Preparation and self‐assembly of poly(diglycidyl maleate‐co‐stearyl methacrylate)

Poly(diglycidyl maleate‐co‐stearyl methacrylate) (P(DGMA‐co‐SMA)) with reactive epoxy groups was synthesized by reaction of poly(maleic anhydride‐co‐stearyl methacrylate) (P(MA‐co‐SMA)) and epichlorohydrin. The effect of precipitant on self‐assembly behaviors of the resultant copolymer was investigated. It was found that vesicles and nanotubule liked aggregates can be obtained through self‐assembly of P(DGMA‐co‐SMA) in THF solution using CH₃CH₂OH (EtOH) as precipitant while spheral aggregates can be obtained using H₂O as precipitant. The mechanism of the self‐assembly behavior was discussed. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

多菌灵·硫·三环唑混配对抑制水稻稻瘟病菌和纹枯病菌的协同增效作用

多菌灵、硫及三环唑混配成悬浮剂,对抑制稻瘟病菌的菌丝生长、分生孢子萌发、附着胞的形成、产孢能力及纹枯病菌菌丝生长等都具有较明显的协同增效作用,协同作用比率(SR)分别为1.64、5.58、4.30、1.81及1.73。混配剂集合了多菌灵、硫及三环唑的优点,并显示出耐雨水冲刷、持效期长的特点。田间试验亦表明其防病增产作用比较显著。     

腐植酸类液体肥料生产技术和产品质量中的几个问题

本文通过胶体化学基本原理和实验数据，对水剂型腐植酸类液体肥料的组分、性质、浓度、流动性、稳定性、抗絮凝性等若干技术和质量问题进行了探讨，并提出一些改进建议。     

Crosslinking of cotton cellulose in the presence of alkyl diallyl ammonium salts. I. Physical properties and agent distribution

We used three kinds of alkyl diallyl ammonium salts (methyl, ethyl, and propyl) in combination with dimethyloldihydroxyethyleneurea (DMDHEU) as crosslinking agents. The nitrogen content, dry crease recovery angle (DCRA), moisture regain, and wicking height for the DMDHEU/alkyl diallyl ammonium salts were in the order of ? CH₃ > ? C₂H₅ > ? C₃H₇, but the wet crease recovery angle (WCRA) and tensile strength retention (TSR) were in the opposite order at the same resin concentration. For the same DCRA and TSR, the WCRA values for only DMDHEU were lower than those for DMDHEU/alkyl diallyl ammonium salts, and the WCRA values for DMDHEU/alkyl diallyl ammonium salts were in the order of ? C₃H₇ > ? C₂H₅ > ? CH₃. Both the ? OH group of the cellulose and DMDHEU could react with the vinyl or epoxy groups of the alkyl diallyl ammonium salts during the pad–dry–cure process. The surface migration for DMDHEU/alkyl diallyl ammonium salts was in the order of ? CH₃ > ? C₂H₅ > ? C₃H₇. Fabrics treated with DMDHEU/alkyl diallyl ammonium salts showed good antibacterial properties. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 1662–1669, 2003     

中央空调制冷机的化学清洗

阐述了中央空调制冷机结垢的类型及其产生的原因和危害,分析了中央空调制冷机的冷媒水系统、冷却水系统的化学清洗技术和操作方法.     

超快平面显微成像技术

快速成像技术在很多领域都有着重要的应用,本文基于超短光脉冲的时-空-频映射原理,提出并实现了一种超快平面显微成像技术。利用色散傅里叶变换及空间色散器件把光脉冲的宽带频谱信息分别映射到时域和空域,利用高速光电探测器进行串行单像素成像,最终获得了帧速率为20.9 MHz,空间分辨率为22 μm和55 μm的一维及二维平面成像系统。在实验中用标准的分辨率目标板验证了成像效果。该技术为超快成像提供了一种有效手段,并将应用于高速平面检测等多个领域。     

Gamma‐ray irradiation effect of polyethylene on dimaleimides as a class of new multifunctional monomers

Multifunctional monomers, m‐xylylenedimaleimide, p‐phenylenedimaleimide, m‐phenylenedimaleimide, and p‐phenylenedinadimide, all of which have maleimide groups, were synthesized to increase thermal and radiation stabilities. The synthesized multifunctional monomers showed good compatibility with low‐density polyethylene (LDPE). Mixtures of LDPE and these multifunctional monomers were irradiated with γ‐rays from a Co‐60 source at room temperature in a nitrogen atmosphere. The absorbed dose ranged from 0 to 160 KGy. Among these multifunctional monomers, m‐xylylenedimaleimide was the best in gel fraction enhancement. Crosslinked LDPE with m‐xylylenedimaleimide displayed a higher modulus than that of crosslinked LDPE with triallyl cyanurate. For the elongation property, LDPE with m‐xylylenedimaleimide as a multifunctional monomer showed better results than that with commercial multifunctional monomers such as triallyl cyanurate (TAC) and trimethylol propane triacrylate (TMPTA). © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 2339–2345, 2003     

浅议军事需求分析的规律和原则

军事需求分析有其自身活动的规律和原则,文章对军事需求分析的主要规律和原则进行了分析和总结,为从事军事需求分析的技术人员提供指导。     

催化湿式氧化处理农药废水的研究

利用担载型双金属活性组分催化剂，考察了反应温度、压力、进料空速和V（空气）：V（H2O）（体积比）等反应条件对催化湿式氧化处理某农药废水效果的影响。对于该种废水，在4．2MPa，245℃，空速为2．0h^-1，V（空气）：V（H2O）＝300的反应条件下，废水的COD去除率可达到91．3％。经处理后废水的BOD5／COD＞0．5，说明其可生化性能良好。     

FTIR光谱法原位快速跟踪不饱和聚酯树脂的固化反应

用富里哀变换红外光谱法原位跟踪不饱和聚酯树脂固化反应的动态过程。该方法能直接反映分子结构的变化,迅速准确地采集数据,尤其适用于快速反应体系。