对HIPS（30）／PC（70）共混物的相容性、形态和拉伸性能的影响。DSC研究结果表明，HIPS／PC共混物中PS的玻璃化转变温度（Tg)不随组成而变化，而PC的Tg随其质量分数的降低逐渐向低温移动，说明HIPS／PC是部分相容体系。通过DSC、扫描电镜形态观察和拉伸性能测试结果发现，当HIPS－g-MA的含量低于7．5％时，共混物的相容性改善不明显，当其含量达到7．5％时，对共混物有明显的乳化作用，说明饱和的界面浓度在7．5％左右。HIPS－g-MA接枝共聚物在HIPS（30）／PC（70）共混物中的增容作用可能是酯交换反应原位生成的嵌段共聚物所致。     

电沉积Ni-W合金镀层的X射线光电子能谱分析

采用X射线光电子能谱（XPS）对电沉积Ni-W合金镀层表面膜进行了分析。研究结果表明，Ni-W合金镀层表面存在一层薄的氧化膜，而钨的氧化作用远大于镍，Ni-W合金镀层中W含量的提高对耐蚀性起决定作用。     

片状陶瓷材料高低温电性能参数的自动检测

由进口电性能仪配上自制的高温系统，计算机自动采集数据，配置成一套高低温电性参数测定装置，该装置的特点是，升温快，炉体小巧，炉芯可更换盛液氮装置，屏蔽良好，等温区长，温工及参数测量精确可靠。     

液相添加剂对PTCR陶瓷电性能的影响

液相添加剂ＡＳＴ（Ａｌ２Ｏ３＋ＳｉＯ２＋ＴｉＯ２）对ＢａＴｉＯ３陶瓷材料电性能的影响很大，随着Ａｌ２Ｏ３含量的增加，材料的电性能降低；ＳｉＯ２、ＴｉＯ２的物理特性对材料电性能影响较大；过量ＴｉＯ２对材料ＰＴＣ效应有重要影响，适当过量ＴｉＯ２含量，可得到性能优良的ＰＴＣＲ陶瓷。