The PBD-Closure of Constant-Composition Codes

We show an interesting pairwise balanced design (PBD)-closure result for the set of lengths of constant-composition codes whose distance and size meet certain conditions. A consequence of this PBD-closure result is that the size of optimal constant-composition codes can be determined for infinite families of parameter sets from just a single example of an optimal code. As an application, the sizes of several infinite families of optimal constant-composition codes are derived. In particular, the problem of determining the size of optimal constant-composition codes having distance four and weight three is solved for all lengths sufficiently large. This problem was previously unresolved for odd lengths, except for lengths seven and eleven.     

An extraction method to determine interconnect parasitic parameters

Interconnect parasitic parameters in integrated circuits have significant impact on circuit speed. An accurate monitoring of these parameters can help to improve interconnect performance during process development, provide information for circuit design, or give useful reference for circuit failure analysis. Existing extraction methods either are destructive (such as SEM measurement) or can determine only partial parasitic parameters (such as large capacitor measurement). In this paper, we present a new method for extracting interconnect parasitic parameters, which can simultaneously determine the interlayer and intralayer capacitances, line resistance, and effective line width. The method is based on two test patterns of the same structure with different dimensions. The structure consumes less wafer area than existing methods. The method shows good agreement with SEM measurement of dielectric thickness in both nonglobal planarized and chemical-mechanical polished processes, and gives accurate prediction of the process spread of a ring oscillator speed over a wafer     

Time series modeling and spectrum analysis for chatter mode in endmilling dynamics

To analyze the chatter mechanics, the power spectrum of a time series method was analyzed by considering cutting and structural dynamics. In this study, several time series models such as AR (burg, least square, yule walker, geometric lattice, instrument variable), ARX (arx, iv4), ARMAX, ARMA, Box Jenkins, Output Error were modeled and compared with one another. Finally, it was proved that arx, armax and iv4 are more desirable and reliable algorithms than the others for the calculation of the chatter mode in the endmilling operation. The cutting forces Fx and Fz have more powerful effects on the chatter than Fy in the sense that there is no shifting or pseudo mode in the power spectrum.     

Preparation and properties ofgem-dichlorocyclopropane derivatives of long-chain fatty esters

Methyl oleate (18∶1) and linoleate (18∶2) were readily transformed to the correspondinggem-dichlorocyclopropane derivatives in high yield, using triethylbenzylammonium chloride as the phase-transfer catalyst in the presence of aqueous NaOH and CHCl₃. Reaction of dichlorocarbene with methyl 12-hydroxystearate furnished methyl 12-chlorostearate (49%) and 12-O-formylstearate (19%). The hydroxy group in methyl ricinoleate was protected (O-tetrahydropyran-2′-yl) prior to dichlorocyclopropanation of the ethylenic bond. Removal of the protecting group allowed the hydroxy group to be converted to a chloride,O-acetyl, azido orO-formyl function. Treatment of methyl ricinoleate with thionyl chloride, followed by the reaction with dichlorocarbene gave the corresponding 12-chloro-dichlorocyclopropane derivative. The dichlorocyclopropane derivative of oleic acid was transformed to a C₁₉ allenic fatty acid when treated witht-butyl lithium. However, the remaining dichlorocyclopropane derivatives, containing an additional functional group in the alkyl chain, failed to yield the corresponding allenic derivatives. All derivatives were characterized by a combination of spectroscopic and chromatographic techniques, including infrared,¹H nuclear magnetic resonance (NMR), and¹³C NMR spectroscopy.     

SHARED: An information model for cooperative product development

One fundamental issue in developing collaborative engineering systems is the representation of product information which supports communication and coordination. This product information includes not only the geometric and physical properties of the product and its parts, but also information about functions, constraints and the design rationale. In this paper, we describe an information model, SHARED, which was developed for encoding product information in DICE, a distributed and integrated environment for computer-aided engineering. SHARED provides multiple levels of both functional and geometric abstractions, multiple views and techniques for maintaining consistency between the various abstractions and views. These elements are essential for a good representation model of product information. The use of the SHARED model is illustrated through an example, depicting the various representations of a product as it evolves through the design process. The SHARED model has been implemented over a distributed OODBMS as a toolkit/framework for developing environments which need to model, manipulate and communicate product information between distributed cooperating applications, while supporting coordination between them.     

Effect of atherogenic diet on chicken plasma lipids and lipoproteins

Adult male White Leghorn chickens were used in an experimental model system to study atherogenesis, and the effects of an atherogenic diet on plasma lipoprotein composition including carotenoids were determined. This model also included treatment with diazepam, a drug known to reduce formation of atherogenic plaques. After 6 wk consumption of a high-cholesterol, high-triglyceride diet, chickens had mean total plasma cholesterol, triglyceride, and carotenoid concentrations that were significantly increased over those from chicks that consumed the standard diet. Diazepam treatment had no significant effect on whole plasma concentrations of these lipids. Total body weight gain was unaffected by diet, but liver weight expressed as percentage of body weight was significantly increased in chickens that consumed the atherogenic diet. High density lipoprotein (HDL) and low density lipoprotein (LDL) fractions were isolated from plasma samples by ultracentrifugation. The atherogenic diet increased the carotenoid, cholesterol, and protein content of the LDL fractions but not the HDL fractions.     

A CMOS ratio-independent and gain-insensitive algorithmicanalog-to-digital converter

This paper describes the design of a CMOS capacitor-ratio-independent and gain-insensitive algorithmic analog-to-digital (A/D) converter. Using the fully differential switched-capacitor technique, the A/D converter is insensitive to capacitor-ratio accuracy as well as finite gain and offset voltage of operational amplifiers. The switch-induced error voltage becomes the only major error source, which is further suppressed by the fully differential structure. The proposed A/D converter is designed and fabricated by 0.8 μm double-poly double-metal CMOS technology. The op-amp gain is only 60 dB and no special layout care is done for capacitor matching. Experimental results have shown that 14-b resolution at the sampling frequency of 10 kHz can be achieved in the fabricated A/D converter. Thus it can be used in the applications which require low-cost high-resolution A/D conversion     

Recurrence and death in non-small cell lung carcinomas: a prognostic model using pathological parameters, microvessel count, and gene protein products

Optimized stent expansion by high-pressure inflations of oversized balloons has initially been derived from experience obtained with the Palmaz-Schatz stent, whereas there is little experience with this strategy in the Wallstent. By using this approach with quantitative coronary angiographic guidance, 20 Wallstents and 20 Palmaz-Schatz stents were implanted in 34 patients and consecutively examined by conventional two-dimensional (2D) intracoronary ultrasound (ICUS) and three-dimensional (3D) ICUS on the basis of the application of a pattern recognition algorithm. Ultrasound criteria of adequate stent expansion were defined as a complete apposition of the stent to the vessel wall, a stent symmetry index (SSI = minimum/maximum lumen diameter) > or = O.7, and a stent-reference lumen area ratio (SRR = Minimum intrastent lumen area/Average of proximal and distal reference lumen area) > or = O.8. In all cases a smooth angiographic lumen and a negative diameter stenosis, on the basis of a distal reference, was achieved. For the Wallstents ICUS showed a higher SSI (2D, 0.95 +/- 0.04 vs 0.85 +/- 0.09; p < 0.001; 3D, 0.90 +/- 0.09 vs 0.82 +/- 0.11, p < 0.05) and a lower SRR (2D, 0.66 +/- 0.12 vs 0.81 +/- 0.13, p < 0.005; 3D, 0.63 +/- 0.14 vs 0.74 +/- 0.15, p < 0.05) than for the Palmaz-Schatz stents. Ninety percent of failure in meeting these criteria resulted from a low SRR. The incidence of incomplete stent apposition (one in both stents) or SSI <0.7 was low and generally associated with an SRR <0.8. The Wallstents met the ICUS criteria less often (2D, 2(1O%) vs 10(50%), p < 0.01; 3D, 3(15%) vs 9(45%), p < 0.05), were significantly longer (35.1 +/- 7.7 mm and 14.3 +/- 3.3 mm, p < 0.0001), and generally demonstrated a larger vessel tapering, measured as proximal minus distal ICUS reference lumen area (1.33 +/- 2.91 mm2 vs 0.44 +/- 1.97 mm(2), not significant). Wallstents meeting the ICUS criteria, however, showed less vessel tapering (0.18 +/- 1.64 mm(2)). Thus optimized stent expansion was followed by excellent angiographic results for both Palmaz-Schatz and Wallstent. Although angiographic results and visual assessment of the ICUS examination suggested a good outcome, few Wallstents met the ICUS criteria in contrast to the Palmaz-Schatz stents. The low value of the SRR in the Wallstents is likely to be caused by vessel tapering, suggesting that this criterion may be unsuitable in assessing the adequacy of the expansion of relatively long stents such as the Wallstent.     

Theory of soliton stability in asynchronous modelocking

A new type of fiber laser modelocking is examined where a phase modulator is driven asynchronously with respect to a harmonic of the roundtrip cavity frequency. An asynchronous drive is able to produce high repetition rate (>1 GHz) soliton pulses that are shorter than the classic, active modelocking pulse width limit. It is shown that with a proper choice of fiber parameters, noise cleanup and soliton pulse shaping can be obtained using filtering and asynchronous phase modulation. Limits of asynchronous detuning are derived and a comparison with the parameters ranges for synchronous phase modulation is also presented     

One-year prevalence of psychiatric disorder in Ontarians 15 to 64 years of age

OBJECTIVE: To present the one-year prevalence of 14 psychiatric disorders in a community sample of Ontarians aged 15 to 64 years. METHOD: Data on psychiatric disorders were collected on 9953 respondents using the University of Michigan revision of the Composite International Diagnostic Interview (UM-CIDI). DSM-III-R criteria were used to define the psychiatric disorders. RESULTS: Almost 1 in 5 Ontarians (18.6%) had one or more of the disorders measured in the survey. Among 15-to 24-year-olds, 1 in 4 was affected. The distribution of individual disorders varied by sex and age. CONCLUSION: Because of the immense burden of suffering associated with psychiatric disorders, clinical and research efforts in this area should receive high priority within the health budget.