Photoconductivity of DLC film deposited by pulsed discharge plasma CVD

DLC films were deposited by a new pulsed DC discharge plasma chemical vapour deposition (CVD) using hydrogen and methane gas mixture. When methane concentration (Cm) i.e. CH₄/(H₂ + CH₄) was increased from 3 to 40%, the graphitization of the carbon film increases as evident from Raman study. When Cm was increased to 30%, DLC film shows photoconducting property. The white light photoconductivity (S = I_l/I_d, where I_l is light current and I_d is dark current) measured with solar simulator under AM 1.5 condition was approximately 20 at room temperature. The photoconductivity was not clear when Cm was lower than 20%. ESR measurements also show that the electron spin density was slightly decreased with decreasing concentration of methane. Thus we can conclude here that at higher concentrations of methane at 30%, Sp² content of the film increases and the DLC film becomes photoconducting.     

A formalization for the specification and systematic generation of computer graphics systems

A formalization of graphical processes in computer graphics systems is presented in terms of functions and their system of axioms. The concept of the viewing pipeline is formalized as operation sequence which is a sequential composition of graphical elementary operations. The formalization includes two kinds of operation sequences which are used as the formal specifications of graphics systems and display devices. In order to generate a graphics system using a display device, we introduced the concept of functionality-preserving transformation of operation sequences in terms of various types of commutations among primitive operations. A type of transformation, which is called extraction, plays a central role in the generation algorithm.     

Simultaneous single-frequency oscillations on different transitionsand antiphase relaxation oscillation dynamics in laser-diode-pumpedmicrochip LiNdP4O12 lasers

Simultaneous single-frequency oscillations on different transitions have been observed experimentally in a laser-diode-pumped microchip LiNdP₄O₁₂ laser. The peculiar modal input-output characteristics and the antiphase relaxation oscillation dynamics have been reproduced theoretically using rate equations, including the strong spatial localization of population inversions, cross saturation, and resonant reabsorption loss in an unpumped region brought about by the inherent high Nd concentrations     

Interfacial microstructure and strength of steel/aluminum alloy joints welded by resistance spot welding with cover plate

We joined aluminum alloy A5052 to cold-rolled steel SPCC (Steel Plate Cold Commercial) and austenitic stainless steel SUS304 using resistance spot welding with a cover plate. The interfacial microstructure was observed using transmission electron microscopy. A thick two-layered reaction layer contains Fe₂Al₅ and FeAl₃ and a thin serration reaction layer contains Fe₂Al₅ and FeAl₃ were observed at the A5052/SPCC and A5052/SUS304 interface, respectively. Mechanical property analysis suggested that the reaction layer has no effect on the tensile shear strength of the A5052/SUS304 joint and that the tensile shear strength of the A5052/SPCC joint is influenced by the reaction layer formed at its interface.     

Mobility and distribution of cadmium, nickel and zinc in contaminated soil profiles from Bangladesh

We investigated the mobility and distribution of cadmium (Cd), nickel (Ni) and zinc (Zn) in four contaminated soil profiles from Bangladesh. The sources of contamination of these profiles were tannery wastes, city sewage and the wastes of pharmaceutical and paper mill factories at different locations in Bangladesh. The samples were collected from the A-, B- and C-horizons of each profile: two sub-samples from the A-horizon at depths of 0–5 cm (A1) and >5 cm (A2), and one sample each from the B- and C-horizons. Soil samples were analysed for total metal content by dissolution in aqua regia followed by sequential extraction of the fractions based on their varying solubility. There were six operationally defined groups of extraction sequences: water soluble (F1), exchangeable (F2), carbonate (F3), oxide (F4), organic (F5) and residual (F6). The total concentration of Cd, Ni and Zn in the A-horizon (0–5 cm) ranged from 0.10 to 0.62, from 31 to 54 and from 85 to 838 mg kg⁻¹, respectively. In the B- and C-horizons, the concentrations of these metals decreased many fold, particularly in the city sewage profile where the decrease for Cd and Zn was approximately fourfold. The distribution of metals among the chemical fractions depended on their total concentrations. In the A1-horizon, Cd had the highest mobility factor [MF = (F1+F2+F3)/(F1+F2+F3+F4+F5+F6) × 100] at 41–43% and Ni had the lowest at 3–13%, while Zn, showed intermediate values at 8–25%. The MF decreased with depth in all soil profiles. Among the fractions, the residual fraction contained the lowest levels of Cd but the highest levels of Ni and Zn. This state affected their relative mobility and distribution in soil profiles. Of the soil profiles, the mobility of all metals was higher in the city sewage soil than in any of the other three soils investigated, suggesting that the former may create a health risk by contaminating agricultural products and ground water as it also contained higher amounts of Cd and Zn.     

Towards a local learning (innovation) model of solar photovoltaic deployment

It is by now familiar that in the deployment of solar photovoltaic (PV) systems, the cost dynamics of major system component like solar cell/module is subjected to experience curve effects driven by production learning and research and development at the supplier side. What is less clear, however, is the economics of system integration or system deployment that takes place locally close to the user, involving other market players, in the downstream solar PV value chain. Experts have agreed that suppliers of solar PV system must customize their flexible characteristics to address local unique users’ and applications requirements and compete on price/performance basis. A lack of understanding of the drivers of the economics of system customization therefore is a deficiency in our understanding of the overall economics of this renewable energy technology option.     

Feasibility of using U to reconstruct close-in fallout deposition from the Hiroshima atomic bomb

The first results on the feasibility of using ²³⁶U to reconstruct the level and spatial distribution of close-in fallout deposition from the Hiroshima A-bomb are reported, coupled with the use of global fallout ¹³⁷Cs and ^239 + 240Pu. The results for global fallout ²³⁶U in soil samples (0-30 cm) from Ishikawa prefecture showed that the deposition density of ²³⁶U from the global fallout can be accurately evaluated using AMS. All deposited ²³⁶U, ¹³⁷Cs and ^239 + 240Pu appeared to have been recovered using 30-cm cores. It was also noted from the depth profiles for ²³⁶U/^239 + 240Pu and ²³⁶U/¹³⁷Cs ratios that the downward behavior of ²³⁶U in the soil was apparently similar to that of ^239 + 240Pu, while the ¹³⁷Cs was liable to be retained in upper layers compared with ²³⁶U and ^239 + 240Pu. The accumulated levels were 1.78 × 10¹³ atoms m^− 2 for ²³⁶U, 4340 Bq m^− 2 for ¹³⁷Cs and 141 Bq m^− 2 for ^239 + 240Pu. The ratios of ²³⁶U/¹³⁷Cs and ²³⁶U/^239 + 240Pu were (4.10 ± 0.12) × 10⁹ and (1.26 ± 0.04) × 10¹¹ atoms Bq^− 1, respectively. Results of ²³⁶U, ¹³⁷Cs and ^239 + 240Pu measurements for the seven soil cores (0-30 cm) from Hiroshima were discussed on the basis of ratios of ²³⁶U/¹³⁷Cs and ²³⁶U/^239 + 240Pu by comparing with those from the background area in Ishikawa, indicating that the global fallout dominates the current level of ²³⁶U accumulation in soil in the Black-rain area around Hiroshima after the Hiroshima bomb, and the contribution of the close-in fallout ²³⁶U produced by the Hiroshima A-bomb seems difficult to observe.