Vibration control of a flexible structure using a hybrid mount

This paper presents vibration control of a flexible beam structure using a hybrid mount which consists of elastic rubber and piezoelectric stack actuator. After identifying stiffness and damping properties of the rubber and piezoelectric elements, a mechanical model of the hybrid mount is established. The mount model is then incorporated with the beam structure, and the governing equation of motion is obtained in a state space. A sliding mode controller is designed in order to actively attenuate the vibration of the beam structure subjected to high-frequency and small magnitude excitations. The controller is experimentally realized and measured control responses such as acceleration of the beam structure and force transmission through the hybrid mount are evaluated and presented in both frequency and time domains.     

Mechanism of simultaneous solutes separation and concentration by size exclusion cyclic separation

The semicontinuous separation/concentration of two solutes with different molecular size by the size exclusion cyclic separation method is based on the opposite swelling responses of two gels to a temperature change. Experimental results of separation and concentration of solutes are verified qualitatively by the theoretical models based on the local equilibrium assumption. Separation of two solutes is shown by the breakthrough curves in coupled gel columns. In closed coupled columns, the volumetric space for the large molecules which are totally excluded from the gels becomes smaller, creating a concentrating effect as the gels swell when temperature changes. A mechanistic model is suggested to predict the large molecule concentration to increase to its solubility limit as cycle repeats.     

Role of conserved Asn-Tyr-Asp-Tyr sequence in bacterial copper/2,4, 5-trihydroxyphenylalanyl quinone-containing histamine oxidase

Copper amine oxidase contains a covalently bound quinonoid cofactor, 2,4,5-trihydroxyphenylalanyl quinone (TPQ), which is synthesized by post-translational modification of a specific tyrosyl residue occurring in the highly conserved sequence, Asn-Tyr-(Asp/Glu)-Tyr. To elucidate the role(s) of the conserved sequence in the biogenesis of TPQ, each of the corresponding residues at positions 401-404 in the recombinant histamine oxidase from Arthrobacter globiformis has been replaced with other amino acids by site-directed mutagenesis. When Asn-401 was changed to Asp or Gln, the rate of TPQ formation by copper-dependent self-processing was 10(3)- to 10(4)-fold slower than in the wild-type enzyme. When Tyr-402 was replaced by Phe, TPQ was not formed at all, showing that Tyr-402 is essential as the precursor to TPQ. In contrast, Asp-403 could be replaced by Glu without changes in the rate of TPQ formation, whereas its replacement by Asn led to a marked decrease. Furthermore, when Tyr-404 was changed to Phe, TPQ was formed swiftly on incubation with copper ions, but the TPQ enzyme exhibited very low activity with altered substrate specificity. These results collectively indicate that a very rigorous structural motif is required for efficient formation of TPQ and for the catalytic activity in the active site of copper amine oxidases.     

Reduction of loading effect by tungsten etchback in a magneticallyenhanced reactive ion etcher

The plug loading effect occurring during the etchback of tungsten was investigated in a magnetically enhanced reactive ion etcher using SF ₆/Ar mixtures. It was found that while the plug loading effect is independent of varying SF₆/Ar flow rate ratio and magnetic field intensity, it is reduced under the condition of high selectivity of tungsten relative to TiN which was achieved at high chamber pressure and low RF power. It is proposed that when TiN is used as a glue layer, the W etch rate enhancement in the plug is mainly controlled by a local loading effect. Under the optimized etchback conditions the plug loss was successfully controlled without the tungsten residue left on severe topology     

Pathogenesis of malignant ascites formation: initiating events that lead to fluid accumulation

Initiating events leading to the accumulation of malignant ascites in the peritoneal cavity were investigated in two syngeneic transplantable murine ascites-producing tumors, MOT mouse ovarian tumor and the TA3/St mammary carcinoma. The transport of two tracers, 125I-labeled human serum albumin (125I-HSA) and 51Cr-labeled red blood cells (51Cr-RBC), into and out of the peritoneal cavity was studied at early times after i.p. tumor cell injection, prior to abundant fluid accumulation, and at intervals of 5 to 360 min after i.v. or i.p. tracer injection. Tracer influx and efflux rates were estimated from the mass of tracer passing into or out of the peritoneal cavity following a bolus injection of tracer into either the blood or the peritoneal cavity. Efflux of 125I-HSA from the peritoneal cavity was markedly reduced (3- to 5-fold) within 1 day of i.p. injection of either type of tumor cell. Significantly reduced efflux preceded any increase in tumor cell number and by itself did not induce peritoneal fluid accumulation. 125I-HSA tracer influx from plasma to peritoneal fluid did not increase detectably until 5 to 7 days after tumor cell injection, when the tumor cell number had increased by 10- to 100-fold. Only at relatively late stages of ascites tumor growth, when the flow rate into the peritoneal cavity had increased relative to the flow rate out of the peritoneum, was there net peritoneal fluid accumulation. Thus, increased influx, in addition to impaired efflux, were required for malignant ascites accumulation. Following i.p. injection, the efflux rates of 125I-HSA always exceeded those of 51Cr-RBC, even in ascites tumor-bearing animals. Furthermore, 125I-HSA tracer disappeared from the peritoneal cavity more rapidly than it appeared in the plasma, suggesting that 125I-HSA moves more rapidly through the channels by which 51Cr-RBC egress from the peritoneum (primarily diaphragmatic lymphatics) and/or has access to additional pathways not open to 51Cr-RBC. Finally, flow rates into and out of the blood and peritoneum were used to obtain kinetic parameters that characterized tracer transport: k1, the rate constant for tracer transport from the blood to the peritoneum; k2, the rate constant for tracer transport from the peritoneal cavity to the blood; and k6, the rate constant for tracer transport from the peritoneal cavity to surrounding interstitial tissue.(ABSTRACT TRUNCATED AT 400 WORDS)     

Analysis of culture fluorescence by a fiber-optic sensor inNicotiana tabacum plant cell culture

The on-line sensing of viable cell weight in plant cell culture process is applied to analysis and control of process. The fiber-optic fluorescence sensor was constructed to measure the NADH-dependent fluorescence inNicotiana tabacum plant cell culture and the analysis of fluorescence signal was done to be correlated with the viable cell weight. The structured kinetic model for cell growth was proposed to estimate the theoretical viable cell weight. The dimensional analysis was proposed for the interpretation of fluorescence signal, in which the path length, the inner filter effect and the hydrodynamic conditions were considered as the key factors on fluorescence signal. The dimensional analysis and empirical correlation of fluorescence signal to viable cell weight was applied to the interpretation of the detected fluorescence signal during cultivation. The proposed interpretation of fluorescence signal using dimensional analysis was well correlated with the viable cell weight estimated by the structured kinetic model as well as by empirical correlation.     

Multiresolution segmentation of respiratory electromyographicsignals

Analysis of respiratory electromyographic (EMG) signals in the study of respiratory control requires the detection of burst activity from background (signal segmentation), and focuses upon the determination of onset and cessation points of the burst activity (boundary estimation). The authors describe a new automated multiresolution technique for signal segmentation and boundary estimation. During signal segmentation, a new transitional segment is defined which contains the boundary between background a burst activity. Boundary estimation is then performed within this transitional segment. Boundary candidates are selected and a probability is attributed to each candidate, using an artificial neural network. The final boundary for a given transitional segment is the boundary estimate with the maximum a posteriori probability. This new method has proved accurate when compared to boundaries chosen by two investigators