Constructing Internet coordinate system based on delay measurement

In this paper, we consider the problem of how to represent the locations of Internet hosts in a Cartesian coordinate system to facilitate estimation of network distances among arbitrary Internet hosts. We envision an infrastructure that consists of beacon nodes and provides the service of estimating network distance between pairs of hosts without direct delay measurement. We show that the principal component analysis (PCA) technique can effectively extract topological information from delay measurements between beacon hosts. Based on PCA, we devise a transformation method that projects the raw distance space into a new coordinate system of (much) smaller dimensions. The transformation retains as much topological information as possible and yet enables end hosts to determine their coordinates in the coordinate system. The resulting new coordinate system is termed as the Internet Coordinate System (ICS). As compared to existing work (e.g., IDMaps and GNP), ICS incurs smaller computation overhead in calculating the coordinates of hosts and smaller measurement overhead (required for end hosts to measure their distances to beacon hosts). Finally, we show via experiments with both real-life and synthetic data sets that ICS makes robust and accurate estimates of network distances, incurs little computational overhead, and its performance is not susceptible to the number of beacon nodes (as long as it exceeds a certain threshold) and the network topology.     

Effects of extended dislocations on charge distribution in GaN epilayer

We have investigated the effect of extended dislocations (0.5-3 μm) on charge distribution in GaN epilayer grown by metalorganic chemical vapor deposition on (0001) sapphire using atomic force microscopy (AFM) and scanning surface potential microscopy (SSPM). It has been observed for the surface at the extended dislocations present in undoped GaN film to be negatively charged showing 0.04-0.2 V higher potential relative to regions that contain no dislocations. In addition to the higher potential at the dislocation core, the surrounding surfaces, including the edge of the dislocations, are also negatively charged in a symmetric way around the dislocations revealing crater-shaped higher potential regions (∼0.04 V) relative to surrounding dislocation-free area. The experimental results show that the protrusion-type of dislocation is also negatively charged and its potential is dependent on the size of dislocation.     

Doping Effects on Thermoelectric Properties in the Mg2Sn System

A weak point of Mg₂X thermoelectrics is the absence of a p-type composition, which motivates research into the Mg₂Sn system. Mg₂Sn thermoelectrics were fabricated by a vacuum melting method and a spark plasma sintering process. As a result, Mg₂Sn single phases were acquired in a wide range of Mg-to-Sn atomic ratios (67:33 to 71:29), showing slightly different thermoelectric characteristics. However, the thermoelectric properties of the undoped system were not sufficient for application in commercial production. To maximize the p-type characteristics, many atoms [Ni (VIIIA), Cu (IB), Ag (IB), Zn (IIB), and In (IIIB)] were doped into the Mg₂Sn phase. Among them, the power factor values increased only in the Ag-doped case. Ag-doping resulted in a power factor that was more than 10 times larger than the value in the undoped case. This result could be important for developing p-type polycrystalline thermoelectrics in the Mg₂X (X?=?Si, Sn) system. However, other atoms [Ni (VIIIA), Cu (IB), Zn (IIB), and In (IIIB)] were not determined to act as acceptor atoms. The maximum ZT value for the Ag-doped Mg₂Sn thermoelectric was more than 0.18, which is comparable to the value for the n-type Mg₂Si system.     

An Efficient Evolution Method From TDM-PON to Next-Generation PON

An efficient evolution method from a time-division-multiplexing passive optical network (TDM-PON) is proposed and demonstrated for a next-generation PON. A single-type three-port wavelength band combiner/splitter enables a simple and efficient evolution of TDM-PON maintaining the current PON infrastructure and wavelength plan. The crosstalk between the TDM-PON and next-generation PON is negligibly small     

Impact of node distance on selfish replica allocation in a mobile ad-hoc network

Many data replication techniques have been proposed to minimize performance degradation caused by network partitioning in a mobile ad-hoc network. Most of them assume that all mobile nodes collaborate fully in terms of sharing their memory space. However, in reality, some nodes may selfishly decide to only cooperate partially, or not at all, with other nodes. Recently, a new approach to selfish replica allocation has been proposed to handle node selfishness. However, there is still much room for improvement. We empirically observe that the previous selfish replica allocation strategy suffers from long query delay and poor data accessibility, because it utilizes only non-selfish nodes that may be faraway nodes. In this paper, we propose a novel replica allocation strategy in the presence of selfish nodes, that takes into account both selfish behavior and node distance. Moreover, through a novel node leveling technique, we utilize the memory space of all connected nodes, including selfish nodes. The conducted simulations demonstrate that the proposed strategy outperforms existing replica allocation techniques in terms of data accessibility, query delay, and communication cost.     

Near-Field and Far-Field Analyses of Alternating Impedance Electromagnetic Bandgap (AI-EBG) Structure for Mixed-Signal Applications

This paper presents near-field (NF) and far-field (FF) analysis of alternating impedance electromagnetic bandgap (AI-EBG) structure in packages and boards. Three test vehicles have been designed and fabricated for NF and FF measurements. Simulation results using a full-wave solver (SONNET) have been compared with measurement results. This paper investigates the radiation due to return current on different reference planes. The analysis results from simulations and measurements provide important guidelines for design of the AI-EBG structure based power distribution network for noise isolation and suppression in mixed-signal systems     

柔性有源OLED显示器制造几点技术方面的考虑

AMOLED在柔性显示领域前途似锦。LG显示展示了一款全彩4in柔性AMOLED样机,衬底为80μm厚的不锈钢薄片,曲率达到5cm弯曲半径。本文就此项柔性显示技术所面临的挑战进行了探讨．包括柔性衬底衬底的传送、如何获得特性稳定可靠的TFT以使OLED的亮度和一致性适用于此项技术的商业化推广。     

Signaling and Control Procedures Using Generalized MPLS Protocol for IP over an Optical Network

This paper reviews the existing research activities on signaling and control procedures for IP over optical networks. We focus on the IP‐centric signaling and control architecture based on the generalized multi‐protocol label switching (GMPLS) protocol and analyze various scenarios and technical issues for deploying the IP over an optical network. We analyze the signaling and operations and administration and maintenance requirements for integrating an IP network and an optical network in order to cope with the high bandwidth and poor resource granularity of the optical network, including the optical cross‐connect system. On the basis of network architecture and a reference configuration model, we investigate the GMPLS‐based control architecture and interconnection model appropriate for controlling IP bandwidth and optical lambda resources. The signaling and control procedure based on GMPLS on optical user‐network interface and network‐network interface are comparatively investigated to provide the optical lightpath. We also study protection and restoration procedures to protect link failure when it applies to GMPLS signaling.     

Profit Aware Circuit Design Under Process Variations Considering Speed Binning

In this paper, a profit-aware design metric is proposed to consider the overall merit of a design in terms of power and performance. A statistical design methodology is then developed to improve the economic merit of a design considering frequency binning and product price profile. A low-complexity sensitivity-based gate sizing algorithm is developed to improve economic gain of a design over its initial yield-optimized design. Finally, we present an integrated design methodology for simultaneous sizing and bin boundary determination to enhance profit under an area constraint. Experiments on a set of ISCAS'85 benchmarks show in average 19% improvement in profit for simultaneous sizing and bin boundary determination, considering both leakage power dissipation and delay bounds compared to a design initially optimized for 90% yield at iso-area in 70-nm bulk CMOS technology.     

Design of an Internal Antenna with Near‐Omnidirectional H‐Plane Radiation Pattern over Ultra‐wide Bandwidth

In this paper, an ultra‐wideband internal antenna for use in mobile applications is proposed. The proposed antenna has symmetrical bi‐arm structures printed on the top and bottom of the substrate, and it occupies a compact area of 10 mm × 10 mm × 1 mm. The designed antenna has an impedance bandwidth from 3 GHz to 12 GHz and near omnidirectional radiation patterns over the frequency band of interest. The group delay between two antennas fabricated using the proposed design is less than 0.8 ns, and the maximum gain variation is about 3.16 dB.