The development of a stress analysis code for nuclear graphite components in gas-cooled reactors

Most of the UK nuclear power reactors are gas-cooled and graphite moderated. As well as acting as a moderator the graphite also acts as a structural component providing channels for the coolant gas and control rods. For this reason the structural integrity assessments of nuclear graphite components is an essential element of reactor design. In order to perform graphite component stress analysis, the definition of the constitutive equation relating stress and strain for irradiated graphite is required. Apart from the usual elastic and thermal strains, irradiated graphite components are subject to additional strains due to fast neutron irradiation and radiolytic oxidation. In this paper a material model for nuclear graphite is presented along with an example of a stress analysis of a nuclear graphite moderator brick subject to both fast neutron irradiation and radiolytic oxidation.     

Synthesis and characterization of novel copolymers with the trimethylsilyl group for deep‐UV photoresists

N‐(4‐Acetoxyphenyl) maleimide (APMI) and three kinds of comonomers bearing a trimethylsilyl group were copolymerized at 60°C in the presence of azobisisobutyronitrile (AIBN) as an initiator in 1,4‐dioxane to obtain the three IP, IIP, and IIIP copolymers. These copolymers were removed from the acetoxy group in a transesterification process into new IVP, VP, and VIP copolymers with a pendant hydroxyl group. Two modified processes were adopted to prepare photoresists using these copolymers. The first process involved mixing the dissolution inhibitor, o‐nitrobenzyl cholate, with the new copolymers. Second, o‐nitrobenzyl cholate was introduced into the copolymers using 1,8‐diazabicyclo[5.4.0]undec‐7‐ene (DBU) in dimethylformamide (DMF). The cyclic maleimide structure is responsible for the high thermal stability of these copolymers. After irradiation using deep–UV light and development with aqueous Na₂CO₃ (0.01 wt %), the developed patterns showed positive images and exhibited good adhesion to the silicon wafer without using any adhesion promoter. The resolution of these resists was at least 0.8 μm and an oxygen‐plasma etching rate was 1/5.3 to that of hard‐baked HPR‐204. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 2791–2798, 2002; DOI 10.1002/app.10255     

Kinetic studies of a soluble alpha beta complex of nitrate reductase A from Escherichia coli. Use of various alpha beta mutants with altered beta subunits

A soluble alpha beta complex of nitrate reductase can be obtained from a strain of Escherichia coli that lacks the narI gene and expresses only the alpha and beta subunits. The beta subunit contains four Fe-S centres and the alpha subunit contains the molybdenum cofactor, which is the site at which nitrate is reduced. Despite the lack of the gamma subunit of the complete enzyme, this complex can still catalyse the reduction of nitrate with artificial electron donors such as benzyl viologen, so that it is suitable for studying the transfer of electrons between these two types of redox centre. To examine whether the electrons from reduced benzyl viologen are initially delivered to the Fe-S centres, or directly to the molybdenum cofactor, or both, we have studied the steady-state kinetics and the binding of benzyl viologen to the alpha beta complex and mutants alpha beta* with altered beta subunits. Reduction of the enzyme by reduced benzyl viologen in the absence of nitrate showed that all four Fe-S centres and the molybdenum cofactor could be reduced. Two classes of site with different equilibrium constants could be distinguished. The kinetic results suggest that benzyl viologen supplies its electrons directly to the molybdenum cofactor, at a rate showing a hyperbolic dependence on the square of the concentration of the electron donor. A reaction mechanism is proposed for the reduction of nitrate catalysed by the alpha beta complex of nitrate reductase with artificial electron donors.     

Effect of grain boundary phase on the thermal conductivity of aluminium nitride ceramics

AIN with high thermal conductivity was fabricated by pressureless sintering with Y₂O₃ as the sintering aid. The thermal conductivity was observed to increase with sintering time (up to 8 h) at 1810 °C. The distribution of the sintering aid was identified as one of the major factors influencing the thermal conductivity in AIN. Non-uniform distribution of the grain boundary phase was found to be associated with a significant amount of porosity, resulting in the enhancement of phonon scattering and thereby lowering the thermal conductivity.     

Junction breakdown instabilities in deep trench isolationstructures

Junction breakdown voltage instability in a p-n junction formed in bulk silicon adjacent to a deep trench filled with polysilicon was investigated. The structure investigated consists of a 5-μm-deep trench filled with heavily p-doped polysilicon. The trench is open at the bottom and is consequently shorted to the p-substrate. The time-dependent behavior of the walkout or the breakdown voltage instability is similar to that reported for planar p-n junctions terminating on surface oxide. Results suggest that trapping of holes in the trench sidewall dielectric is responsible for this phenomenon. The product of trapping center concentration and capture cross section N σ is estimated to be 90 cm^-1     

Synthesis and characterization of a novel proton‐exchange membrane for fuel cells operating at high temperatures and low humidities

The synthesis of a p‐toluidine/formaldehyde (PTF) resin was performed, and the effects of the molar ratio of the individual monomers and the polymerization conditions on the structure of the PTF resin were studied. Fourier transform infrared and ¹³C‐NMR spectra were used to characterize the PTF. Wide‐angle X‐ray diffraction patterns revealed the crystalline structures of various PTFs. Polarized optical microscopy revealed that the molar ratio of the monomers had a strong effect on the crystalline morphologies. A longer polymerization time turned out a polymer with a higher intrinsic viscosity and molecular weight, which led to differences in the proton conductivity. All of the PTFs showed a higher proton conductivity than a commercial Nafion membrane at 90–100°C and 0% relative humidity. The proton conductivity of the PTF series could be improved by sulfonation with sulfuric acid and could be maintained after blending with polyurethane. Pure methanol could be used as a fuel source because of the insolubility and nonwetting properties of PTF in methanol to increase the output current density for a PTF membrane electrode assembly. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2008     

Laboratory simulated slipstream testing of novel sulfur removal processes for gasification application

The Wabash River Integrated Methanol and Power Production from Clean Coal Technologies (IMPPCCT) project is investigating an Early Entrance Coproduction Plant (EECP) concept to evaluate integrated electrical power generation and methanol production from coal and other carbonaceous feedstocks. Research, development and testing (RD&T) that is currently being conducted under the project is evaluating cost effective process systems for removing contaminants, particularly sulfur species, from the generated gas which contains mainly synthesis gas (syngas), CO₂ and steam at concentrations acceptable for the methanol synthesis catalyst. The RD&T includes laboratory testing followed by bench-scale and field testing at the SG Solutions Gasification Plant located in West Terre Haute, Indiana. Actual synthesis gas produced by the plant was utilized at system pressure and temperature for bench-scale field testing.     

Internal excitation of intermediate mass fragments from collisions of 36Ar+Ag nuclei at 35 MeV/nucleon

An extruding wire knife was used to give adult male CFHB rats a minimally traumatic unilateral mechanical lesion of the medial forebrain bundle. In addition, some rats received bilateral intrastriatal injections of one of three fluorescent retrograde tracers either eight days before or eight days after the lesion. Injections made after the lesion revealed that about half of the animals had complete lesions of the nigrostriatal tract, while the other half were incompletely lesioned, the mean proportion of non-axotomized neurons being 23%. Over the 10 weeks following the lesions, the number of tyrosine hydroxylase-immunoreactive cells in the lesioned substantia nigra fell linearly, reaching a mean of 29% of that of the control substantia nigra. In the animals which were completely lesioned, neuronal survival at 10 weeks varied between 6 and 12%. That the disappearance of tyrosine hydroxylase-immunoreactive neurons was due to cell death rather than the loss of tyrosine hydroxylase itself was confirmed by labelling the cells with Fluoro Gold before axotomy; the tracer was seen in survival neurons, microglia and in a few involuted neurons which continued to be tyrosine hydroxylase-immunoreactive. This percentage of neurons surviving axotomy corresponds to the proportion of substantia nigra neurons which project to the contralateral striatum, and these neurons were in the region of the substantia nigra from which the contralateral projection originated. It is concluded that following mechanical transection of the nigrostriatal tract, all truly axotomized substantia nigra neurons die over a period of about 10 weeks.     

Scalar quantisation of LSF parameters using vector measurement

A new form of line spectral frequency (LSF), bounded line spectral frequency, is presented. It is shown that the new representation is more efficient than the direct line spectral frequency and the differential line spectral frequency (DLSF). By using a vector measure, the scalar quantisation of tenth-order linear predictive coding (LPC) parameters can be coded at 28 bit/frame with a transparent quantisation quality