Multi-step Training of a Generalized Linear Classifier

Neural Processing Letters - We propose a multi-step training method for designing generalized linear classifiers. First, an initial multi-class linear classifier is found through regression. Then...     

Mechanical and thermal behaviour of biodegradable composites based on polycaprolactone with pine cone particle

Polycaprolactone (PCL) was reinforced with natural fibres as they not only permit a substantial reduction of the material costs, but also play a role as reinforcement in mechanical properties. This work was focused on the estimation of mechanical and thermal behaviour based on PCL and Pine Cone particles (PCP) filler at different weight percentages (0, 5, 10, 15, 30 and 45 wt%). Tests results indicated considerable improvement in mechanical properties, corresponding to a gain in impact strength and % elongation of 6 and 9.2% at 15 wt% particle loading, respectively. Some decrease in thermal stability was observed for composites with increasing filler content where as composite at 15% PCP was not significantly affected. Lower melting and crystallization enthalpies and higher crystallinity values were obtained for bio-composites compared with neat PCL. Some decrease in thermal stability and increase in oxygen and water vapour barrier properties were also observed for composites with increasing filler content.     

Assessment of integrated binary process by coupling photocatalysis and photo-Fenton for the removal of cephalexin from aqueous solution

A novel concept of integrated process by coupling photocatalysis and photo-Fenton especially in fixed mode has been presented in the current study for the removal of recalcitrant pharmaceuticals like cephalexin (CEX) from aqueous solution in reduced treatment time. Waste materials like foundry sand (FS) was used as a substitute for iron along with TiO₂. The parametric optimization was carried out in slurry mode using Box–Behnken design model (BBD) and response surface methodology. For fixed-bed studies, support materials of varying shapes (hollow circular disk, rectangular slabs, spherical beads) were prepared using clay in conjunction with FS for TiO₂ immobilization. Different supports were compared on the basis of degradation efficiency, exposed surface area of catalyst as well as their recyclability capacity for the degradation of CEX. Iron was leaching by default from the supports during the degradation process which contributed simultaneously to photo-Fenton process along with photocatalysis. Spherical beads with 0.0265 m² exposed surface area of catalyst and better recyclability efficiency (10 cycles) yielded best degradation efficiency (80%) of CEX after 240 min of treatment time. The presence of iron along with TiO₂ on the surface of beads was confirmed through TGA, SEM/EDS, XRD, DRS and FTIR. The mineralization of CEX was validated through quantification of nitrite, nitrate and sulfate ions along with reduction in COD. A tentative pathway for the degradation of CEX was also proposed based on the identification of intermediates through GC–MS analysis.     

Engineering the Interlayer Spacing by Pre-Intercalation for High Performance Supercapacitor MXene Electrodes in Room Temperature Ionic Liquid

MXenes exhibit excellent capacitance at high scan rates in sulfuric acid aqueous electrolytes, but the narrow potential window of aqueous electrolytes limits the energy density. Organic electrolytes and room-temperature ionic liquids (RTILs) can provide higher potential windows, leading to higher energy density. The large cation size of RTIL hinders its intercalation in-between the layers of MXene limiting the specific capacitance in comparison to aqueous electrolytes. In this work, different chain lengths alkylammonium (AA) cations are intercalated into Ti₃C₂T_x, producing variation of MXene interlayer spacings (d-spacing). AA-cation-intercalated Ti₃C₂T_x (AA-Ti₃C₂), exhibits higher specific capacitances, and cycling stabilities than pristine Ti₃C₂T_x in 1 m 1-ethly-3-methylimidazolium bis-(trifluoromethylsulfonyl)-imide (EMIMTFSI) in acetonitrile and neat EMIMTFSI RTIL electrolytes. Pre-intercalated MXene with an interlayer spacing of ≈2.2 nm, can deliver a large specific capacitance of 257 F g⁻¹ (1428 mF cm⁻² and 492 F cm⁻³) in neat EMIMTFSI electrolyte leading to high energy density. Quasi elastic neutron scattering and electrochemical impedance spectroscopy are used to study the dynamics of confined RTIL in pre-intercalated MXene. Molecular dynamics simulations suggest significant differences in the structures of RTIL ions and AA cations inside the Ti₃C₂T_x interlayer, providing insights into the differences in the observed electrochemical behavior.     

A Hybrid Genetic Algorithm and Back-Propagation Classifier for Gearbox Fault Diagnosis

An Artificial Neural Network (ANN) classifier trained by a hybrid GA-BP method for diagnosis of gear faults is presented here that can be incorporated in an online fault diagnostic system of vital gearboxes. The distinctive features obtained from vibration signals of a running gearbox; that was operated in normal and with faults induced conditions were used to feed the GA-BP hybrid classifier. Time domain vibration signals were divided in 40segments. From each segment features such as magnitude of peaks in time domain and spectrum along with statistical features such as central moments and standard deviations were extracted to feed the classifier. Based on the experimental results it was shown that the GA-BP hybrid classifier can successfully identify gear condition. It was also shown that the network trained by GA-BP hybrid method performs much better than ANN that is trained by standard BP or GA individually. Further, it was also shown that if prior to extraction of features; the vibration signals are pre-processed by Discrete Wavelet Transform (DWT) then efficacy of the GA-BP hybrid is significantly enhanced.     

Phase‐dependent radiation‐resistant behavior of BaTiO3: An in situ X‐ray diffraction study

The radiation‐resistant response of BaTiO₃ in the tetragonal and rhombohedral phases on exposure to 100 MeV Ag⁷⁺ ion irradiation was investigated by in situ X‐ray diffraction (XRD) at room temperature (300 K) and low temperature (25 K), respectively. This study revealed that the BaTiO₃ in rhombohedral phase retained crystallinity up to an ion fluence of 1×10¹⁴ ions/cm², whereas tetragonal phase amorphized at much lower fluence viz. 1×10¹³ ions/cm². The in situ XRD along with Raman spectroscopy studies revealed that BaTiO₃ in rhombohedral phase is more radiation resistant than that of tetragonal phase. The density functional theory (DFT) calculations confirmed higher bond strength of rhombohedral phase as compared to tetragonal phase, which supported the experimental result of higher radiation stability of rhombohedral phase. The theoretical predictions on high‐temperature phase will be of relevance to the nuclear waste applications.     

Bioleaching of metals from sewage sludge: Microorganisms and growth kinetics

Microbial leaching is one of the advantageous methods of removing heavy metals from sewage sludge, however, the microbiological aspects of this technology have not been studied. This study presents the characterization of the naturally occurring microorganisms, responsible for the metal leaching activity, in 21 different sewage sludges. The results obtained indicate that the bioleaching of metals is carried out by successive growth of less-acidophilic and acidophilic thiobacilli. Several species of less-acidophilic thiobacilli participate in the sludge acidification, but Thiobacillus thioparus is the most important species. In contrast, Thiobacillus thiooxidans seems to be the only species involved in the acidophilic group of thiobacilli. The growth kinetics of the two groups of thiobaciili was followed in five different sewage sludges. After 5 days of incubation in shake flasks, the pH of the sludge was decreased to about 2.0 and this pH decrease solubilized the toxic metals (Cd: 83–90%; Cr: 19–41%; Cu: 69–92%; Mn: 88–99%; Ni: 77–88%; Pb: 10–54%; Zn: 88–97%). The maximum specific growth rate (μ_max) for the less-acidophilic thiobacilli varied between 0.079 and 0.104 h⁻¹ and that for the acidophilic thiobacilli varied between 0.067 and 0.079 h⁻¹.     

Performance of ceramic-block fire stops for power cable installations

Fire losses due to cable fire in thermal power plants and industrial units are mounting. Fire in cable galleries is caused either by an external source or internal heating due to overloading or poor cable insulation. Most of the power cables are laid in groups that run on trays. In the event of fire, cable insulation melts and cable conductors come into contact and generate sparks. The resulting flame spreads through cables and engulf other groups of cables. This leads to damage in control rooms and distribution units that causes power generation disruption and plant shutdown.To minimize the damage and system disturbance due to fire, a new system for cable installation has been developed. The system involves construction of fire stop walls using fire-resistant cavity blocks, heat-resistant wool, and fire-resistant sealant.     

Kinetics of heavy metal bioleaching from sewage sludge—II. Mathematical model

A conceptual model of the overall process of metal bioleaching from sewage sludge has been developed on the basis of experimental observations. Sludge pH was identified as the parameter which controls bacterial growth and thus the overall process. Quantitative relationships among the various process parameters were incorporated in the conceptual model, giving a mathematical model for the process. Bacterial growth, sulfate concentration and pH profiles simulated using the model were found to match experimental observations. The degree of solubilization of each metal was found to depend on the sludge pH and the type of the sludge and is given as a set of solubilization curves.     

Optical and mechanical properties of diamond like carbon films deposited by microwave ECR plasma CVD

Diamond like carbon (DLC) films were deposited on Si (111) substrates by microwave electron cyclotron resonance (ECR) plasma chemical vapour deposition (CVD) process using plasma of argon and methane gases. During deposition, a d.c. self-bias was applied to the substrates by application of 13·56 MHz rf power. DLC films deposited at three different bias voltages (−60 V, −100 V and −150 V) were characterized by FTIR, Raman spectroscopy and spectroscopic ellipsometry to study the variation in the bonding and optical properties of the deposited coatings with process parameters. The mechanical properties such as hardness and elastic modulus were measured by load depth sensing indentation technique. The DLC film deposited at −100 V bias exhibit high hardness (∼ 19 GPa), high elastic modulus (∼ 160 GPa) and high refractive index (∼ 2·16–2·26) as compared to films deposited at −60 V and −150 V substrate bias. This study clearly shows the significance of substrate bias in controlling the optical and mechanical properties of DLC films.