柔性有源OLED显示器制造几点技术方面的考虑

AMOLED在柔性显示领域前途似锦。LG显示展示了一款全彩4in柔性AMOLED样机,衬底为80μm厚的不锈钢薄片,曲率达到5cm弯曲半径。本文就此项柔性显示技术所面临的挑战进行了探讨．包括柔性衬底衬底的传送、如何获得特性稳定可靠的TFT以使OLED的亮度和一致性适用于此项技术的商业化推广。     

Mergers and Acquisitions in the Telecommunications Industry: Myths and Reality

This paper investigates how market participants react to mergers and acquisitions (M&As) involving telecommunications companies. The empirical evidence suggests that such activities convey bad news to the market. This is consistent with the synergy trap hypothesis and extant empirical findings of value‐reducing diversification strategies in recent literature. The evidence also indicates that a cross‐border, rather than a domestic M&A deal, is the main driver of the negative market reaction. Further, our evidence of negative impacts on the bidder's business after an M&A reinforces our main finding that market participants, on average, perceive M&A activities to be detrimental to shareholder value. This suggests that value creation or synergy through an M&A deal is not warranted even though it can generate an increase in size of the firm.     

Signaling and Control Procedures Using Generalized MPLS Protocol for IP over an Optical Network

This paper reviews the existing research activities on signaling and control procedures for IP over optical networks. We focus on the IP‐centric signaling and control architecture based on the generalized multi‐protocol label switching (GMPLS) protocol and analyze various scenarios and technical issues for deploying the IP over an optical network. We analyze the signaling and operations and administration and maintenance requirements for integrating an IP network and an optical network in order to cope with the high bandwidth and poor resource granularity of the optical network, including the optical cross‐connect system. On the basis of network architecture and a reference configuration model, we investigate the GMPLS‐based control architecture and interconnection model appropriate for controlling IP bandwidth and optical lambda resources. The signaling and control procedure based on GMPLS on optical user‐network interface and network‐network interface are comparatively investigated to provide the optical lightpath. We also study protection and restoration procedures to protect link failure when it applies to GMPLS signaling.     

Profit Aware Circuit Design Under Process Variations Considering Speed Binning

In this paper, a profit-aware design metric is proposed to consider the overall merit of a design in terms of power and performance. A statistical design methodology is then developed to improve the economic merit of a design considering frequency binning and product price profile. A low-complexity sensitivity-based gate sizing algorithm is developed to improve economic gain of a design over its initial yield-optimized design. Finally, we present an integrated design methodology for simultaneous sizing and bin boundary determination to enhance profit under an area constraint. Experiments on a set of ISCAS'85 benchmarks show in average 19% improvement in profit for simultaneous sizing and bin boundary determination, considering both leakage power dissipation and delay bounds compared to a design initially optimized for 90% yield at iso-area in 70-nm bulk CMOS technology.     

Inverted Staggered Poly-Si Thin-Film Transistor With Planarized SOG Gate Insulator

In this letter, we have studied the inverted staggered thin-film transistor (TFT) using a spin-on-glass (SOG) gate insulator and a low-temperature polycrystalline silicon (poly-Si) by Ni-mediated crystallization of amorphous silicon. The p-channel poly-Si TFT exhibited a field-effect mobility of 48.2 cm²/V ldr s, a threshold voltage of -4.2 V, a gate-voltage swing of 1.2 V/dec, and a minimum off-current of < 4 times 10^-13A/ mum at V_ds = -0.1 V. Therefore, the gate planarization technology by SOG can be applicable to low-cost large-area poly-Si active-matrix displays.     

Design of an Internal Antenna with Near‐Omnidirectional H‐Plane Radiation Pattern over Ultra‐wide Bandwidth

In this paper, an ultra‐wideband internal antenna for use in mobile applications is proposed. The proposed antenna has symmetrical bi‐arm structures printed on the top and bottom of the substrate, and it occupies a compact area of 10 mm × 10 mm × 1 mm. The designed antenna has an impedance bandwidth from 3 GHz to 12 GHz and near omnidirectional radiation patterns over the frequency band of interest. The group delay between two antennas fabricated using the proposed design is less than 0.8 ns, and the maximum gain variation is about 3.16 dB.     

Simulated fault injection: a methodology to evaluate fault tolerantmicroprocessor architectures

A simulation-based fault-injection methodology for validating fault-tolerant microprocessor architectures is described. The approach uses mixed-mode simulation (electrical/logic analysis), and injects transient errors in run-time to assess the resulting fault-impact. To exemplify the methodology, a fault-tolerant architecture which models the digital aspects of a dual-channel, real-time jet-engine controller is used. The level of effectiveness of the dual configuration with respect to single and multiple transients is measured. The results indicate 100% coverage of single transients. Approximately 12% of the multiple transients affect both channels; none result in controller failure since two additional levels of redundancy exist     

Measured average cell rate‐based congestion avoidance scheme

Techniques for congestion control of available bit‐rate (ABR) traffic in ATM (asynchronous transfer mode) networks remain an important issue. Several congestion control schemes have been proposed to adjust the cell rates of sources with a modified or mean allowed cell rate. To make these schemes work effectively in practice, the modified or mean allowed cell rate must converge under all conditions. However, it is not easy to obtain an accurate value, and an inaccurate value could result in network performance degradation such as severe oscillations and considerable unfairness. Therefore, we propose a measured average cell rate‐based congestion avoidance for ABR traffic in ATM networks. The scheme has high throughput and achieves shorter queue lengths without congestion. With measured average cell rate, the scheme provides fast convergence to a start‐up virtual connection (VC) and rate of equalization from different initial conditions of the sources. Thus, this scheme provides better fairness among connections. Copyright © 2001 John Wiley & Sons, Ltd.     

Transforming One‐Dimensional Nanowalls to Long‐Range Ordered Two‐Dimensional Nanowaves: Exploiting Buckling Instability and Nanofibers Effect in Holographic Lithography

Two‐dimensional nanowaves with long‐range order are fabricated by exploiting swelling‐induced buckling of one‐dimensional (1D) nanowalls with nanofibers formed in‐between during holographic lithography of the negative‐tone photoresist SU‐8. The 1D film goes through a constrained swelling in the development stage, and becomes buckled above the critical threshold. The degree of lateral undulation can be controlled by tuning the pattern aspect ratio (height/width) and exposure dosage. At a high aspect ratio (e.g., 6) and a high exposure dosage, nanofibers (30–50 nm in diameter) are formed between the nanowalls as a result of overlapping of low crosslinking density regions. By comparing experimental results with finite‐element analysis, the buckling mechanism is investigated, which confirms that the nanofibers prevent the deformed nanowalls from recovery to their original state, thus, leading to long‐range ordered two‐dimensional (2D) wavy structures. The film with nanowaves show weaker reflecting color under an ambient light and lower transmittance compared to the straight nanowalls. Using double exposure through a photomask, patterns consisting of both nanowaves and nanowalls for optical display are created.     

Aptamer‐Functionalized Multidimensional Conducting‐Polymer Nanoparticles for an Ultrasensitive and Selective Field‐Effect‐Transistor Endocrine‐Disruptor Sensors

An endocrine disruptor (ED) is a type of xenobiotic compound that can cause serious diseases related to the estrous cycle, as well as various types of cancer. At low ED concentrations, estrogen receptors may respond as they would under physiological conditions. In this work, aptamer‐functionalized multidimensional conducting‐polymer (3‐carboxylate polypyrrole) nanoparticles (A_M_CPPyNPs) are fabricated for use in an FET sensor to detect bisphenol A (BPA). The multidimensional system, M_CPPyNPs, is first produced by means of dual‐nozzle electrospray of pristine CPPyNPs and vapor deposition polymerization of additional conducting polymer. The M_CPPyNPs are then immobilized on an amine‐functionalized (–NH₂) interdigitated‐array electrode substrate, through the formation of covalent bonds with amide groups (–CONH). The amine‐functionalized BPA‐binding aptamer is then introduced in the same way as that for M_CPPyNP immobilization. The resulting A_M_CPPyNP‐based FET sensors exhibit ultrasensitivity and selectivity towards BPA at unprecedentedly low concentrations (1 fm ) and among molecules with similar structures. Additionally, due to the covalent bonding involved in the immobilization processes, a longer lifetime is expected for the FET sensor.