Intracranial hemorrhage associated with idiopathic thrombocytopenic purpura: report of seven patients and a meta-analysis

We present the results of a meta-analysis using clinical data obtained from seven of our patients and 24 previously reported patients with idiopathic thrombocytopenic purpura complicated by intracranial hemorrhage. Twenty-four had an intracerebral hemorrhage (ICH) and seven had a subdural hematoma (SDH). Mean age of the patients with ICH was significantly younger than those with SDH. The mortality rate of ICH associated with ITP was similar to that of spontaneous ICH. All seven patients with SDH improved without sequelae.     

Simple culling methods for continuous collision detection of deforming triangles

We present a simple and efficient approach for continuous collision detection of deforming triangles based on conservative advancement. The efficiency of our approach is due to a sequence of simple collision-free conditions for deforming triangles. In our experiment, we show that our CCD algorithm achieves 2-30 times performance improvement over existing algorithms for triangle primitives.     

Adaptive synthesis of distance fields

We address the computational resource requirements of 3D example-based synthesis with an adaptive synthesis technique that uses a tree-based synthesis map. A signed-distance field (SDF) is determined for the 3D exemplars, and then new models can be synthesized as SDFs by neighborhood matching. Unlike voxel synthesis approach, our input is posed in the real domain to preserve maximum detail. In comparison to straightforward extensions to the existing volume texture synthesis approach, we made several improvements in terms of memory requirements, computation times, and synthesis quality. The inherent parallelism in this method makes it suitable for a multicore CPU. Results show that computation times and memory requirements are very much reduced, and large synthesized scenes exhibit fine details which mimic the exemplars.     

Automated synthesis of multiple analog circuits using evolutionary computation for redundancy-based fault-tolerance

Analog circuits are one of the most important parts of modern electronic systems and the failure of electronic hardware presents a critical threat to the completion of modern aircraft, spacecraft, and robot missions. Compared to digital circuits, designing fault-tolerant analog circuits is a difficult and knowledge-intensive task. A simple but powerful method for robustness is a redundancy approach to use multiple circuits instead of single one. For example, if component failures occur, other redundant components can replace the functions of broken parts and the system can still work. However, there are several research issues to make the redundant system automatically. In this paper, we used evolutionary computation to generate multiple analog circuits automatically and then we combined the solutions to generate robust outputs. Evolutionary computation is a natural way to produce multiple redundant solutions because it is a population-based search. Experimental results on the evolution of the low-pass, high-pass and band-stop filters show that the combination of multiple evolved analog circuits produces results that are more robust than those of the best single circuit.     

Digital parallelism, perpendicularity, and rectangles

The slope of digital line segments is defined and an algorithm to evaluate it is presented. Parallelism and perpendicularity of two digital line segments are also defined. Finally, rectangular digital regions are defined and characterized, and an algorithm that determines whether or not a given digital region is a digital rectangle is presented.     

Enantioselectivities of Chiral Ti(IV) Salen Complexes Immobilized on MCM-41 in Asymmetric Trimethylsilylcyanation of Benzaldehyde

A new heterogeneous system for catalytic trimethylsilylcyanation of benzaldehyde has been developed by immobilizing Ti(IV) salen onto ordered mesoporous silica (MCM-41). The immobilization was performed according to different methods: (i) direct condensation of silanol on the silica surface with Ti(IV) salen and (ii) multigrafting of salicylaldehyde derivatives and diaminocyclohexane using 3-mercaptopropyl-functionalized MCM-41 as a starting material. The heterogenized salen catalysts showed a high enantioselectivity for the addition of trimethylsilyl cyanide to benzaldehyde.     

Poly(butylene terephthalate)/organoclay nanocomposites prepared by in situ interlayer polymerization and its fiber (II)

Intercalated nanocomposites with poly(butylene terephthalate) (PBT) incorporated between the montmorillonite layers were synthesized from dimethyl terephthalate and 1,4-butane diol by using an in situ interlayer polymerization. The PBT nanocomposites were melt-spun at different organoclay contents to produce monofilaments. The samples were characterized by using wide angle X-ray diffraction, electron microscopy, thermal analysis, and tensile testing. The extent of the clay layer in the PBT was confirmed by using X-ray diffraction and electron microscopy, and the clay layer was found to be highly dispersed on a nanometer scale. The addition of only a small amount of organoclay was enough to improve the thermo-mechanical properties of the PBT hybrid fibers. The hybrids were extruded with various draw ratios (DRs) to examine the tensile mechanical property of the fibers. At DR=1, the ultimate tensile strength of the hybrid fibers increased with the addition of clay up to a critical content and then decreased. However, the initial modulus monotonically increased with increasing amount of organoclay in the PBT matrix. When the DR was increased from 1 to 6, for example, the strength and the initial modulus values of the hybrids containing 3 wt% organoclay decreased linearly.     

Viscosity effect in polyolefin ternary blends and composites

Ternary blends of PP (80) /rubber (EPM, EPDM) (10) / PE (10) and PP (80) / rubber (10) / CaCO₃ (10) composites were prepared in a twin-screw extruder. With polyethylene (PE) viscosity comparable to, or higher than that of rubber, the dispersed phase formed a reticulate structure with reduced size. On the contrary, when the viscosity of PE was significantly lower than that of rubber, the dispersed phase formed almost homogeneous morphology. With reticulate morphology, PE crystallinity content, hardness, modulus, and elongation at break of the ternary blend increased. In polypropylene (PP) / rubber / CaCO₃ composites, better dispersion of CaCO₃ in the PP matrix was obtained when the viscosity of rubber was significantly higher than that of matrix. With better dispersion, hardness and tensile properties were improved, but the impact strength more or less decreased. © 1993 John Wiley & Sons, Inc.     

Microstructural Evolution of Gas-Pressure-Sintered Si3N4 with Yb2O3 as a Sintering Aid

Microstructural evolution of gas-pressure-sintered Si₃N₄ with Yb₂O₃ as a sintering aid was observed. Microstructures typical for in situ toughened Si₃N₄, i.e., large elongated grains randomly distributed in a fine matrix, were observed. However, the size of the elongated grains near the surface was much larger than that at the center, resulting in two distinct regions: an inner region and an outer region. The smaller the amount of Yb₂O₃ added, the larger the difference in the size of the elongated grains between the outer and inner regions. The difference between microstructures was diminished when 16 wt% Yb₂O₃ was added. The microstructural change with Yb₂O₃ content was attributed to the evaporation of Yb-containing liquid phase from the surface.