大颗粒尿素造粒工艺简介

介绍了大颗粒尿素造粒工艺，着重介绍了荷兰NSM公司的流化床造粒技术和法国K－T公司的流化床转鼓造粒（FDG）技术。     

喷射轧制Fe-4.5%Si硅钢片的组织和性能

采用喷射成形和轧制工艺制备了厚度为0.5mm的Fe-4.5%Si高硅钢片，并对其密度、显微组织和电磁性能进行了测试分析，研究结果表明：在最佳的喷射成形和轧制工艺条件下，所制备硅钢片的磁感应强度B25为1.544T、B50为1.641T；铁损P1050为1.437W/kg、P1550为3.43W/kg，说明喷射成形轧制技术可以制备出高磁感应强度、低铁损的高硅钢片。     

露天矿半连续工艺技术应用现状及发展前景

介绍了露天矿半连续工艺技术国内外应用现状、研究成果以及发展趋势。     

八尺门特大桥φ2.8 m桩基施工质量控制

介绍了八尺门特大桥的工程建况、水文地质情况和施工方案的确定，并较为系统、全面地阐述了该大桥φ2.8m大直径钻孔桩的施工过程。从钢护筒沉桩到灌注过程、每道施工程序、采用的方法、质量的控制要点以及施工中的其它问题进行了较具体的讨论与分析，取得了良好的施工效果。     

FCC原料掺入裂解焦油的研究及其机理分析

在催化裂化固定流化床小试装置上，对裂化原料中掺入富含芳烃的添加剂－裂解焦油进行了考察，确定了添加剂的最佳掺入量为1％，与不掺添加剂的裂化原料相比，其汽油产率提高，生焦量和干气产率减少，汽油选择性变好。同时通过对添加剂的原料体系的结构研究，对添加剂影响催化裂化过程的机理进行了探讨。     

论坛消息的语义漂移分析

引入多维文档模型来组织论坛消息的描述性特征和语义性特征，并在多维索引的基础上，提出了加窗分析技术。目的在于分析论坛站点中语义漂移现象，进而发现论坛中的完整语义信息单元。     

在役超高压水晶釜主要检测方法

介绍了在役超高压水晶釜的常见缺陷以及应用超声波探伤、磁粉探伤、金相分析等无损检测方法对其进行在役检验的要点.     

A new efficient method for one‐pot conversions of aryl carboxylic acids into nitriles without solvent

A new efficient method for synthesising nitriles, important organic reagents, is reported in this paper. In an environmentally benign solvent‐free system, aryl carboxylic acids were converted into the corresponding nitriles via one‐pot reactions, by amidation with ethyl carbamate followed by dehydration with thionyl chloride, in excellent yields. The results showed that the method has the advantages of lower cost, higher yield, less pollution and greater ease of work‐up. Copyright © 2008 Society of Chemical Industry     

Facile modifications of polyimide via chloromethylation: II. Synthesis and characterization of thermocurable transparent polyimide having methylene acrylate side groups

From chloromethylated polyimide, a useful starting material for modification of aromatic polyimides, a thermocurable transparent polyimide having acrylate side groups was prepared. In the presence of 1,8‐diazabicyclo[5,4,0]undec‐7‐ene, chloromethylated polyimide was esterified with acrylic acid to synthesize poly(imide methylene acrylate). The polymer was soluble in organic solvent, which makes it possible to prepare a planar film by spin coating. The polymer film became insoluble after thermal treatment at 230 °C for 30 min. Optical transparency of the film at 400 nm (for 1 µm thickness) was higher than 98 % and not affected by further heating at 230 °C for 250 min. Adhesion properties measured by the ASTM D3359‐B method ranged from 4B to 5B. Preliminary results of planarization testing showed a high degree of planarization (DOP) value (>0.53). These properties demonstrate that poly(imide methylene acrylate) could be utilized as a thermocurable transparent material in fabricating display devices such as TFT‐LCD. Copyright © 2004 Society of Chemical Industry     

S盒设计中的一种新准则

本文提出了强扩散准则,强雪崩效应以及扩散效应的逼近优势等相关概念,给出了差分均匀性与强k阶扩散准则之间的相互关系,利用给出的设计准则改进了Rijndael密码的S盒。