Alginate coating as carrier of oligofructose and inulin and to maintain the quality of fresh-cut apples

The aim of this study was to apply an edible coating containing prebiotics such as oligofructose and inulin to fresh-cut apple wedges. An assessment of the quality, sensory, polyphenol, and volatile attributes of coated and uncoated fresh-cut apple wedges was also undertaken. Fructan analysis showed that all prebiotics remained stable over the 14-d storage period and an intake of 100 g of apple supplies 1 to 3 g of prebiotics. Browning index, firmness, acidity remained stable throughout the 14 d compared to the control while applying prebiotic coatings resulted in an increase in soluble solids. Sensory and visual assessment indicated acceptable quality of apple wedges coated with prebiotics. HPLC analysis showed that levels of polyphenolic compounds were more stable in coated apple wedges (without prebiotic inclusions) than in uncoated control apples. No difference was found between O(2) and CO(2) headspace concentration of coated and uncoated samples. Significant differences (P < 0.001) were found for headspace volatile production between the samples. Most coated samples showed lower volatile production in the headspace than uncoated samples.     

Stacked GaAs quantum dots fabricated by refilling of self-organized nanoholes: optical properties and post-growth annealing

We study the photoluminescence and impact of post-growth annealing of stacked, strain-free GaAs quantum dots fabricated by refilling of self-organized nanoholes using molecular beam epitaxy. Temperature- and power-dependent photoluminescence studies reveal an excellent optical quality of the quantum-dot stack. After high-temperature post-growth annealing only slight blueshifts and an increase in full width at half-maximum of the photoluminescence peak are observed, indicating very high-temperature stability and crystalline quality of the stacked GaAs quantum-dot structure.     

Synthesis of novel tricalcium phosphate-bioactive glass composite and functionalization with rhBMP-2

A functionalization is required for calcium phosphate-based bone substitute materials to achieve an entire bone remodeling. In this study it was hypothesized that a tailored composite of tricalcium phosphate and a bioactive glass can be loaded sufficiently with rhBMP-2 for functionalization. A composite of 40 wt% tricalcium phosphate and 60 wt% bioactive glass resulted in two crystalline phases, wollastonite and rhenanite after sintering. SEM analysis of the composite’s surface revealed a spongious bone-like morphology after treatment with different acids. RhBMP-2 was immobilized non-covalently by treating with chrome sulfuric acid (CSA) and 3-aminopropyltriethoxysilane (APS) and covalently by treating with CSA/APS, and additionally with 1,1′-carbonyldiimidazole. It was proved that samples containing non-covalently immobilized rhBMP-2 on the surface exhibit significant biological activity in contrast to the samples with covalently bound protein on the surface. We conclude that a tailored composite of tricalcium phosphate and bioactive glass can be loaded sufficiently with BMP-2.     

Allocation of CO2 emission permits—Economic incentives for emission reductions in developing countries

The economic impacts on developing regions following a global cap and trade system for carbon dioxide are assessed through the use of an energy-economy systems model. Both an equal per capita allocation and a contraction and convergence allocation with convergence of the per capita emissions by 2050 are shown to offer economic incentive for Africa, India and probably also Latin America to accept binding emissions commitments under a 450 ppm carbon dioxide stabilization scenario. The gain for Latin America is mainly a result of increased export revenues from sales of bio-fuels as a result of the climate policy. It is, on the other hand, unlikely that these allocation approaches would offer an economic incentive for China to join the regime because of its high economic growth, present higher per capita emissions than India and Africa, and more costly mitigation options than Latin America. A more stringent allocation for developing countries such as contraction with convergence of the per capita emissions by the end of this century is estimated to generate reduced net gains or increased net losses for the developing regions (though Africa is still expected to gain).     

Au@Hg Nanoalloy Formation Through Direct Amalgamation: Structural,Spectroscopic, and Computational Evidence for Slow Nanoscale Diffusion

Dynamic core–shell nanoparticles have received increasing attention in recent years. This paper presents a detailed study of Au–Hg nanoalloys, whose composing elements show a large difference in cohesive energy. A simple method to prepare Au@Hg particles with precise control over the composition up to 15 atom% mercury is introduced, based on reacting a citrate stabilized gold sol with elemental mercury. Transmission electron microscopy shows an increase of particle size with increasing mercury content and, together with X‐ray powder diffraction, points towards the presence of a core–shell structure with a gold core surrounded by an Au–Hg solid solution layer. The amalgamation process is described by pseudo‐zero‐order reaction kinetics, which indicates slow dissolution of mercury in water as the rate determining step, followed by fast scavenging by nanoparticles in solution. Once adsorbed at the surface, slow diffusion of Hg into the particle lattice occurs, to a depth of ca. 3 nm, independent of Hg concentration. Discrete dipole approximation calculations relate the UV–vis spectra to the microscopic details of the nanoalloy structure. Segregation energies and metal distribution in the nanoalloys were modeled by density functional theory calculations. The results indicate slow metal interdiffusion at the nanoscale, which has important implications for synthetic methods aimed at core–shell particles.     

Photovoltaic Devices: Highly Conductive PEDOT:PSS Electrode with Optimized Solvent and Thermal Post‐Treatment for ITO‐Free Organic Solar Cells (Adv. Funct. Mater. 6/2011)

Highly conductive poly(3,4‐ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) films as stand‐alone electrodes for organic solar cells have been optimized using a solvent post‐treatment method. The treated PEDOT:PSS films show enhanced conductivities up to 1418 S cm^?1, accompanied by structural and chemical changes. The effect of the solvent treatment on PEDOT:PSS has been investigated in detail and is shown to cause a reduction of insulating PSS in the conductive polymer layer. Using these optimized electrodes, ITO‐free, small molecule organic solar cells with a zinc phthalocyanine (ZnPc):fullerene C₆₀ bulk heterojunction have been produced on glass and PET substrates. The system was further improved by pre‐heating the PEDOT:PSS electrodes, which enhanced the power conversion efficiency to the values obtained for solar cells on ITO electrodes. The results show that optimized PEDOT:PSS with solvent and thermal post‐treatment can be a very promising electrode material for highly efficient flexible ITO‐free organic solar cells.     

Cloud Based Infrastructure,the New Business Possibilities and Barriers

Realization of the cloud computing infrastructure requires access to data anywhere, anytime at any device at a sufficient perceived quality of service. Many Western European countries, such as Denmark, have a high percentage of individuals (inhabitants and companies) that has access to broadband internet via cable, satellite and mobile. This gives a unique position in roll-out and deploying intelligent cloud based services that can be applied for a number of purposes, but where lack of sufficient capacity/quality and IT readiness will be barriers in realization of the “Global Information Multimedia Communication Village (GIMCV)”. Broadband is here defined as more than 2 Mbps. In this paper, the combination of e-commerce, cloud computing and broadband infrastructure has our focus, and its unique possibilities for the overall IT society. However, it is also about a significant number of Small and Medium sized Enterprises (SMEs) that today applies manual billing systems or Excel like systems in combination with severe lacks of sufficient IT skills. This means that the most commonly used systems are the ones requiring the most of our time. Therefore, the move for the SME towards e-commerce and electronic processes has a significant economical potential for the SMEs. E-commerce and other internet based services will simplify their business, and hence allow the SMEs to focus on their core business which was their raison d’être. In addition to this can be added other fundamental IT systems that will help their business, but that is outside the scope of this paper. Furthermore, this paper focuses on infrastructural barriers and cloud computing; not only focusing on bandwidth, but also the entire issue of service offering. Services offered via cloud computing solutions will minimize the SMEs investment in own hardware (HW), software (SW) and maintenance. The focus is also the upgrade to a superior infrastructure that provides the platform for efficient cloud computing, for e-commerce, and beyond.     

Optical tweezers for synchrotron radiation probing of trapped biological and soft matter objects in aqueous environments

Investigations of single fragile objects manipulated by optical forces with high brilliance X-ray beams may initiate the development of new research fields such as protein crystallography in an aqueous environment. We have developed a dedicated optical tweezers setup with a compact, portable, and versatile geometry for the customary manipulation of objects for synchrotron radiation applications. Objects of a few micrometers up to a few tens of micrometers size can be trapped for extended periods of time. The selection and positioning of single objects out of a batch of many can be performed semi-automatically by software routines. The performance of the setup has been tested by wide-angle and small-angle X-ray scattering experiments on single optically trapped starch granules, using a synchrotron radiation microbeam. We demonstrate here for the first time the feasibility of microdiffraction on optically trapped protein crystals. Starch granules and insulin crystals were repeatedly raster-scanned at about 50 ms exposure/raster-point up to the complete loss of the structural order. Radiation damage in starch granules results in the appearance of low-angle scattering due to the breakdown of the polysaccharide matrix. For insulin crystals, order along the densely packed [110] direction is preferentially maintained until complete loss of long-range order.     

Targeted luminescent near-infrared polymer-nanoprobes for in vivo imaging of tumor hypoxia

Polystyrene nanoparticles (PS-NPs) were doped with an oxygen-sensitive near-infrared (NIR)-emissive palladium meso-tetraphenylporphyrin and an inert reference dye which are both excitable at 635 nm. The nanosensors were characterized with special emphasis on fundamental parameters such as absolute photoluminescence quantum yield and fluorescence lifetime. The PS-NPs were employed for ratiometric dual-wavelength and lifetime-based photoluminescent oxygen sensing. They were efficiently taken up by cultured murine alveolar macrophages, yielding a characteristic and reversible change in ratiometric response with decreasing oxygen concentration. This correlated with the cellular hypoxic status verified by analysis of hypoxia inducible factor-1α (HIF-1α) accumulation. In addition, the surface of PS-NPs was functionalized with polyethylene glycol (PEG) and the monoclonal antibody herceptin, and their binding to HER2/neu-overexpressing tumor cells was confirmed in vitro. First experiments with tumor-bearing mouse revealed a distinctive ratiometric response within the tumor upon hypoxic condition induced by animal sacrifice. These results demonstrate the potential of these referenced NIR nanosensors for in vitro and in vivo imaging that present a new generation of optical probes for oncology.     

Rapid, online quantification of H2S in JP-8 fuel reformate using near-infrared cavity-enhanced laser absorption spectroscopy

One of the key challenges in reforming military fuels for use with fuel cells is their high sulfur content, which can poison the fuel cell anodes. Sulfur-tolerant fuel reformers can convert this sulfur into H(2)S and then use a desulfurizing bed to remove it prior to the fuel cell. In order to optimize and verify this desulfurization process, a gas-phase sulfur analyzer is required to measure H(2)S at low concentrations (<1 ppm(v)) in the presence of other reforming gases (e.g., 25-30% H(2), 10-15% H(2)O, 15% CO, 5% CO(2), 35-40% N(2), and trace amounts of light hydrocarbons). In this work, we utilize near-infrared cavity-enhanced optical absorption spectroscopy (off-axis ICOS) to quantify H(2)S in a JP-8 fuel reformer product stream. The sensor provides rapid (2 s), highly precise (±0.1 ppm(v)) measurements of H(2)S in reformate gases over a wide dynamic range (0-1000 ppm(v)) with a low detection limit (3σ = ±0.09 ppm(v) in 1 s) and minimal cross-interferences from other present species. It simultaneously quantifies CO(2) (±0.2%), CH(4) (±150 ppm(v)), C(2)H(4) (±30 ppm(v)), and H(2)O (±300 ppm(v)) in the reformed gas for a better characterization of the fuel reforming process. Other potential applications of this technology include measurement of coal syngas and H(2)S in natural gas. By including additional near-infrared, distributive feedback diode lasers, the instrument can also be extended to other reformate species, including CO and H(2).