Accurate rotor flux orientation technique for indirect rotor flux oriented control of induction motor drives

Abstract

In this paper, a novel detuning index is first proposed for indicating the proper timing required to correct the rotor time constant of indirect rotor flux oriented controlled single‐cage induction motor drives. This index can faithfully reflect the influence of rotor resistance changes as well as rotor flux changes. It also reduces greatly the number of rotor time constant estimations in practical applications. The theoretical basis of the index and the physical meaning are described in the paper in detail. Based on the proposed index, an on‐line rotor time constant estimator is also proposed to make corrections. Only existing available quantities of the closed loop controller are used for calculating the estimated rotor time constant accurately. Both simulation and experimental results verify the effectiveness of the proposed rotor flux orientation technique. It is seen that the proposed rotor flux orientation technique is suitable for practical applications.     

A microprocessor‐based electrohydraulic servo system

Abstract

A microprocessor‐based electrohydraulic servo system has been constructed and tested. It is implemented with an 8‐bit single‐chip microcomputer to control a hydraulic motor. The control algorithm is based on variable structure control principles. The experimental results show that the system is under good control and possesses a great potential for electrohydraulic servo control.     

Continuous photodetection of resonance fluorescence

Abstract

The concept of photodetection as a continuous quantum measurement introduced by Srinivas and Davies is extended to the detection of resonance fluorescence. This is a new approach to an old subject. This is also a new development in continuous photodetection in the sense that a fermion rather than the traditional boson field is the subject of monitoring. The superoperators for the no-count and the one-count processes are postulated, following the examples of Srinivas and Davies. The probability for the m-count process is then derived on the basis of these postulates. The first two factorial moments of the photon-number distribution are calculated, which are then used to evaluate the non-classical effects in resonance fluorescence. A parameter slightly different from Mandel's is found to be more suitable indicator of photon antibunching in the transient state.     

Stress singularity analysis in the restorations of premolar class ii cavities

Abstract

This paper presents the singular stress analysis near the apex of a structure formed during dental restoration of a premolar class II cavity. Based on the elasticity theory, the stresses may go to infinity at the junctions of different materials (e.g. dentine, enamel, restoration materials). Tensions will cause material separation and then material fracture. In order to reduce the failure probability, the degree of stress concentration has to be reduced. The stress singularity order and the stress intensity factor are two parameters, which are often used in fracture analysis. The objective of this paper is to find conditions such that non‐singular stress fields are possible. Three critical positions in the restoration structure are discussed.

They are the tips of interface between (1) enamel and restoration; (2) dentine and restoration; and (3) enamel, dentine and restoration. In the last two cases, the restoration may be bonded or debonded to enamel or dentine. After employing Kolosov‐Muskhelishvili complex functions together with the eigenfunction expansion method, the singularity orders are computed theoretically. Weak stress singularity conditions can be sought by properly selecting cutting angles or restoration materials.     

An experimental model of Chinese textual database

Abstract

A textual database deals with retrieval and manipulation of documents. It allows a user to search on‐line complete documents or parts of documents rather than attributes of documents. Resembling a formatted database which uses a data model as its underlying structure, a textual database has to base its development upon a document model. In this paper, a document model, called the ECHO model, is proposed. The ECHO model provides a document representation, called the ECHO structure, for expressing documents and operations on the representation that serve to express queries and manipulations on documents. It has the ability to provide multiple document structures for a document, a flexible search unit for retrieving textual information, and a subrange search on a textual database. In addition, the ECHO structure is relatively easy to maintain. An architecture of a textual database based on the ECHO model is also proposed. In order to improve the query performance, a refined character inversion method, called ARCIM, is proposed as the text‐access method of the Chinese textual database. The ARCIM can retrieve texts faster than a simple inversion method and requires less space overhead.     

Layered Nanoprobe for Long‐Lasting Fluorescent Cell Label

A long‐lasting particle‐based fluorescent label is designed for extended cell imaging studies. This onion‐like nanoprobe is constructed through layer‐by‐layer fabrication technology. The nanoprobes are assembled with multiple layers of optically quenched polyelectrolytes, the fluorescence signal of which can be released later by intracellular proteolysis. Upon incubation with cells, the assembled nanoprobes are taken up efficiently. The tight packing and layered assembly of the quenched polyelectrolytes slow subsequent intracellular degradation, and then result in a prolonged intracellular fluorescence signal for up to 3 weeks with no noticeable toxicity.     

Measurement of periodic micro flows using micro-particle image velocimetry with phase sampling

A phase-sampling method has been developed to measure periodic flows at a high temporal resolution using conventional micro-particle image velocimetry (PIV). In this technique, the sampling is set such that each velocimetry dataset represents a unique point in phase of a periodic flow. The flow characteristics over a single cycle are reconstructed from measurements over a number of cycles, thus allowing measurement at a higher temporal resolution than the PIV system. The flow measurements were performed for AC electroosmotic flows and verified with results from the phase-locking technique. The temporal resolution is limited by the shortest camera exposure time and the time separation between laser pulses. The theoretical sampling resolution can be as low as 20 μs for 100 Hz periodic flows. A resolution of 200 μs was obtained in the experiment using 40 velocimetry datasets.     

A study on the formation of a measurement scale for the environmental quality of Taiwan’s long-term care institutions by the Delphi method

This study used a two-round modified Delphi technique with a questionnaire survey in order to reach a consensus for the questionnaire; the survey was conducted from September to December 2009. The six indicators for the environmental quality of long-term care institutions in Taiwan are (1) indoor environmental quality, (2) safety equipment for the prevention and management of disasters occurring in residents?? daily lives, (3) provision for assistive devices for residents?? daily use, (4) provision for privacy and individualized space, (5) provision for comfortable and decorated indoor environments, and (6) provision for social interaction space. The scale included 34 items with an acceptable number of panel members and acceptable construct validity. Panel members all highly approved of Indicators 1, 2, and 6. Although they approved of Indicator 3, they suggested that caregivers at institutions should replace the functions of living assistive devices. They approved of Indicator 5; however, they questioned the method for providing comfortable and decorated environments. They approved of Indicator 4; however, they suggested that private space need not be provided in the living room of the institution. In terms of long-term care institution environments in Taiwan, Indicators 1, 2, and 6 were important for protecting residents?? physical and psychological well-being and improving their social interactions. Indicator 3, although important, could be directly replaced by caregivers. Indicator 5 required more implementation methods, while Indicator 4, the living room of the institution, was considered unnecessary.     

Influences of superheated steaming and roasting on the quality and antioxidant activity of cooked sweet potatoes

Roasted sweet potato is a popular food because of the attractive aroma produced by the Maillard reaction. However, the roasting process may lead to charred skin. Cooking with superheated (saturated) steam provides a solution to this problem. As the results show, when comparing sweet potatoes cooked by superheated steam, and those roasted for 40 min, respectively, the degree of gelatinisation could reach as high as 95% with only 140 °C superheated steam, while roasting required temperatures up to 240 °C. Moreover, in appearance, the skins of the sweet potatoes cooked using superheated steam were not charred like the roasted ones. However, sweet potatoes roasted at 240 °C for 60 min had the highest overall sensory score. When comparing the antioxidant activity, the sweet potatoes cooked by superheated steam had the highest content of total phenol and flavonoids, the best scavenging ability of 1,1‐diphenyl‐2‐picrylhydrazyl (DPPH) and the highest ferric‐reducing ability of plasma (FRAP).     

A simple practical analytic design method for multiloop‐controlled PWM switching regulators

Abstract

In this paper, a simple practical analytic method is proposed for designing multiloop‐controlled pulse width modulation (PWM) switching regulators. First, an equivalent single loop gain is presented and an approximate optimal set of closed‐loop poles is suggested according to the given specification such that the familiar design concept of a single‐loop second order system can be applied directly. In particular, closed form expressions of the feedback gains and the unknown parameters of the standard implemented circuit are derived. This renders the implementation problem surprisingly simple. Finally, some experimental results are also presented to demonstrate the effectiveness of the proposed method.