Influence of China‘s WTO Entry on Petroleum Taxation

China has formulated a series of preferential taxation policies for the country 's petroleum enterprises. Those state policies are the important factors influencing reform and development of petroleum enterprises. The taxes turned over to the State by CNPC in 1998, 1999 and 2000 are 31.4 billion yuan, 31.7 billion yuan and 41 billion yuan respectively, accounting for 11.64 percent, 9.06 percent and 10.15 percent of the annual sales income.With China 's entry into WTO, it is necessary for t…     

激光焊接超细基胎体金刚石薄壁钻

采用激光焊接超细预合金粉胎体，开发了新的薄壁钻产品，通过对与现有的产品工艺、性能测试以及实际使用分析对比，结果表明：激光焊接与普通钎焊相比结合强度提高2－3倍，克服了胎体脱落问题，胎体耐磨性提高了50％－120％，其中轴向磨损速率提高1．2倍；钻削速度提高30．4％，工矿适应性增加，使用寿命提高25％－108％。     

GEOCHEMICAL CHARACTERISTICS OF THE COAL－FORMED GASES IH THE EAST OF THE CENTRAL－ASIA COAL－FORMED GAS ACCUMULATION DOMAIN──SERIES STUDY Ⅱ ON THE CENTRAL－ASIA COAL－FORMED GAS ACCUMULATION DOMAIN

ＧＥＯＣＨＥＭＩＣＡＬＣＨＡＲＡＣＴＥＲＩＳＴＩＣＳＯＦＴＨＥＣＯＡＬ－ＦＯＲＭＥＤＧＡＳＥＳＩＨＴＨＥＥＡＳＴＯＦＴＨＥＣＥＮＴＲＡＬ－ＡＳＩＡＣＯＡＬ－ＦＯＲＭＥＤＧＡＳＡＣＣＵＭＵＬＡＴＩＯＮＤＯＭＡＩＮ──ＳＥＲＩＥＳＳＴＵＤＹⅡＯＮＴＨＥＣ...     

GTL 工艺技术评述

介绍了1990年以来GTL工艺技术开发的进展情况，其中以Sasol-SSPD和Syntruleum两种工艺最受关注，从现有数据分析。Syntruleum虽采用含氮合成气生产工艺，但并未使装置的单位投资明显改善，因此，近10年来GTL工艺技术开发虽取得了长足的进步，但其装置投资仍偏高，从而又严重影响了产品成本，按南非Sasol公司的经验。开展资源综合利用是降低液体燃料生产成本的有效途径，目前国外GTL工艺技术的开发仍很活跃，我国也已形成大量实验室成果。建议尽快组织力量完成工业性试验。     

计算机在热处理工艺编制中的应用

利用计算机强大的数据处理功能 ,对热处理工艺中的各种数据进行记录和处理 ,并制成各种图表 ,掌握其中的各种规律。使热处理工艺的编制不再是一种经验积累式的工作 ,而是依照其规律制定一次合格的规范的热处理工艺卡片 ,并为将来计算机工艺自动生成的工作打下基础     

The 2006 summary of scientific productivity of chemical engineers in Taiwan

In this report, the scientific productivity of Year 2006 of chemical engineering professionals in Taiwan was analyzed carefully with information retrieved from the database of the ISI Web of Science. The distributions of number of authors with x publication versus the number of publication x follows a general power-law trend, which coincidently comply with the Pareto distribution. The power-law indices found ranges from −1.64 to −2.22, which is consistent with values reported in the literature investigated for periods of 1907–1916 and 1969–2004.     

GaAs-GaAlAs heterostructure single-mode channel-waveguide cutoff modulator and modulator array

A GaAs single-mode channel-waveguide cutoff modulator that utilizes a GaAs-GaAlAs heterostructure and a linear array of such modulators are reported for the first time. We have measured a cutoff voltage as low as 9.0 V and an extinction ratio greater than 20 dB at an optical wavelength of 1.3 μm in a basic modulator that utilized a GaAs-Ga0.93Al0.07As heterostructure with a 0.9 μm thick GaAs epitaxial layer together with a ridge channel 2.5 mm in length and 5.0 μm in width. We have also succeeded in the realization of a high packing density (500 channels/cm) linear array of such cutoff modulators in the same GaAs substrate with equally satisfactory results. An RF bandwidth of 2.5 GHz has also been measured with the elementary modulator of such array. As in the case for LiNbO3substrates, the GaAs-based integrated optic modules that result from integration of such cutoff modulator arrays, microlens arrays, and planar acoustooptic or electrooptic Bragg diffraction grating arrays in a common substrate may be used to perform multiport switching, computing, and RF signal processing.     

水轮发电机槽楔处理的几个技术问题

水轮发电机定子槽楔处理是定子检修的关键环节,关系到定子检修质量的主要工序,在长期的、多台次的、不同机型的水轮发电机定子槽楔处理工作中,经过不断分析,对槽楔处理的技术问题进行了探讨。