Phase‐dependent radiation‐resistant behavior of BaTiO3: An in situ X‐ray diffraction study

The radiation‐resistant response of BaTiO₃ in the tetragonal and rhombohedral phases on exposure to 100 MeV Ag⁷⁺ ion irradiation was investigated by in situ X‐ray diffraction (XRD) at room temperature (300 K) and low temperature (25 K), respectively. This study revealed that the BaTiO₃ in rhombohedral phase retained crystallinity up to an ion fluence of 1×10¹⁴ ions/cm², whereas tetragonal phase amorphized at much lower fluence viz. 1×10¹³ ions/cm². The in situ XRD along with Raman spectroscopy studies revealed that BaTiO₃ in rhombohedral phase is more radiation resistant than that of tetragonal phase. The density functional theory (DFT) calculations confirmed higher bond strength of rhombohedral phase as compared to tetragonal phase, which supported the experimental result of higher radiation stability of rhombohedral phase. The theoretical predictions on high‐temperature phase will be of relevance to the nuclear waste applications.     

Non-traditional machining processes by means of velocity shear instability in plasma

The material removal within different machining process can be performed in distinct modalities. One of the modality is based on the effect of impact phenomenon. In this paper theoretical model of non-traditional machining process based on impact phenomenon is discussed. The material is removed from the surface due to the impact of ions. The velocity of ions is equal to the velocity at which the electrostatic ion-cyclotron instability driven by parallel flow velocity shear generated by massive ions takes place. The main ways for the material removal as consequence of the impact phenomenon are the microcracking, microcutting, melting and vaporizing of small quantities from the work-piece surface layer.     

Characterization of Thermal-Sprayed HAP and HAP/TiO<Subscript>2</Subscript> Coatings for Biomedical Applications

In the present study, hydroxyapatite (HAP) coating along with HAP/TiO₂ coating has been deposited by high-velocity flame spray (HVFS) technique onto 316LSS. Titania was used as a bond coat and HAP as top coat in HAP/TiO₂ coating. The main aim of the study is to investigate the corrosion behavior of thermal spray coating of HAP and HAP/TiO₂ on steel. Electrochemical corrosion testing was carried out using potentiodynamic polarization test. The corrosion behavior of bare and as-sprayed specimens was analyzed in simulated body fluid known as Hank’s solution. As-sprayed specimens along with corroded specimens were further characterized by XRD, SEM/EDS, and x-ray mapping analysis. It was observed that the HAP/TiO₂ coating possessed higher microhardness (280 Hv) as compared to HAP coating (254 Hv). Surface roughness also got enhanced in case of HAP/TiO₂ coating (9.35 μm) as compared to pure HAP coating (7.37 μm). The porosity of the HAP coating was found to be higher than the bond coating. It was observed that the Ca/P ratio almost resembled that of the natural bone composition. The corrosion resistance of steel increased after the deposition of HAP and HAP/TiO₂ coatings. The maximum corrosion resistance was exhibited by HAP/TiO₂ coating.     

Frequency dependent electrical transport properties of 4,4′,4″-tris(N-3-methylphenyl-N-phenylamine)triphenylamine by impedance spectroscopy

The frequency dependent ac conduction mechanism in 4,4′,4″-tris(N-3-methylphenyl-N-phenylamine)triphenylamine (m-MTDATA) has been studied as a function of applied bias and temperature. The Cole–Cole plot shows a slightly depressed semicircle indicating Debye type relaxation. This result has been explained by an equivalent circuit of the device designed as a two parallel resistor and capacitance network in series with contact resistance. The ac conduction studies under dc bias for hole only devices shows an increase in device conductivity with the increase in bias. The variation of bulk resistance with applied bias indicates Space Charge Limited Conduction (SCLC) mechanism for hole conduction. The hole mobility of the material has also been evaluated from SCLC as 8.859 × 10^?6 cm²/V s. The temperature dependent impedance studies show two activation energies indicating two different phase of the material with a phase transition at 235 K.     

Low-Temperature Sintering of La(Ca)CrO3 Powder Prepared through the Combustion Process

Ultrafine La(Ca)CrO₃ (LCC) powder was prepared through the glycine–nitrate gel combustion process. It was shown for the first time that the use of relatively inexpensive CrO₃ as a starting material for chromium has potential for the bulk preparation of sinter-active LCC powder. As-prepared powder, when calcined at 700°C, resulted in LCC along with a small amount of CaCrO₄. The calcined powder was found to be composed of soft agglomerates with a particle size of ≈70–290 nm. The cold pressing and sintering of the calcined powder at 1200°C resulted in the mono-phasic La_0.7Ca_0.3CrO₃ with density ≈98% of its theoretical value. This is the lowest sintering temperature ever reported for La_0.7Ca_0.3CrO₃. The conductivity of the sintered La_0.7Ca_0.3CrO₃ at 1000°C was found to be ≈57 S/cm in air. The sintering and electrical behavior achieved for La_0.7Ca_0.3CrO₃ may find application as an interconnect material for high-temperature solid oxide fuel cells if problems with chemical expansion and poor conductivity in fuel can be overcome.     

Ubiquitin-Specific Protease 29 Regulates Cdc25A-Mediated Tumorigenesis

Cell division cycle 25A (Cdc25A) is a dual-specificity phosphatase that is overexpressed in several cancer cells and promotes tumorigenesis. In normal cells, Cdc25A expression is regulated tightly, but the changes in expression patterns in cancer cells that lead to tumorigenesis are unknown. In this study, we showed that ubiquitin-specific protease 29 (USP29) stabilized Cdc25A protein expression in cancer cell lines by protecting it from ubiquitin-mediated proteasomal degradation. The presence of USP29 effectively blocked polyubiquitination of Cdc25A and extended its half-life. CRISPR-Cas9-mediated knockdown of USP29 in HeLa cells resulted in cell cycle arrest at the G0/G1 phase. We also showed that USP29 knockdown hampered Cdc25A-mediated cell proliferation, migration, and invasion of cancer cells in vitro. Moreover, NSG nude mice transplanted with USP29-depleted cells significantly reduced the size of the tumors, whereas the reconstitution of Cdc25A in USP29-depleted cells significantly increased the tumor size. Altogether, our results implied that USP29 promoted cell cycle progression and oncogenic transformation by regulating protein turnover of Cdc25A.     

Catalytic hydrogenation for improvement of GaAs/Ge solar cell efficiency

Hydrogen passivation on MOCVD grown p-GaAs epilayers on Ge substrate have been studied by plasma and catalytic hydrogenation and the results were compared. The conversion efficiency of the GaAs/Ge solar cells was found to increase by 10% after catalytic hydrogenation at AM1.5. This increase in efficiency is probably due to passivation of surface dangling bonds.     

SPECTROSCOPIC CHARACTERIZATION OF SOLVENT SOLUBLE FRACTIONS OF PETROLEUM VACUUM RESIDUES

ABSTRACT

NMR and FTIR spectroscopic techniques were used to investigate the effect of different solvent extraction schemes on the composition and chemical nature of species of vacuum residues of two Indian crude oils (namely Jodhpur and Heera) extractable into polar (ethyl acetate) and non-polar (n-pentane and n-heptane) solvents. The obtained soluble fractions were found to consist of mainly simple aliphatic and naphthenic ring structures, while insoluble fractions consisted primarily aromatic compounds. The results were used to draw inferences on the relative utility of different extraction schemes to upgrade vacuum residues as feedstocks for secondary conversion processes in petroleum industry.     

三轴感应电阻率测井新技术

一种新型感应电阻率测井仪器能够提供远离井筒地层的三维信息,提高斜井和倾斜地层的电阻率测量精度,而且不需要接触井壁就能够直接测量地层倾角大小和方位。采用这种高精度三轴电阻率测井仪器可以减少漏掉油气层的机会,加强对储层的认识。