二(二甲苯基)丙烷合成工艺的研究

二氯丙烷(DCP)与二甲苯在混合金属氯化物催化剂(HD90)作用下合成二(二甲苯基)丙烷,生产过程简单,产品收率高。在60—80℃的温度下,二甲苯与二氯丙烷摩尔比为6∶1,HD用量50克/摩尔DCP的条件下反应5—6小时,二(二甲苯基)丙烷的收率可达88％以上。     

壳聚糖醇水分离膜的研究

本文制备了一系列不同脱乙酰度壳聚糖，研究了不同脱乙酰度聚糖膜的醇水分离性能，结果表明，随着脱乙酰度的增大，分离因子升高，渗透通量减小。当脱乙酰度大于９０％时，有较高的分离因子，符合单级分离要求。同时考察了料液浓度，料液温度等条件对壳聚糖膜醇水分离性能的影响，求得水和乙醇透过壳聚糖的表观活化能分别为：△Ｅｗ＝３２．６ｋＪ／ｍｏｌ，△Ｅｅ＝５７．２ｋＪ／ｍｏｌ。     

化学镀SiCp／Ni－P复合镀层与基体结合强度及其影响因素

论述了ＳｉＣｐ／Ｎｉ－Ｐ复合镀层与钢基体的结合强度及其影响因素。复合镀层中离界面５μｍ厚度以内区域的组成及应力状态对镀层／基体的界面结合有决定性作用，在该区域以外ＳｉＣ粒径变化不影响镀层的结合强度。适当的热处理可提高界面结合力。     

CT9800机器操作使用经验介绍

本文重点介绍了在进行CT断层X-线摄影时,如何灵活应用标准、软组织和骨结构等三种重建图像的软件,既能显著缩短图像重建的时间,又不会遗漏病变的影像。     

Performance of absorption refrigeration cycle at maximum cooling rate

The influence of irreversibility of finite-rate heat transfer on the performance of an absorption refrigerator is investigated using an endoreversible cycle model with continuous flow. The cooling rate is adopted as an objective function for refrigerator optimization. The maximum cooling rate and the corresponding coefficient of performance are derived. The optimal performance with respect to heat transfer areas of the refrigerator is analysed. In addition, certain significant conclusions are reached.     

�¹������������յ���״�뷢չ

吐哈油田在总结国内成功经验的基础上，立足先进适用，配套可靠，相继在鄯善、温米、丘陵三大油田建成了鄯善１０＃、鄯善３０＃、温米５０＃、丘陵１２０＃轻烃回收装置，形成了２１０×１０４ｍ３／ｄ的处理规模。根据吐哈油田天然气的物理性质、压力、外输压力要求，采用低温分离法。在轻烃回收发展过程中，经不断完善和改进，现已形成燃气引擎往复式压缩机；分子筛脱水；多股流冷箱换热；重烃逐级降压闪蒸提馏脱水技术；丙烷制冷；膨胀机制冷；导热油供热；ＤＨＸ工艺；屏蔽液烃泵；分布式集散控制系统和安全联锁控制１０项关键技术。     

Postoperative evaluation in mandibular prognathism treated by bilateral sagittal split osteotomy

The present study was undertaken to evaluate the postoperative relapse from the period of unwiring to 1 year postoperatively and its correlation to the amount of mandibular setback and change in vertical dimension after mandibular bilateral sagittal split osteotomy. Twenty-seven patients were evaluated cephalometrically by the time preoperatively, 6 weeks, 6 months and 1 year postoperatively. It was found that 1) the average amount of mandibular setback at pogonion point, 6 weeks postoperatively, is 7.6mm backward and 1.9mm downward, 2) the average amount of horizontal relapse at pogonion point, 6 months and 1 year postoperatively, are 1.9mm and 2.3mm respectively. 86% of the horizontal relapse, 1 year postoperatively, occurs in the first 6 months after removal of intermaxillary fixation, 3) the average amount of vertical relapse at pogonion point, 6 months and 1 year postoperatively, are 0.9mm and 1.1mm upward. 82% of the vertical relapse, 1 year postoperatively, occurs in the first 6 months after removal of intermaxillary fixation, 4) the amount of 1 year postoperatively horizontal relapse is significantly correlated both with the amount of horizontal mandibular set back and vertical downward change (r = 0.58, 0.67, p < 0.001), whereas the amount of vertical relapse is with the vertical downward change only, but horizontal setback isn't.