Preparation and cell-materials interactions of plasma sprayed strontium-containing hydroxyapatite coating

The use of strontium-containing hydroxyapatite (Sr-HA) as a biomaterial has been reported recently. In vitro and in vivo studies have shown that Sr-HA promotes osteoblast response and stimulates new bone formation. In order to extend its usage to major load-bearing applications, such as artificial hip replacement, it has been proposed that the material could be used in the form of a coating on implant surfaces. This paper reports a preliminary study of biocompatibility of plasma sprayed Sr-HA coatings on a metallic substrate. Coatings of Sr-HA containing 10 mol% Sr²⁺ was produced on titanium alloy substrates. The coating exhibited good bonding with the substrate. The bioactivity of Sr-HA coating was evaluated in vitro by immersion in simulated body fluid (SBF). After immersion in SBF, Sr-HA coating exhibited great ability to induce apatite precipitation on its surface. The possible effects of cell-materials interactions of Sr-HA coating were examined by culturing osteoprecursor cells (OPC1) on coating surfaces. The effect of Sr-HA was also compared to a hydroxyapatite (HA) coating, which is widely used in orthopedics and dentistry. The results indicated that Sr-HA coating had good biocompatibility with human osteoblasts. OPC1 cells survived and proliferated well on the surface of coating. Sr-HA coating promoted OPC1 cells attachment, and more local contacts were produced on the surface. The presence of Sr stimulated OPC1 cell differentiation and ALP expression. No deleterious effect on ECM formation and mineralization was found with Sr-HA coating. The results indicated that Sr-HA coating had good mechanical properties and bioactivity in vitro.     

Cluster Analysis Based on T‐transitive Interval‐Valued Fuzzy Relations

In this paper, we consider cluster analysis based on T‐transitive interval‐valued fuzzy relations. A fuzzy relation with its partitional tree for obtaining an agglomerative hierarchical clustering has been studied and applied. In general, these fuzzy‐relation‐based clustering approaches are based on real‐valued memberships of fuzzy relations. Since interval‐valued memberships may be better than real‐valued memberships to represent higher order imprecision and vagueness for human perception, in this paper we first extend fuzzy relations to interval‐valued fuzzy relations and then construct a clustering algorithm based on the proposed T‐transitive interval‐valued fuzzy relations. We use two examples to demonstrate the efficiency and usefulness of the proposed method. In practical application, we apply the proposed clustering method to performance evaluations for academic departments of higher education by using actual engineering school data in Taiwan.     

Effect of doping ferrocene in the working fluid of electrohydrodynamic (EHD) micropumps

The effect of doping ferrocene in the working fluid of electrohydrodynamic micropumps was investigated under the application of DC electric fields. The micropump consisted of 100 planar electrode pairs that were embedded along the bottom wall of a 100-micron-high, 5-mm-wide and 26-mm-long microchannel. The width of the emitter and collector electrodes was 20 and 40 µm, respectively, with inter-electrode spacing of 30 µm. A redox dopant, ferrocene, was diffused homogeneously into the working fluid HFE-7100 at 0.05, 0.1 and 0.2 % concentration by weight. The static pressure head generation and flow rate at different back pressure conditions were measured under different applied DC voltages. The current and pressure generated with the doped working fluid were significantly higher than with pure HFE-7100 under an applied DC field. A maximum static pressure of 6.7 kPa and flow rate of 0.47 mL/min at no back pressure were achieved at 700 V.     

Performance of estimating depth in projection based stereoscopic virtual display

Accurate distance estimation is essential for effective user interaction with objects appearing in the virtual space. Research has shown that the distance estimation in the virtual space is not as accurate as that in the real world. The inaccuracy phenomenon is almost exclusively documented for estimating objects appearing straight ahead of the eye. A collection of the accuracy data for targets located in different angles of view in the visual field may be useful in aiding the design of user‐virtual object interaction. This study collected the object to object distance estimation accuracy for targets displayed stereoscopically. There are five horizontal and two vertical viewing angles and three depths, resulting in a total of 30 locations in the virtual space. The distance estimation for any of the 30 object pairs were performed with or without the aid of spatial cues. Significant factors influencing the accuracy and time of distance estimation were identified. Implications of the finding were discussed with respect to the stereoscopic display environment.     

A User‐Centric Evaluation Procedure for the Design of Child‐Resistant Medicine Bottles

Recently, people have begun to realize the importance of child‐resistant (CR) medicine packaging. However, most manufacturers and designers have not been able to effectively provide prevention strategies or design criteria to protect consumers. This research proposes a systematic approach to analyze CR packaging design problems and experiments to evaluate the identified design parameters and to generate the most suitable CR medicine packaging design. The design of a CR packaging bottle is used as an example to help explain the development procedure. During the development procedure, user trials, questionnaires, and children's anthropometric data on bottle opening and hand operations are analyzed. Five design parameters, specifically the cap diameter, cap height, bottle height, bottle diameter, and torsion, are identified and used to perform a Taguchi orthogonal array experimental analysis. A computer‐aided design system is also built to help generate the most suitable design alternatives. The results should assist designers in determining the most important CR design parameters and their most suitable combinations for bottle and related CR medicine packaging design.     

3-D Unitary ESPRIT: Accurate attitude estimation for unmanned aerial vehicles with a hexagon-shaped ESPAR array

Accurate estimation of the attitude of unmanned aerial vehicles (UAVs) is crucial for their control and displacement. Errors in the attitude estimate may misuse the limited battery energy of UAVs or even cause an accident. For attitude estimation, proprioceptive sensors such as inertial measurement units (IMUs) are widely applied, but they are susceptible to inertial guidance error. With antenna arrays currently being installed in UAVs for communication with ground base stations, we can take advantage of the array structure in order to improve the estimates of IMUs via data fusion. In this paper, we therefore propose an attitude estimation system based on a hexagon-shaped 7-element electronically steerable parasitic antenna radiator (ESPAR) array. The ESPAR array is well-suited for installment in the UAVs with broad wings and short bodies. Our proposed solution returns an estimation for the pitch and roll based on the inter-element phase delay estimates of the line-of-sight path of the impinging signal over the antenna array. By exploiting the parallel and centrosymmetric structure in the hexagon-shaped ESPAR array, the 3-dimensional Unitary ESPRIT algorithm is applied for phase delay estimation to achieve high accuracy as well as computational efficiency. We devise an attitude estimation algorithm by exploiting the geometrical relationship between the UAV attitude and the estimated phase delays. An analytical closed-form expression of the attitude estimates is obtained by solving the established simultaneous nonlinear equations. Simulations results show the feasibility of our proposed solution for different signal-to-noise ratio levels as well as multipath scenarios.     

A study of optimal viewing distance in a parallax barrier 3D display

The optimal viewing distance was proposed as a parameter for designing a parallax barrier 3D display. It can be designed based on simple geometric method and by considering the pitches of image display pixels and parallax barrier, or even including the aperture ratios of the image display pixels and parallax barrier. It can be analyzed by using ray tracing method. By considering the optical refraction index of the cover glass, the angular behavior of the system becomes more realistic; however, the geometric method is difficult to be used. We propose a revised method for estimating the view distance and angular behavior. In this paper, we have demonstrated a designated eye position (DEP) for each view and shown that multiple DEPs make a circular curve around the center of the display. We prove the new concept by comparing the optical ray tracing calculations and optical measurement.     

An Integrated Model of the Toyota Production System with Total Quality Management and People Factors

The Toyota production system (TPS), or lean production, has been associated with many benefits for manufacturing firms that implement the system. However, to implement the TPS successfully, it is necessary to integrate the so‐called “hard side” of the system (that is, the technical aspects of material handling) with the “soft side” of the program (that is, the aspects associated with human factors). The present study makes a contribution to such a holistic view of the TPS by proposing an integrated model that consists of the technical aspects of the TPS, together with elements associated with total quality management (TQM), human resources management (HRM), and certain identified “people factors.” The study then uses structural equation modeling (SEM) to test this holistic model using data obtained from a questionnaire survey of 153 Taiwanese manufacturing firms. The empirical study confirms the appropriateness of the causal model, which is evaluated by several goodness‐of‐fit methods. The study confirms the proposition that the inclusion of the “people factors” together with TQM and HRM significantly improves the realization of benefits associated with the TPS practices of “just‐in‐time” (JIT) and “autonomation.” The conclusion is that such an integrated model provides a much more effective “lean system” and has the potential to produce significantly enhanced benefits for firms that implement it. © 2012 Wiley Periodicals, Inc.