Quantitation of intrathecal measles virus IgG antibody synthesis rate: subacute sclerosing panencephalitis and multiple sclerosis

A method for quantitating specific anti-viral antibodies in serum and cerebrospinal fluid (CSF) is established using enzyme-linked immunosorbent assay (ELISA). Quantitated antibody levels are used to determine intrathecal specific IgG synthesis rate for the particular antibody. Measles virus was used as a model for validating this quantitative technique: a mutated form of measles virus is a cause of subacute sclerosing panencephalitis (SSPE) and there is a possibility that measles virus is related to the cause of multiple sclerosis (MS). Matched serum and CSF samples were assayed. Concentration of anti-measles IgG was determined and intrathecal measles-specific IgG synthesis rate was calculated. For the SSPE samples, measles-specific IgG synthesis rate was elevated and comprised > 20% of the total intrathecal IgG synthesis rate; these results are consistent with the literature. The ELISA method can be performed routinely, providing a quick, simple, reproducible means of quantitating specific antibody concentrations, with sensitivity greater than 1 nanogram per milliliter. With this method, quantitation of IgG antibodies to any other viral antigen can be reliably and precisely determined.     

Demonstration of the Th1 to Th2 cytokine shift during the course of HIV-1 infection using cytoplasmic cytokine detection on single cell level by flow cytometry

OBJECTIVE: To characterize changes of Th1/Th2 cytokine production by peripheral blood mononuclear cells (PBMC) that occur during the course of HIV infection by cytoplasmic cytokine staining on single cell level. DESIGN AND METHODS: Mitogen-stimulated PBMC from 16 healthy donors, 18 HIV-1-infected individuals without AIDS and 14 patients with AIDS were stained intracellularly with fluorescein-labelled MAb against interleukin (IL)-2, IL-4, IL-10 and interferon (IFN)-gamma. Additionally, co-staining of CD4+ T-cell, CD8+ T-cell, natural killer (NK) cell, B-cell and monocytic markers was performed. Fluorescence staining was analysed by three-colour flow-cytometry. RESULTS: A reduced percentage of IL-2 and IFN-gamma (Th1 type)-producing cells among CD4+ T cells from HIV-1-infected individuals could be demonstrated. There was a continuous decrease of IFN-gamma-producing CD4+ T cells in the course of HIV infection and a dramatic reduction of IL-2-expressing cells among CD4+ T cells in patients with AIDS. In contrast to Th1 cytokines, the frequency of Th2 cytokine expressing cells among CD4+ T cells increased in HIV-infected individuals. The maximum frequency of IL-4-expressing cells among CD4+ T cells was seen in HIV-infected individuals without AIDS, whereas the rate of IL-10-producing cells was highest in patients with AIDS. In HIV-infected individuals no significant proportion of Th0 cells expressing both Th1 and Th2 cytokines was detectable. In CD8+ T cells the percentage of IL-2 was expressing cells decreased continuously accompanied by a strong increase of the frequency of IFN-gamma-producing cells. CONCLUSION: The decreased percentage of cells expressing IL-2 and IFN-gamma in conjunction with an increased proportion of IL-4- and IL-10-producing cells among the CD4+ T cells in HIV-1-infected individuals demonstrate a Th1 to Th2 cytokine shift in the course of HIV infection on a single cell level. There was no evidence of a Th1 to Th0 cytokine shift. In addition to the loss of CD4+ T cells in HIV infection, the qualitative changes of Th1/Th2 cytokine expression may serve as a marker for progressive failure of cell-mediated immunity.     

Crack tip parameters and elastic-plastic fracture of metals

By using optical displacement-measuring techniques we obtain the crack tip fields in terms of crack tip strain, crack opening angle (COA) and crack tip opening angle (CTOA). Thin plates with different crack configurations made of six elastic-plastic materials with strain hardening exponent ranging from 3 to are studied. We find that the COA resistance curve assumes certain characteristics common to all the materials. The experimental results indicate that the critical value of COA may be used as a fracture toughness parameter for these materials.

---

Résumé En utilisant une technique de mesure optique des déplacements, on obtient les champs régnant à l'estrémité d'une entaille, qui s'experiment par la déformation d'extrémité d'entaille, l'angle d'ouverture de la crique (COA et l'angle d'ouverture de la pointe de la crique (CTOA). On étudie des feuillards présentant différentes configurations de fissures et réalisés en six matériaux élasto-plastiques dont les modules d'écrouissage s'échelonnent de 3 à l'infini.On trouve que la courbe de résistance COA suppose certaines caractéristiques communes à tous les matériaux. Les résultats expérimentaux indiquent que la valeur critique du COA peut être utilisée comme paramètre de ténacité à la rupture pour les matériaux étudiés.

     

Exploring latent browsing graph for question answering recommendation

In this paper, we develop a framework of Question Answering Pages (referred to as QA pages) recommendation. Our proposed framework consists of the two modules: the off-line module to determine the importance of QA pages and the on-line module for on-line QA page recommendation. In the off-line module, we claim that the importance of QA pages could be discovered from user click streams. If the QA pages are of higher importance, many users will click and spend their time on these QA pages. Moreover, the relevant relationships among QA pages are captured by the browsing behavior on these QA pages. As such, we exploit user click streams to model the browsing behavior among QA pages as QA browsing graph structures. The importance of QA pages is derived from our proposed QA browsing graph structures. However, we observe that the QA browsing graph is sparse and that most of the QA pages do not link to other QA pages. This is referred to as a sparsity problem. To overcome this problem, we utilize the latent browsing relations among QA pages to build a QA Latent Browsing Graph. In light of QA latent browsing graph, the importance score of QA pages (referred to as Latent Browsing Rank) and the relevance score of QA pages (referred to as Latent Browsing Recommendation Rank) are proposed. These scores demonstrate the use of a QA latent browsing graph not only to determine the importance of QA pages but also to recommend QA pages. We conducted extensive empirical experiments on Yahoo! Asia Knowledge Plus to evaluate our proposed framework.     

HEAT TRANSFER IN PARTIALLY MISCIBLE TERNARY SYSTEMS

In the study of mass transfer between partially miscible liquids, temperature perturbations have been found to have an important effect in the generation of interfacial activity. Micro- and macro-generated interfacial convection usually occurs in combination with one another even in fairly simple heat or mass transfer events. These combinations are responsible for the enhancement of mass transfer rates. In an effort to acquire a better understanding of the heat transfer effects in ternary liquid-liquid systems, temperature difference profiles were measured when contacting two partially miscible phases. A vertical and a rotational transfer cell were designed to contact the partially miscible phases without inducing external disturbances. Five thermocouples were immersed in the bottom liquid phase at predetermined positions below the interface. In order to understand the influence of the convection generated, the vertical cell was designed to hinder convection in one phase, while the rotational cell permits convection in both phases. The experimental results showed larger temperature differences in the rotational cell after the contact of the phases. Also, systems which were initially unsaturated presented larger heat effects than those in which the partially miscible solvents were initially saturated. Several parameters indicating the importance of heat effects in the ternary systems studied are reported.     

Interaction‐Feature Enhanced Multiuser Model Learning for a Home Environment Using Ambient Sensors

Activity recognition (AR) is a key enabler for a context‐aware smart home since knowing what the residents’ current activities helps a smart home provide more desirable services. This is why AR is often used in assistive technologies for cognitively impaired people to evaluate their abilities to undertake activities of daily living. In a real‐life scenario, multiple‐resident AR has been considered as a very challenging problem, primarily due to the complexity of data association. In addition, most prior research has not considered the potential interpersonal interactions among residents to simplify complexity, especially in an environment monitored by ambient sensors. In this study, we propose two types of multiuser activity models, both of which are derived from an interaction‐feature enhanced multiuser model learning framework. These two models consider interpersonal interactions and data association for multiuser AR using ambient sensors. We then compare their performance with the other two baseline models with or without consideration of data association and interpersonal interactions. The experimental results show that the derived models outperform other baseline classifiers. Therefore, the proposed approach can increase the opportunities for providing context‐aware services for a multiresident smart home.     

Properties of polycarbonate/acrylonitrile-butadiene-styrene blends

To help make a good polymer blend by melt blending, the properties of polycarbonate (PC)/acrylonitrile-butadiene-styrene (ABS) systems with various compositions have been investigated. As ABS is blended into PC to form a binary system, Brabender torque is reduced, a phenomenon that results in Improved processability of PC. With increasing ABS content, the mechanical properties of the blends such as tensile strength, modulus, hardness, and shrinkage decrease. However, with the variation of composition, Izod impact strength shows a maximum, while elongation at break exhibits a minimum. These phenomena are discussed with dynamic viscoelasticities and scanning electron microscopic morphological results. The value of ΔT_g(T_gβPC ? T_gβABS) is at its smallest when the ratio of PC to ABS is 90:10, However, the value rises with an increase in ABS because the butadiene content of the ABS hinders compatibility in the binary system. At the 90:10 composition, the damping height is optimal. In addition, the dispersed phase of the ABS is most ideal, absorbing the impact force and showing high impact strength. Composition ratios other than 90:10 present high damping as well as undesirable phase separation because of poor adhesion between two phases. As a result, the mechanical properties are reduced.     

Annular ring slot antenna design with reconfigurable polarization

A microstrip‐fed conventional annular ring slot (ARS) antenna with linear polarization (LP) is initially studied. To generate two orthogonal degenerate modes for circular polarization (CP) radiations, two identical meandering perturbation slots (MPS) are symmetrically loaded into the ARS. By further incorporating a PIN diode switch across each MPS, the proposed antenna can switch between left‐hand CP (LHCP), right‐hand CP (RHCP), and LP. All three polarizations have shown good impedance bandwidth and broad CP bandwidth that can satisfy the wireless local area network (WLAN) 2.4‐GHz operating band (2400–2480 MHz). Furthermore, desirable gains of 1.8–2.0 dBi and 2.40–2.84 dBic are also exhibited at LP and LHCP/RHCP, respectively. © 2015 Wiley Periodicals, Inc. Int J RF and Microwave CAE 26:110–120, 2016.     

A sensor-based feet motion recognition of graphical user interface controls

Motion sensing has now become one of the crucial parts of modern life. The tech products for entertainment create huge competition in the modern market, with the front runners such as game and handset manufacturers. Users can use their own bodies to control the systems without Conversational User Interfaces (CUIs) and Graph User Interfaces (GUIs). With many benefits, the technologies of NUI is getting more and more important, which also are usually accompanied by the sensor developments. Hence, system designers uses the sensors on the embedded platforms used to develop the system devices for different body movement control interfaces, such as using the gravitational sensor to control the systems or using touchscreen detection. However most of the body movement is restricted to the hand portion for the system platform, making it not as dynamic as the traditional monitor consoles. Thus, this restriction decreases the multitude and availability of controlling modes in system devices. In this study, a sensor-based gait recognition was proposed, in order to provide a novel natural user interface for control systems except the operating modes of gesture.