Frame selection for OCR from video stream of book flipping

Multimedia Tools and Applications - Optical Character Recognition (OCR) in video stream of flipping pages is a challenging task because flipping at random speed causes difficulties in identifying...     

Influence of Grain Boundary Complexion on Deformation Mechanism of High Temperature Bending Creep Process of Cu Bicrystal

Despite of substantial advancement, the effect of grain boundary (GB) complexions on high temperature creep deformation process has not been fully understood. In this paper, we have studied the high temperature bending creep deformation of copper bicrystal with various GB complexions under different loads using molecular dynamics simulation. It has been found that specimen with normal kite GB complexion have better creep resistance properties when subjected to comparatively lower applied load. In case of monolayer Zr segregation, a drastic decrease in creep strength as well as creep plasticity is observed due to inhibition of GB migration. On the other hand, deviation between creep properties for specimen with split-kite GB complexion and split-kite bilayer Zr segregation GB complexion is minimal. Enhanced creep plasticity is observed in case of split-kite bilayer Zr segregation GB complexion, which is due to formation of interpenetrating icosahedral clusters in the necking region. Fracture in specimen with monolayer Zr segregation GB complexion has occurred by means of slip phenomenon at lower deformation load whereas amorphization and necking is observed at higher deformation load. In case of specimen with bilayer Zr segregation GB complexion, it is found that fracture has occurred through amorphization and necking at all deformation loads due to higher GB thickness.     

Isolation and characterization of components responsible for neuroprotective effects of Allium cepa outer scale extract against ischemia reperfusion induced cerebral injury in mice

The antioxidant-mediated neuroprotective effect of Allium cepa outer scale extract (ACE) in mice with cerebral ischemia-reperfusion (I-R) injury was demonstrated in our earlier work. The current investigation aimed at establishing the bioactive component(s) responsible for this activity. Thus ACE was fractionated into ethyl acetate (EF) and aqueous (AF) fractions. These fractions were evaluated against cerebral I-R injury in mice. I-R injury in mice was induced by bilateral common carotid artery occlusion followed by 24 hr reperfusion. Memory, sensorimotor functions, cerebral infarct size, and oxidative stress were measured to address the neuroprotective mechanism of test substances. EF showed marked improvement of memory and sensorimotor functions by reducing brain oxidative stress and infarct size in mice after I-R injury. The bioactive EF was subjected to chromatographic (HPLC-PDA, HPLC-MS, preparative HPLC) and spectroscopic studies to isolate and identify the neuroprotective compounds. This lead to separation of three components, namely quercetin, quercetin 4′-O-glucoside, and the remaining fraction, from EF. The separated components were biologically evaluated. These components showed improvement in mice with I-R injury. But, EF displayed more marked neuroprotective effects as compared to the isolated components. The distinct neuroprotective outcome of EF may be credited to the synergistic action of compounds present in EF. Further studies such as evaluation of neurotoxic effects and other possible neuroprotective mechanisms are required to develop EF as a neuroprotective drug.     

Performance Investigations and PAPR Reduction Analysis Using Very Efficient and Optimized Amended SLM Algorithm for Wireless Communication OFDM System

Wireless Personal Communications - The orthogonal frequency division multiplexing (OFDM) is the most encouraging multi-carrier modulation system chosen for the high data rates but the objective is...     

The effect of surface recombination on the frequency-dependentcharacteristics of an ion-implanted GaAs OPFET

The effect of modulation frequency and surface recombination on the characteristics of an ion-implanted GaAs OPFET is determined analytically. The drain-source current is found to decrease with the increase in both modulation frequency and trap center density. The current changes significantly with the trap center density only when the latter is greater than 10²⁰/m². The threshold voltage does not change appreciably with the modulation frequency as in a silicon OPFET. However, the increased in the trap center density causes V_T to increase in the enhancement device and decrease in the depletion device. Further, V_T increases under the normally ON condition and decreases under the normally OFF condition with an increase in the photon absorption coefficient in GaAs. Some anomalous behavior is observed for higher values of the absorption coefficient     

Is PGL-1 also present in Leishmania donovani promastigotes?

We report a 14 year old boy who presented as a neonate with functional pulmonary atresia due to Uhl's disease with emphasis on the later detection of restrictive right ventricular physiology.     

Interactive priming of biochar and labile organic matter mineralization in a smectite-rich soil

Biochar is considered as an attractive tool for long-term carbon (C) storage in soil. However, there is limited knowledge about the effect of labile organic matter (LOM) on biochar-C mineralization in soil or the vice versa. An incubation experiment (20 °C) was conducted for 120 days to quantify the interactive priming effects of biochar-C and LOM-C mineralization in a smectitic clayey soil. Sugar cane residue (source of LOM) at a rate of 0, 1, 2, and 4% (w/w) in combination with two wood biochars (450 and 550 °C) at a rate of 2% (w/w) were applied to the soil. The use of biochars (~ -36‰) and LOM (-12.7‰) or soil (-14.3‰) with isotopically distinct δ(13)C values allowed the quantification of C mineralized from biochar and LOM/soil. A small fraction (0.4-1.1%) of the applied biochar-C was mineralized, and the mineralization of biochar-C increased significantly with increasing application rates of LOM, especially during the early stages of incubation. Concurrently, biochar application reduced the mineralization of LOM-C, and the magnitude of this effect increased with increasing rate of LOM addition. Over time, the interactive priming of biochar-C and LOM-C mineralization was stabilized. Biochar application possesses a considerable merit for long-term soil C-sequestration, and it has a stabilizing effect on LOM in soil.     

Rapid Development of Fasting-Induced Hepatic Lipidosis in the American Mink (<Emphasis Type=Italic>Neovison vison</Emphasis>): Effects of Food Deprivation and Re-Alimentation on Body Fat Depots,Tissue Fatty Acid Profiles,Hematology and Endocrinology

Hepatic lipidosis is a common pathological finding in the American mink (Neovison vison) and can be caused by nutritional imbalance due to obesity or rapid body weight loss. The objectives of the present study were to investigate the timeline and characterize the development of hepatic lipidosis in mink in response to 0–7 days of food deprivation and liver recovery after 28 days of re-feeding. We report here the effects on hematological and endocrine variables, body fat mobilization, the development of hepatic lipidosis and the alterations in the liver lipid classes and tissue fatty acid (FA) sums. Food deprivation resulted in the rapid mobilization of body fat, most notably visceral, causing elevated hepatosomatic index and increased liver triacylglycerol content. The increased absolute amounts of liver total phospholipids and phosphatidylcholine suggested endoplasmic reticulum stress. The hepatic lipid infiltration and the altered liver lipid profiles were associated with a significantly reduced proportion of n-3 polyunsaturated FA (PUFA) in the livers and the decrease was more evident in the females. Likewise, re-feeding of the female mink resulted in a more pronounced recovery of the liver n-3 PUFA. The rapid decrease in the n-3/n-6 PUFA ratio in response to food deprivation could trigger an inflammatory response in the liver. This could be a key contributor to the pathophysiology of fatty liver disease in mink influencing disease progression.     

Hydrogen generation and separation using Gd0.2Ce0.8O1.9−δ–Gd0.08Sr0.88Ti0.95Al0.05O3±δ mixed ionic and electronic conducting membranes

Decomposition of steam under a chemical driving force at moderate temperatures offers a simple and economical way to generate hydrogen. A significant amount of hydrogen can be generated and separated by splitting steam and removing the oxygen using Gd_0.2Ce_0.8O_1.9−δ (GDC)–Gd_0.08Sr_0.88Ti_0.95Al_0.05O_3±δ (GSTA) mixed oxygen ionic and electronic conducting membranes. Hydrogen generation experiments for the self-supported thick membranes and porous supported thin membranes were conducted at different oxygen partial pressure gradients across the membrane established using H₂–H₂O mixture gas. Experimental results indicate that the hydrogen generation from steam using GDC–GSTA MIEC membranes at elevated temperatures is mainly controlled by the bulk diffusion of oxygen for the self-supported thick membranes, while the permeation process for the porous supported thin membranes is mixed controlled, i.e. the hydrogen generation/oxygen permeation process is controlled by the surface exchange reactions and bulk diffusion of oxygen through the MIEC membrane. A mathematical model for the calculation of the area specific hydrogen generation rate is proposed in this paper based on the measured oxygen partial pressures, gas compositions, and gas flow rates of the inlet and outlet gases on feed side of the membrane, as well as the permeation area of the membrane.     

Development of Bigels Based on Stearic Acid–Rice Bran Oil Oleogels and Tamarind Gum Hydrogels for Controlled Delivery Applications

In the last few decades, different types of gels have been widely studied as potential drug delivery carriers. In this paper, we propose the synthesis of an oleogel, a tamarind gum hydrogel, and bigels for applications as drug delivery matrices. The oleogel was prepared by mixing stearic acid and rice bran oil, whereas the hydrogel was prepared by mixing tamarind gum with a hydroethanolic solution. Hydrogel‐in‐oleogel and oleogel‐in‐hydrogel bigels were prepared by mixing the hydrogel and the oleogel. The suitability of the formulations for controlled drug release applications was thoroughly examined using microscopy, Fourier transform infrared (FTIR) spectroscopy, as well as mechanical, electrical, thermal, drug release, and antimicrobial studies. An alteration in the microarchitecture of the bigels is observed when the oleogel and the hydrogel are mixed in varying proportions. The associative interactions within the formulations increase with the increase in the hydrogel content. The bigels exhibit the presence of stearic acid melting endotherm (associated with the oleogel) and water evaporation endotherm (associated with the hydrogel). This study suggests that the hydrogel has lowest bulk resistance compared to the other formulations. The structural breakdown of the bigels is composition‐dependent, and the bulk electrical resistance is mainly governed by the oleogel phase. An increase in the diffusion of the moxifloxacin HCl from the formulations is observed with the increase of the hydrogel proportion, which in turn increases the rate of release of the drug. The proposed formulations also exhibit good antimicrobial efficacy. The analysis of these properties suggests that specific formulations can be tailored by need‐based applications of the drug release rate.