A study of global vs. local properties for maleic anhydride modified polypropylene nanocomposites

Nanoindentation of organomodified clay filled maleated polypropylene (MAPP) was investigated. The study aims to identify the relative increase in local stiffness in comparison to the increase in mechanical properties of the bulk in polypropylene-based nanocomposites. Such a study allows one to assess confined material property in addition to increased filler volume at the local scale. A mixture of highly intercalated and well exfoliated clay structures, when dispersed in MAPP matrix, was observed under transmission electron microscopy. The degree of exfoliation was found to increase with clay loading, which was attributed to the higher viscosity and mechanical shear forces during melt compounding. Instrumented indentation was performed on (1) clay aggregate supported by MAPP matrix, (2) clay-matrix boundary, and (3) the MAPP matrix. The clay aggregated region generally showed higher stiffness as compared to the matrix. And, the relative increase in indentation stiffness is substantially higher than the relative increase in tensile and compressive stiffnesses for clay reinforced systems. Polymer chain confinement and topological constraint appeared to be operative to enhance local stiffness in the clay aggregated region. Good correlation was, however, obtained between the change in macroscopic stiffness and the change in highly local indentation stiffness as a result of clay reinforcement.     

Fluor SOx净化工艺——为俄罗斯绿色环境开发的将SOx转化为元素硫的经济技术

Fluor公司开发的Fluor SOx净化工艺具有广泛多样的工艺布局，可以通过经济的方式定制脱除烟气中的有害组成。该工艺几乎能去除全部SOx并减少CO排放。Fluor SOx净化工艺的主要步骤已在多套工业装置中得到成功的证实。除技术可行、经济合理之外，Fluor SOx净化工艺不会产生任何有害副产物，也不会遇到与SOx有关的腐蚀问题。此外，该工艺生产高纯度可市售的元素硫。论述了Fluor SOx净化工艺的特征、技术和成本优势、设计和操作的简易性以及实施的便利性。     

Fluor SOx净化工艺--为俄罗斯绿色环境开发的将SO2转化为元素硫的经济技术

Fluor公司开发的Fluor SO_2净化工艺具有广泛多样的工艺布局,可以通过经济的方式定制脱除烟气中的有害组成。该工艺几乎能去除全部SO_2并减少CO排放。Fluor SO_x净化工艺的主要步骤已在多套工业装置中得到成功的证实。除技术可行、经济合理之外,Fluor SO_x净化工艺不会产生任何有害副产物,也不会遇到与SO_3 有关的腐蚀问题。此外,该工艺生产高纯度可市售的元素硫。论述了Fluor SO_x净化工艺的特征、技术和成本优势、设计和操作的简易性以及实施的便利性。     

Crosslinking of cotton cellulose in the presence of alkyl diallyl ammonium salts. I. Physical properties and agent distribution

We used three kinds of alkyl diallyl ammonium salts (methyl, ethyl, and propyl) in combination with dimethyloldihydroxyethyleneurea (DMDHEU) as crosslinking agents. The nitrogen content, dry crease recovery angle (DCRA), moisture regain, and wicking height for the DMDHEU/alkyl diallyl ammonium salts were in the order of ? CH₃ > ? C₂H₅ > ? C₃H₇, but the wet crease recovery angle (WCRA) and tensile strength retention (TSR) were in the opposite order at the same resin concentration. For the same DCRA and TSR, the WCRA values for only DMDHEU were lower than those for DMDHEU/alkyl diallyl ammonium salts, and the WCRA values for DMDHEU/alkyl diallyl ammonium salts were in the order of ? C₃H₇ > ? C₂H₅ > ? CH₃. Both the ? OH group of the cellulose and DMDHEU could react with the vinyl or epoxy groups of the alkyl diallyl ammonium salts during the pad–dry–cure process. The surface migration for DMDHEU/alkyl diallyl ammonium salts was in the order of ? CH₃ > ? C₂H₅ > ? C₃H₇. Fabrics treated with DMDHEU/alkyl diallyl ammonium salts showed good antibacterial properties. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 1662–1669, 2003     

Modification of a carbon/carbon composite with a thermosetting resin precursor as a matrix by the addition of carbon black

Carbon/carbon composites were made through the pyrolysis of stabilized PAN felt and phenolic resin with the addition of 5 or 10 wt % carbon black to the matrix and then heat treatment at 600–2500°C. The effects of adding carbon black to the matrix precursor on the physical properties, microstructure, and mechanical properties of the resultant composites were investigated. Adding carbon black not only reduced the weight loss but also limited the shrinkage of the resultant composites. Adding carbon black also accelerated the formation of carbon basal planes in the matrix. At 2500°C, the crystalline stacking height in the composite with 10 wt % added carbon black was 200% greater than that with no additive. The flexural strength of the composite also increased from 15 to 42 MPa (almost 300%). © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 333–337, 2006     

Physical properties of polycaproamide/cationic dyeable poly(ethylene terephthalate) polyblended fibers

Polycaproamide (PCA) and cationic dyeable poly(ethylene terephthalate) (CDP) polymers were blended mechanically (in ratios of 75/25, 50/50, and 25/75) in a melt twin‐screw extruder to prepare three PCA/CDP polyblended materials. The blends of PCA and CDP were spun into fibers. The molar ratio of dimethyl 5‐sulfoisophthalate sodium salt for CDP was 2%. This study investigated the physical properties of PCA/CDP polyblended fibers with nuclear magnetic resonance, gel permeation chromatography, gas chromatography, potentiometer, differential scanning calorimetry (DSC), thermogravimetric analysis, scanning electron microscopy (SEM), extension stress–strain measurements, density gradient analysis, and rheometry. The experimental results of DSC proved that PCA and CDP formed an immiscible system. In an SEM image of a 50/50 PCA/CDP blend, the morphological aggregation of a larger size, from 3 to 5 μm in diameter, was observed. The rheological behavior of the PCA/CDP polyblended materials exhibited negative‐deviation blends, and the 50/50 blend of the PCA/CDP polyblended fibers showed a minimum tenacity value. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 1710–1715, 2004     

Effects of hygrothermally decomposed polyurethane on the curing and mechanical properties of carbon black‐filled epoxidized natural rubber vulcanizates

Hygrothermally decomposed polyurethane (HD‐PUR) was mixed up to 20 phr in epoxidized natural rubber (with 50 mol % epoxidation; ENR50) recipes, and the curing and mechanical behaviors were studied. Mechanical testing of the ENR50/HD‐PUR vulcanizates determined the tensile, tear, compression‐set, hardness, abrasion, hysteresis, and resilience properties. No significant changes were observed in the tensile properties with the incorporation of HD‐PUR. The ENR50 compounds showed an increase in compression set with increasing HD‐PUR content. Rubbers cured by a semi‐efficient vulcanization system gave the best overall performance. A further improvement in curing and mechanical properties was achieved by the carbon black grade N330 being replaced with a more active grade (N375). © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 2265–2276, 2002     

An Improved Procedure for Determining the Work of Adhesion for Polymer-Solid Contact

Force-balance experiments in conjunction with the Johnson-Kendall-Roberts (JKR) theory have been used to determine the work of adhesion between solid systems. It has been shown that deficiencies in understanding the deformation behavior can lead to erroneous results. A modified procedure for determining the work of adhesion by force-balance experiments and JKR theory using normal displacement behavior has been introduced to address these deficiencies. This procedure involves improved experiental and data analysis protocols and has been applied to give more precise work of adhesion values for PDMS poly(dimethylsiloxane)-PDMS, PDMS-F(fluorinated silicon) and PDMS-Si (silicon) systems. The work of adhesion determinations are consistently less than those estimated by contact angle measurements.     

3D soft-tissue tracking using spatial-color joint probability distribution and thin-plate spline model

Visual tracking techniques based on stereo endoscope are developed to measure tissue motion in robot-assisted minimally invasive surgery. However, accurate 3D tracking of tissue surfaces remains challenging due to complicated deformation, poor imaging conditions, specular reflections and other dynamic effects during surgery. This study employs a robust and efficient 3D tracking scheme with two independent recursive processes, namely kernel-based inter-frame motion estimation and model-based intra-frame 3D matching. In the first process, target region is represented in joint spatial-color space for robust estimation. By defining a probabilistic similarity measure, a mean-shift-based iterative algorithm is derived for location of the target region in a new image. In the second process, the thin-plate spline model is used to fit the 3D shape of tissue surfaces around the target region. An iterative algorithm based on an efficient second-order minimization technique is derived to compute optimal model parameters. The two processes can be computed in parallel. Their outputs are combined to recover 3D information about the target region. The performance of the proposed method is validated using phantom heart videos and in vivo videos acquired by the daVinci^®${\mathrm{daVinci}}^{\circledR }$ surgical robotic platform and a synthesized data set with known ground truth.     

Hybrid clustering solution selection strategy

Cluster ensemble approaches make use of a set of clustering solutions which are derived from different data sources to gain a more comprehensive and significant clustering result over conventional single clustering approaches. Unfortunately, not all the clustering solutions in the ensemble contribute to the final result. In this paper, we focus on the clustering solution selection strategy in the cluster ensemble, and propose to view clustering solutions as features such that suitable feature selection techniques can be used to perform clustering solution selection. Furthermore, a hybrid clustering solution selection strategy (HCSS) is designed based on a proposed weighting function, which combines several feature selection techniques for the refinement of clustering solutions in the ensemble. Finally, a new measure is designed to evaluate the effectiveness of clustering solution selection strategies. The experimental results on both UCI machine learning datasets and cancer gene expression profiles demonstrate that HCSS works well on most of the datasets, obtains more desirable final results, and outperforms most of the state-of-the-art clustering solution selection strategies.