疏水缔合型聚丙烯酰胺的合成与性能评价

为了提高高相对分子质量的聚丙烯酰胺的抗温抗盐性能,利用自制的两亲表面活性单体与丙烯酰胺共聚合成了疏水缔合型聚丙烯酰胺并进行室内评价。结果表明,在高温、高盐、高钙条件下,合成的疏水缔合型聚丙烯酰胺具有良好的增粘性和较强的热稳定性;克服了疏水缔合型聚合物在盐水中溶解性差的问题,可用各种矿化度的盐水和油田产出污水配制;具有良好的无机盐增粘性能和抗温性能。     

Material removal and surface damage in EDM of Ti3SiC2 ceramic

Material removal and surface damage of Ti₃SiC₂ ceramic during electrical discharge machining (EDM) were investigated. Melting and decomposition were found to be the main material removal mechanisms during the machining process. Material removal rate was enhanced acceleratively with increasing discharge current, i_e, working voltage, u_i, but increased deceleratively with pulse duration, t_e. Microcracks in the surface and loose grains in the subsurface resulted from thermal shock were confirmed, and the surface damage in Ti₃SiC₂ ceramic led to a degradation of both strength and reliability.     

Effect of fluoropolymer antidripping agent on the microstructure and properties of polyesters

Poly(ethylene terephthalate) (PET) is of excellent mechanical properties and melt processability and is widely used as raw material for textile fibers. However, the flame retardant properties of PET were rather poor, and both reactive and additive phosphorus- and halogen-containing compounds have been employed to enhance the reaction-to-fire properties while the meltdripping behaviour during burning hasn’t been handled properly with the flame retardants. In this work, fluoropolymer was blended with both pure PET (pPET) and reactive phosphorus-containing flame retarded copolyester (fPET), and the flame retardance and char formation and mechanical properties of the resulted pPET and fPET blends were investigated. The tensile strengths of modified pPET samples were worsen whereas those of modified fPET samples were improved at low concentrations. The initial thermal degradation in nitrogen was accelerated remarkably for the two polyesters with fluoropolymer. The oxygen indices of the all modified samples were reduced while char formation and meltdripping suppression were encouraged. The apparent melt viscosity and elasticity for the two polyesters were gained much with antidripping agent. Therefore, fluoropolymer improved char formation of the two polyesters based on the gaseous phase mechanism while the partial suppression of meltdripping behavior and the decrease of mechanical properties mainly originated from the increase of melt viscosity via fibrillation for pPET.     

在全省建筑节能工作座谈会上的讲话

今天，召开全省建筑节能工作座谈会，主要目的是总结我省建筑节能工作阶段性情况，交流经验，部署下一步工作。希望大家共同努力，把会议开好，开出实效。会议期间，大家要多交流真实情况，多介绍实在经验，多研究实际问题，找差距、谋发展，多提出一些合理化的建议和意见。下面我讲三点意见．供大家讨论。     

沁水煤田瓦斯含量与地质因素的关系

为确实做好瓦斯的洲报工作，研究了沁水煤田地质因素与瓦斯含量的关系，辩证地分析了瓦斯的赋存规律。     

Evolving Fault-Tolerant Neural Networks

In this paper, genetic algorithm is used to help improve the tolerance of feedforward neural networks against an open fault. The proposed method does not explicitly add any redundancy to the network, nor does it modify the training algorithm. Experiments show that it may profit the fault tolerance as well as the generalisation ability of neural networks.     

基于改进型BP神经网络的湿重软测量

针对制浆造纸工业中湿重无法在线测量的难题，分析了湿重值与进浆流量、打浆浓度、打浆电流及原湿重值等参数的关系。提出了基于改进型BP神经网络的湿重软测量技术。成功的完成了湿重在线检测。     

Evaporation induced self-assembly of zeolite A micropatterns due to the stick-slip dynamics of contact line

In this study, a new surfactant-solvent system was described for the preparation of periodic stripe patterns of zeolite A on solid substrates. The evaporation induced self-assembly of zeolite A particles was due to the stick-slip dynamics of the three-phase contact line of the colloid solutions in acetone containing 10% (v/v) poly(dimethylsiloxane) (PDMS) fluid (2 cst.). In order to investigate the possible effects of particle size and the particle concentration on the stick-slip dynamics, three types of zeolite A samples with different particle sizes (zeolite A-I: 250-500 nm, zeolite A-II: 100-250 nm and zeolite A-III: 0-100 nm) were utilized to prepare 0.007-0.06% (w/v) colloidal dispersions. Zeolite A micropatterns were self-assembled on the surface of glass, high density polyethylene (HDPE) and poly(tetrafluoroethylene) (PTFE) substrates, which were placed vertically inside the colloid solutions and held against the wall of the cylindrical vial during the evaporation of acetone. The stripe patterns of zeolite A particles were analyzed with field emission scanning electron microscope (FE-SEM) and optical microscope. The widths of microstripes and the distance between the stripes were found as 2-20 μm and 40-60 μm respectively depending on the particle concentration. By using the stick-slip dynamics of colloids, the linear micropatterns of zeolite A nanocrystals were prepared with low cost and low energy.     

Validation and modification of WAVE spray model for diesel combustion simulation

In CFD simulation of diesel combustion, the predictive capabilities of the spray model play the most important role. Consequently, under the strict guidelines of the V&V, a method to adjust parameters of diesel spray model WAVE to accompany with the in-cylinder physical progress has been investigated in this paper. Moreover, the simulation of the spray has been validated by high-speed photography experiments and verified by the equation proposed by Hiroyasu. Finally, a modified setup for the WAVE spray model has been proposed and applied in the spray and combustion simulation for Deutz1013 diesel in different engine speed.