Familial hypokalemic periodic paralysis. Clinical, diagnostic and therapeutic aspects

A model of induced lactation was modified to examine the effects of bovine prolactin (bPRL) and bovine placental lactogen (bPL) on mammary growth and differentiation. Thirty-two peripubertal, non-pregnant Holstein heifers were given daily s.c. injections of oestradiol (0.05 mg/kg) and progesterone (0.25 mg/kg) for 7 days to initiate mammary growth. Treatment with bromocriptine (40 mg/3 days) reduced serum PRL concentrations to approximately 25% of pretreatment levels, for the duration of the study. On the day following the last steroid injection, groups of eight heifers were given twice daily s.c. injections of either saline (negative control), recombinant bPRL (rbPRL; 80 mg/day) or recombinant bPL (rbPL; 80 and 160 mg/day) for 7 days. At the end of this period (day 15), growth and differentiation of the mammary glands were assessed. Treatment with rbPL increased total mammary DNA above control value by 50 and 60% for the 80 and 160 mg/day doses respectively. However, total DNA was not different for the control and rbPRL-treated groups. The blood serum concentration of alpha-lactalbumin was measured daily throughout the study and used as an index of mammary differentiation. Both rbPRL and rbPL stimulated mammary differentiation (i.e. induction of milk synthesis), although rbPRL appeared to be more potent than rbPL. These results indicate that rbPL is lactogenic in vivo and strongly suggest that bPL is a mammary mitogen.     

Role of conserved Asn-Tyr-Asp-Tyr sequence in bacterial copper/2,4, 5-trihydroxyphenylalanyl quinone-containing histamine oxidase

Copper amine oxidase contains a covalently bound quinonoid cofactor, 2,4,5-trihydroxyphenylalanyl quinone (TPQ), which is synthesized by post-translational modification of a specific tyrosyl residue occurring in the highly conserved sequence, Asn-Tyr-(Asp/Glu)-Tyr. To elucidate the role(s) of the conserved sequence in the biogenesis of TPQ, each of the corresponding residues at positions 401-404 in the recombinant histamine oxidase from Arthrobacter globiformis has been replaced with other amino acids by site-directed mutagenesis. When Asn-401 was changed to Asp or Gln, the rate of TPQ formation by copper-dependent self-processing was 10(3)- to 10(4)-fold slower than in the wild-type enzyme. When Tyr-402 was replaced by Phe, TPQ was not formed at all, showing that Tyr-402 is essential as the precursor to TPQ. In contrast, Asp-403 could be replaced by Glu without changes in the rate of TPQ formation, whereas its replacement by Asn led to a marked decrease. Furthermore, when Tyr-404 was changed to Phe, TPQ was formed swiftly on incubation with copper ions, but the TPQ enzyme exhibited very low activity with altered substrate specificity. These results collectively indicate that a very rigorous structural motif is required for efficient formation of TPQ and for the catalytic activity in the active site of copper amine oxidases.     

The 9p21 region in bladder cancer cell lines: large homozygous deletion inactivate the CDKN2, CDKN2B and MTAP genes

Homozygous and hemizygous deletions of 9p21 are the earliest and most common genetic alteration in bladder cancer. The identification of two cell cycle regulators, CDKN2 and CDKN2B, that map to the common region of deletion has prompted the hypothesis that they are critical tumor suppressor genes in this malignancy. However, controversy as to whether these genes are the only or even the most important target in bladder cancer oncogenesis remains. To more clearly determine the effect of these 9p21 alterations, we mapped the homozygous deletions and performed a detailed mutational and expression analysis for CDKN2, CDKN2B and a closely linked gene, methylthioadenoside phosphorylase (MTAP), in 16 established bladder cancer cell lines. Nine of the 16 lines exhibit large (30 to > 2000 kb) homozygous deletions on 9p21. All deletions include at least one exon of CDKN2, eight of nine include CDKN2B, and six of nine include MTAP. MTAP function correlates with the genomic deletions. SSCP and sequence analysis does not reveal any inactivating point mutations of CDKN2 or of CDKN2B in any of the cell lines without homozygous deletions, and all express the CDKN2 and the CDKN2B mRNA as well as the encoded p16 protein. The p16 protein levels vary widely and are correlated with absent pRb expression. We conclude that the 9p21 deletions in bladder cancer usually inactivate the CDKN2. CDKN2B, and MTAP genes but that CDKN2 is the most common target. Other mechanisms for inactivating this gene in bladder cancer appear to be uncommon.     

Reduction of loading effect by tungsten etchback in a magneticallyenhanced reactive ion etcher

The plug loading effect occurring during the etchback of tungsten was investigated in a magnetically enhanced reactive ion etcher using SF ₆/Ar mixtures. It was found that while the plug loading effect is independent of varying SF₆/Ar flow rate ratio and magnetic field intensity, it is reduced under the condition of high selectivity of tungsten relative to TiN which was achieved at high chamber pressure and low RF power. It is proposed that when TiN is used as a glue layer, the W etch rate enhancement in the plug is mainly controlled by a local loading effect. Under the optimized etchback conditions the plug loss was successfully controlled without the tungsten residue left on severe topology     

Analysis of culture fluorescence by a fiber-optic sensor inNicotiana tabacum plant cell culture

The on-line sensing of viable cell weight in plant cell culture process is applied to analysis and control of process. The fiber-optic fluorescence sensor was constructed to measure the NADH-dependent fluorescence inNicotiana tabacum plant cell culture and the analysis of fluorescence signal was done to be correlated with the viable cell weight. The structured kinetic model for cell growth was proposed to estimate the theoretical viable cell weight. The dimensional analysis was proposed for the interpretation of fluorescence signal, in which the path length, the inner filter effect and the hydrodynamic conditions were considered as the key factors on fluorescence signal. The dimensional analysis and empirical correlation of fluorescence signal to viable cell weight was applied to the interpretation of the detected fluorescence signal during cultivation. The proposed interpretation of fluorescence signal using dimensional analysis was well correlated with the viable cell weight estimated by the structured kinetic model as well as by empirical correlation.     

Multiresolution segmentation of respiratory electromyographicsignals

Analysis of respiratory electromyographic (EMG) signals in the study of respiratory control requires the detection of burst activity from background (signal segmentation), and focuses upon the determination of onset and cessation points of the burst activity (boundary estimation). The authors describe a new automated multiresolution technique for signal segmentation and boundary estimation. During signal segmentation, a new transitional segment is defined which contains the boundary between background a burst activity. Boundary estimation is then performed within this transitional segment. Boundary candidates are selected and a probability is attributed to each candidate, using an artificial neural network. The final boundary for a given transitional segment is the boundary estimate with the maximum a posteriori probability. This new method has proved accurate when compared to boundaries chosen by two investigators     

Strength,toughness and R-curve behaviour of SiC whisker-reinforced composite Si3N4 with reference to monolithic Si3N4

The flexural strength and fracture toughness of 30 vol% SiC whisker-reinforced Si₃N₄ material were determined as a function of temperature from 25 to 1400°C in an air environment. It was found that both strength and toughness of the composite material were almost the same as those of the monolithic counterpart. The room-temperature strength was retained up to 1100°C; however, appreciable strength degradation started at 1200°C and reached a maximum at 1400°C due to stable crack growth. In contrast, the fracture toughness of the two materials was independent of temperature with an average value of 5.66 MPam^1/2. It was also observed that the composite material exhibited no rising R-curve behaviour at room temperature, as was the case for the monolithic material. These results indicate that SiC whisker addition to the Si₃N₄ matrix did not provide any favourable effects on strength, toughness and R-curve behaviour.     

Non-linear properties of polymer cellular materials with a negative Poisson's ratio

Negative Poisson's ratio polymeric cellular solids (re-entrant foams) were studied to ascertain the optimal processing procedures which give rise to the smallest value of Poisson's ratio. The non-linear stress-strain relationship was determined for both conventional and re-entrant foams; it depended upon the permanent volumetric compression achieved during the processing procedure. Poisson's ratio of re-entrant foam measured as a function of strain was found to have a relative minimum at small strains. The toughness of re-entrant foam increased with permanent volumetric compression, and hence with density.     

Genetic selection strategies: computer modeling

There are four primary factors to consider in genetic selection strategies: 1) accuracy of selection, 2) selection intensity, 3) effective population size, and 4) mating system. Current theory indicates that optimum response to selection is achieved by maximizing the first three factors and using a mating systems that allows optimization of reproductive characteristics in dam lines and production characteristics in sire lines. However, with limited resources, compromises among the first three factors are needed. Simulations are useful for examining those compromises. Unrealistic simplifying assumptions are necessary for analytic theoretical results and thus do not address real world breeding problems. Using simulations, the relationship between selection accuracy, which is increased by use of family selection indices or Best Linear Unbiased Prediction (BLUP), and response to selection was examined. Results show that those procedures place a great restriction on effective population size, which offsets most of their advantage, i.e., there is too little emphasis on effective population size. A revision of the methodology and a reappraisal of the results of selection theory for optimization of genetic response is required. Another relationship that is of fundamental importance in breeding programs is that between selection intensity and effective population size. Analytical results for the additive case have been developed but have never been extended to heterotic traits. A gene level simulation program was developed to examine that relationship. Results show that the optimal selection strategy depends on the trait being selected. For additive traits and in the short term (20 generations), one should maximize selection intensity. For heterotic traits, an intermediate proportion (25% of each sex) gives optimal response. In all breeding strategies, primary attention must be given to the rate of inbreeding, which is increased by increasing either accuracy of selection or selection intensity. Inbreeding reduces response to selection in two ways. First, for both additive and nonadditive traits, inbreeding is a measure of the amount of random genetic drift that has occurred. Genetic drift causes loss of favorable alleles. Once lost, those alleles can never be recovered and thus genetic drift lowers the selection limit. Second, for heterotic traits, inbreeding results in a depression of the mean caused by directional dominance.