地表水质监测模型中的几种人工智能方法

重点对地表水质预测模型的几种人工智能方法进行了评述,具体说明了BP神经网络水质预测模型、地表水COD灰色预测模型、时间数列预测方法及WASP5模型系统等方法的原理和特点.并提出地表水质预测模型WASP5与GIS系统集成的趋势,建立水质自动监测系统是我国水质现状和社会发展的需要,并分析了发展水质自动检测系统的方法及可行性.     

固定床催化合成N,N-二甲基丙胺的研究

以正丙醇和二甲胺为主要原料,采用浸渍法制备负载活性金属的Al2O3催化剂,在固定床反应器中考察了催化剂载体预处理及反应条件对合成N,N-二甲基丙胺的影响.结果表明:一次磷酸处理的A12O3上负载入活性组分(Cu10%,Cr12%)的催化剂具较满意的选择性和活性.较合适的反应工艺条件为压力0.8Mpa,反应温度220℃,空间速度为0.3h-1,进料比为二甲胺:丙醇=3:1,此时产品的收率达到90%以上.     

A new LCL-lens array with electrodes of interlaced structure to be applied for auto-stereoscopic 3D displays

A new design of the liquid crystal lenticular (LCL) lens array with interlaced electrodes is proposed to realize an auto-stereoscopic 3D display. The structure of interlaced electrodes aims to generate a desired non-uniform electric filed to improve the focusing ability of the LCL-lens array with lower voltage drives. This paper is organized as first to describe the design criteria of a lenticular lens sheet for wide extended graphics array LCD panel. Based on the designed lenticular lens array, an LCL-lens array with proposed interlaced electrodes is next designed. The fabrication and the detailed structure are given. A series of experiments are then conducted and successfully verify the focusing capability and desired 3D display functions, that is, to separate two images to right and left eyes. Also, the developed auto-stereoscopic 3D display is able to adapt to varied viewer locations with favorable imaging quality.     

Design and realization of a high resolution (640 × 480) SWIR image acquisition system

A new image acquisition system module for extracting signals of high-resolution short wave infrared (SWIR) from a focal plane array (FPA) is presented in this study. The short wave infrared (SWIR—with wavelength about 900–1,700 nm) images have been proven its unique values in many applications such as military, semiconductor inspection and aviation security. The designs for the SWIR data acquisition system module consists of digitization and acquisition of FPA signals, design of synchronous dynamic random access memory controller and real-time image signal transformation and display. Three major steps involved towards a successful SWIR module—(1) Selection of hardware ICs according to specification for the FPA; (2) Design of a timing generator for the image acquisition system to control FPA and other ICs by Verilog HDL programming; (3) Integrate the individual modules on a PCB. The SWIR image output signals are successfully generated in the format of National Television System Committee (NSTC), which can be displayed on a common NTSC monitor, flat panel displays with an AV input terminal or a CRT display in a favorable speed of frame rate at 30 per second.     

A holistic approach to feature modeling for product line requirements engineering

Requirements engineering (RE) offers the means to discover, model, and manage the requirements of the products that comprise a product line, while software product line engineering (SPLE) offers the means of realizing the products’ requirements from a common base of software assets. In practice, however, RE and SPLE have proven to be less complementary than they should. While some RE techniques, particularly goal modeling, support the exploration of alternative solutions, the appropriate solution is typically conditional on context and a large product line may have many product-defining contexts. Thus, scalability and traceability through into product line features are key challenges for RE. Feature modeling, by contrast, has been widely accepted as a way of modeling commonality and variability of products of a product line that may be very complex. In this paper, we propose a goal-driven feature modeling approach that separates a feature space in terms of problem space and solution space features, and establish explicit mappings between them. This approach contributes to reducing the inherent complexity of a mixed-view feature model, deriving key engineering drivers for developing core assets of a product line, and facilitating the quality-based product configuration.     

仙人掌超氧化物歧化酶的纯化及其部分性质研究

10 0 0g仙人掌茎经匀浆、硫酸铵分级沉淀、SephadexG - 75凝胶层析和DEAE - 5 2离子交换层析 3个步骤 ,将仙人掌SOD纯化到SDS -PAGE均一纯 ,得白色粉状SOD 0 8985g ,比活 910U/mg,活力回收 4 3 1% ,纯化倍数 76。该酶相对分子质量 37 1kD ,H2 O2 和KCN的抑制实验结果表明为Cu、Zn -SOD。该酶的最大紫外吸收在 2 75nm处。 5 0℃保温 15 0min ,SOD的活性不变 ,在pH =5 0～ 9 0时SOD有较好的稳定性     

Detecting Fixed Patterns in Chordal Graphs in Polynomial Time

The Contractibility problem takes as input two graphs G and H, and the task is to decide whether H can be obtained from G by a sequence of edge contractions. The Induced Minor and Induced Topological Minor problems are similar, but the first allows both edge contractions and vertex deletions, whereas the latter allows only vertex deletions and vertex dissolutions. All three problems are NP-complete, even for certain fixed graphs H. We show that these problems can be solved in polynomial time for every fixed H when the input graph G is chordal. Our results can be considered tight, since these problems are known to be W[1]-hard on chordal graphs when parameterized by the size of H. To solve Contractibility and Induced Minor, we define and use a generalization of the classic Disjoint Paths problem, where we require the vertices of each of the k paths to be chosen from a specified set. We prove that this variant is NP-complete even when k=2, but that it is polynomial-time solvable on chordal graphs for every fixed k. Our algorithm for Induced Topological Minor is based on another generalization of Disjoint Paths called Induced Disjoint Paths, where the vertices from different paths may no longer be adjacent. We show that this problem, which is known to be NP-complete when k=2, can be solved in polynomial time on chordal graphs even when k is part of the input. Our results fit into the general framework of graph containment problems, where the aim is to decide whether a graph can be modified into another graph by a sequence of specified graph operations. Allowing combinations of the four well-known operations edge deletion, edge contraction, vertex deletion, and vertex dissolution results in the following ten containment relations: (induced) minor, (induced) topological minor, (induced) subgraph, (induced) spanning subgraph, dissolution, and contraction. Our results, combined with existing results, settle the complexity of each of the ten corresponding containment problems on chordal graphs.     

Use of laser scanning confocal microscopy for characterizing changes in film thickness and local surface morphology of UV-exposed polymer coatings

Laser scanning confocal microscopy (LSCM) has been used to characterize the changes in film thickness and local surface morphology of polymer coatings during the UV degradation process. With the noninvasive feature of LSCM, one can obtain thickness information directly and nondestructively at various exposure times without destroying the specimens or deriving the thickness values from IR measurement by assuming uniform film ablation. Two acrylic polymer coatings were chosen for the study, and the physical and chemical changes of the two systems at various exposure times were measured and analyzed. Those measurable physical changes caused by UV exposure include film ablation, formation of pits and other surface defects, and increases in surface roughness. It was found in both coatings that changes in measured film thickness by LSCM were not correlated linearly to the predicted thickness loss using the changes in the CH band obtained by the Fourier Transform Infrared (FTIR) spectroscopy measurements in the later degradation stages. This result suggested it was not a uniform film ablation process during the UV degradation. At later stages, where surface deformation became severe, surface roughness and profile information using LSCM were also proven to be useful for analyzing the surface degradation process Presented at the 81st Annual Meeting of the Federation of Societies for Coatings Technology, November 13–14, 2004 in Philadelphia, PA.     

接种固氮菌对纤维素分解过程的影响

从纤维素分解菌与联合固氮菌的接种配比,研究了混合培养对滤纸分解的影响。试验共设6个处理样,总接种量均为10%(V/V):处理Ⅰ,2%固氮菌+8%纤维素分解菌;处理Ⅱ,4%固氮菌+6%纤维素分解菌;处理Ⅲ,6%固氮菌+4%纤维素分解菌;处理Ⅳ,10%纤维素分解菌;处理Ⅴ,10%固氮菌;CK(空白对照)。结果显示:与处理Ⅳ相比,处理Ⅰ、Ⅱ的CMC酶活力及处理Ⅰ、Ⅱ、Ⅲ的滤纸分解率有明显提高。接种固氮菌的各处理样中,培养液中氮素含量与CK相比均有显著提高(P<0.05),且培养过程中pH值比较平稳,而未接种固氮菌处理培养液的氮素则低于CK,pH急剧降低。所有处理样中,接种2%固氮菌效果最佳,培养192h,其CMC酶活力与滤纸分解率比处理Ⅳ分别提高43.4%、240%;与处理Ⅴ相比,固氮菌数有显著增加(P<0.05),培养液中氮含量提高28.0%。